Disc Grinders: Difference between revisions
(blue text is misleading, put safety before tool table) |
(→Discs: sanding disc holder (currently in the CoMaking room)) |
||
| Line 40: | Line 40: | ||
|125{{x}}1.2 mm | |125{{x}}1.2 mm | ||
|1€/disc | |1€/disc | ||
|- | |||
|sanding disc holder | |||
|[[sanding]] | |||
|''<?>'' | |||
|depends on the [[Sanding Discs|sanding disc]] | |||
|- | |- | ||
|more | |more | ||
Revision as of 10:17, 18 May 2018
| ToolInfoBox Disc Grinder | |
|---|---|
| File:Disc grinder.JPG | |
| Synonyms: | angle grinder; DE: "Flex", Winkelschleifer, Trennschleifer |
| Type: | power tool |
| Material: | depending on disc: metal (except aluminum), stone |
| Used with: | face shield, goggles, hearing protection, gloves |
| Location: | metal workshop |
| Access Requirements: | upon introduction |
| Tutors: | Lukas |
| Similar (More or Less): | rotary tool |
We have a couple of disc grinders in the metal workshop. For small-scale applications, try using a rotary tool before you whip out this beast.
It can be used to cut or grind metal or stone, depending on the disc used. Cutting discs (Trennscheiben) should not be used for grinding and grinding discs (Schruppscheiben) should not be used for cutting as they are primarily reinforced for one of the purposes.
The "King Craft" grinder works with 125 mm discs.
Safety
CAUTION - the "King Craft" grinder has a switch that will stay on until you push it back to the "off" position, so it could surprisingly start when plugged in!
Due to the high amount of sparks generated, it is a good idea to wear a face shield as a second layer over your goggles! In addition, you should put on some gloves and hearing protection before using a disc grinder.
Make sure the disc is securely fastened and spins without an offset before cutting anything!
Do NOT operate a grinder without its semi-circular collar - it will protect you from a lot of the sparks and shrapnel of the disc (if one breaks on you). Stay away from aluminum, it can reportedly clog and overheat the disc up to the point of explosion!
Discs
| tool type | use | properties | suggested donation |
| Trennscheiben | cutting | 125 × 1.2 mm | 1€/disc |
| sanding disc holder | sanding | <?> | depends on the sanding disc |
| more | will | come |
