Eccentric Sanders: Difference between revisions

From CoMakingSpace Wiki

m (added commissioning template)
(→‎Festo RO 2 E: this is the repaired one)
Line 56: Line 56:
|tool name=Festo RO 2 E
|tool name=Festo RO 2 E
|image=
|image=
|access=after repair (see [https://github.com/comakingspace/do-something/issues/25 #25]) & [[Handheld Sander Introduction|personal introduction]]
|access=after [[Handheld Sander Introduction|personal introduction]]
|location=[[CoMaking Room|CoMaking room]] (for now)
|location=[[CoMaking Room|CoMaking room]] (for now)
|tutors=
|tutors=
Line 62: Line 62:
|used with=150 mm [[Sanding Discs|sanding discs]] with holes
|used with=150 mm [[Sanding Discs|sanding discs]] with holes
}}
}}
The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (''keine Anlaufsicherung'')!


<br clear=all>
<br clear=all>
== Festo RO 150 E ==
== Festo RO 150 E ==
{{ToolInfoBox
{{ToolInfoBox

Revision as of 17:29, 26 September 2018

ToolInfoBox

Eccentric Sanders

Tool-default.png
Synonyms: geared eccentric sanders,
random orbital sanders,
DE: (Getriebe-)Exzenterschleifer
Type: power tool
Material: wood
Used with: sanding discs
Access Requirements: after they have been repaired (see #25
Tutors: Lukas
Similar (More or Less): belt sander

This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: - done
Take a picture - pending
Find the manual as PDF needed for all machines - add a link to the InfoBox or comment where you could not find it done
Documentation this page, status: in commissioning pending
Print QR-Code use the wikicrawler pending
Introduction - pending
Security Check Martin: Seems like the repaired one is secure. Please refer to github for further details. pending
Test Martin: The repaired one was tested. A manager should confirm this though. pending
tool's name, owner and approx. value provide to Patrick for inventorization pending
Last step: make it available physically and in the wiki - then delete this template pending


An eccentric sander is very useful for finishing surfaces. The major advantage of this kind of sander is the irregular motion of the sanding pad which greatly reduces unsightly marks on the workpiece.

We have a Festo RO 2 E and a Festo RO 150 E that need to be repaired (see #25) before they can be added to the wood workshop.

Safety

When using an eccentric sander, always take the time to properly clamp down your workpiece, hook up the shop vac and wear safety glasses. Depending on your material, you may also need a dust mask!

Suggested Reading

Consumables

Sanding Discs

Typical sanding disc sizes are 120 or 150 mm. We are not currently keeping them in stock so you should be prepared to bring your own.

If you plan to remove paint, make sure to use special discs that don't clog as easily (usually with a white coating)! A spatula or a plane is usually more appropriate for this kind of work, though.

Festo RO 2 E

ToolInfoBox

Festo RO 2 E

Tool-default.png
Used with: 150 mm sanding discs with holes
Location: CoMaking room (for now)
Access Requirements: after personal introduction
Manual: manuall.de

The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (keine Anlaufsicherung)!



Festo RO 150 E

ToolInfoBox

Festo RO 150 E

Tool-default.png
Used with: 150 mm sanding discs with holes
Location: CoMaking room (for now)
Access Requirements: after repair (see #25) & personal introduction
Manual: nearly identical to Festo RO 2 E (manuall.de)