Dust Extractors: Difference between revisions

From CoMakingSpace Wiki

(→‎Felder AF 14: InfoBox - hopefully only editing the section this time...)
(extraboxes)
Line 53: Line 53:
}}
}}


 
<br clear="all">
== Felder AF 14 ==
== Felder AF 14 ==
{{MachineInfoBox
{{MachineInfoBox
Line 65: Line 65:
|tutors=-
|tutors=-
|used with=[[Jointer-Planer|jointer-planer]]
|used with=[[Jointer-Planer|jointer-planer]]
|extrabox=yes
}}
}}
The Felder AF 14 should be in close proximity to the [[Jointer-Planer|jointer-planer]].
The Felder AF 14 should be in close proximity to the [[Jointer-Planer|jointer-planer]].

Revision as of 18:39, 25 April 2021

Besides the smaller shop vacs, we have two higher volume dust extractor that we might eventually hook up to a small system of pipes around the wood workshop.

BAMATO AB-550

MachineInfoBox

BAMATO AB-550

Bamato.jpg
Synonyms: vacuum extractor, vacuum extraction machine
DE: Absauganlage
Type: [[dust collection]]
Material: wood & similar dust (not sparks!)
Used with: hearing protection, breathing protection
Location: wood workshop
Access Requirements: <ul><li>The part "collection" of the query was not understood.Results might not be as expected.</li> <!--br--><li>The part "]]" of the query was not understood.Results might not be as expected.</li></ul>
Status: [[Has InfoBox Status::in commissioning]]
Manual: in the bag; nearly identical: Einhell TE-VE 550 A
(the BAMATO does not have an automatic power outlet)
Tutors: <ul><li>The part "collection" of the query was not understood.Results might not be as expected.</li> <!--br--><li>The part "]]" of the query was not understood.Results might not be as expected.</li></ul>
Similar (More or Less): shop vacs

[[Has caption::dust collection| ]] [[MachineType::dust collection| ]]


Caution - in its factory state, this machine does NOT have a fine dust filter! If used for tasks like sanding, it may even spread the fine dust more than if you had not used it at all. It is therefore mainly suitable for the extraction of larger chips and does NOT replace a dust mask.

Maintenance

UNPLUG before you do any maintenance

It should easily suck up smaller chips and saw dust from a surface if the pipe opening is placed perpendicular to the surface. If this is not the case you will have to service it. Over time larger chips that are sucked up don´t make it in to the rotor and clog the airway. They can usually be removed by disconnecting the pipe from the rotor and clearing the nest manually. Also the white fabric filter gets clogged over time and should be cleaned to. If the filter inflates like a bouncy castle upon turning it on, it is time to clean it. Wear a dust mask .
Obviously the plastic bag needs to be emptied when full.


This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: done BAMATO AB-550
Take a picture - done
Find the manual as PDF nearly the same as Einhell TE-VE 550 A done
Documentation should contain dangers/precautions, basic facts (adapter sizes, power) and how to empty the bag pending
Print QR-Code use the wikicrawler pending
Introduction not needed -
Security Check Lukas done
Test Lukas done
tool's name, owner and approx. value entered by Lukas done
Last step: make it available physically and in the wiki - then delete this template pending



Felder AF 14

MachineInfoBox

Felder AF 14

Machine-default.png
Used with: jointer-planer
Location: wood wirkshop (close to CNC area)
Access Requirements: Some use of "" in your query was not closed by a matching "".
Manual: felder-gruppe.at (DE)
Tutors: Some use of "" in your query was not closed by a matching "".


The Felder AF 14 should be in close proximity to the jointer-planer.

The system should be hooked up through the automated switch box (switched output) mounted on the metal frame, that should also be connected to the planer (trigger output). Once the planer is started the vacuum system will turn on after 3 seconds and turn off once the planer is off for 8 seconds. Make sure to set the switch on the vacuum motor to '1' (ON) before starting!

This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: - done
Take a picture - pending
Find the manual as PDF felder-gruppe.at (DE) done
Documentation this page, status: in commissioning pending
Print QR-Code use the wikicrawler pending
Introduction - pending
Security Check to be done or witnessed by a manager done
Test to be done or witnessed by a manager done
tool's name, owner and approx. value provide to Patrick for inventorization pending
Last step: make it available physically and in the wiki - then delete this template pending