Eccentric Sanders

From CoMakingSpace Wiki

Revision as of 20:26, 24 January 2019 by Lukas (talk | contribs) (moving sanding disc information to its own page)

ToolInfoBox

Eccentric Sanders

Festo RO 2 E.jpg
Synonyms: geared eccentric sanders,
random orbital sanders,
DE: (Getriebe-)Exzenterschleifer,
Handscheibenschleifmaschinen
Type: power sanders
Material: wood
Used with: sanding discs
Access Requirements: after personal introduction
Tutors: Lukas, Patrick
Similar (More or Less): belt sander

An eccentric sander is very useful for finishing surfaces. The major advantage of this kind of sander is the irregular motion of the sanding disc which greatly reduces unsightly marks on the workpiece.

Safety

When using an eccentric sander, always take the time to properly clamp down your workpiece, hook up the shop vac and wear safety glasses. Depending on your material, you may also need a dust mask.

As with all our sanders, please go outside if you can't keep the airborne dust to a minimum!

Suggested Reading


Festo RO 2 E

ToolInfoBox

Festo RO 2 E

Festo RO 2 E.jpg
Used with: 150 mm sanding discs with 8 holes
Location: wood workshop
Tutors: Lukas, Patrick
Manual: manuall.de

The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (keine Anlaufsicherung)!



Festo RO 150 E

ToolInfoBox

Festo RO 150 E

Festo RO 150 E.jpg
Used with: 150 mm sanding discs with 8 holes
Location: wood workshop (ladder shelf)
Access Requirements: after repair (see #25) & personal introduction
Manual: nearly identical to Festo RO 2 E (manuall.de)

The Festo RO 150 E needs to be repaired (see #25) before it can be added to the wood workshop. Since the other one is working, this is not overly urgent though.