Compressor

From CoMakingSpace Wiki

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

You can find our air compressor in the metal workshop.

Herkules Pro-Line Flüsterkompressor Siltek 24

MachineInfoBox

Herkules Pro-Line Flüsterkompressor Siltek 24

Herkules Pro-Line Flüsterkompressor Siltek 24.jpeg
Synonyms: DE: Kompressor
Type: Compressor
Material: air
Used with: list of accessories below;
blast cabinet
Location: metal workshop
Access Requirements: Compressor Introduction
Manual: bauhaus.info
Tutors: Lukas
NitramLegov
Pakue
Luzian


We got a silent air compressor for use within our workshop with the following specs:

  • Noise: 59 db
  • Capacity: 24 liters
  • Max pressure: 8 bar
  • Motor Power: 1kW

Pressure Control

This compressor does only have one outlet. On this outlet, it will always deliver the set up pressure, which you can adjust by turning the pressure reduction knob on the top. Turning the knob clockwise will increase pressure, counterclockwise turning increases it!

For an accurate adjustment, first close the reducer all the way and then open it to the desired extent.



Maintenance

Compressors collect ambient humidity over time that condenses on the inside. You should drain excess water from the tank before and after long runs - release the air from the tank first!


Accessories

So far, we have:

  • a simple blow gun
  • tire filler (Reifenfüller) with Michelin fitting ("car valve")
    • CAUTION: the reading seems to be 0.3 bar too low, i.e. if you fill a tire according to the dial you will overfill it by 0.3 bar (comparison with digital gas station compressor
  • 20 m hose drum