CNC Router: Difference between revisions

From CoMakingSpace Wiki

(added InfoBox)
(→‎WorkBee: typo, more appropriate github link)
(45 intermediate revisions by 6 users not shown)
Line 1: Line 1:
A CNC router is a computerized [[woodworking]] machine - basically a [[router]] mounted on a positioning system. While it may also be able to handle other materials depending on the [[bits]] you use, a proper [[CNC Mill|CNC mill]] is more precise for machining parts out of metals and other non-wood materials.
[[File:CNC router.gif|right|400px]]
A CNC router is a computerized [[woodworking]] machine - basically a [[router]] mounted on a positioning system. While it may also be able to handle other materials than wood depending on the [[bits]] you use, a proper [[CNC Mill|CNC mill]] is more precise for machining parts out of metals and other non-wood materials.
 
To use this machine, you need to familiarize yourself with at least two pieces of software:
* a [[CAD]]/[[CAM]] program (e.g. [[Fusion 360]])
** may also be two different programs, one for CAD and one for CAM
* a [[G-Code Senders|G-Code sender]]


There is also an interesting new approach of [https://shapertools.com/ handheld CNC routing] coming out which may remove the size constraints that come with any fixed-frame machine.
There is also an interesting new approach of [https://shapertools.com/ handheld CNC routing] coming out which may remove the size constraints that come with any fixed-frame machine.
== Uses ==
You can [https://www.opendesk.cc/ make furniture] or even [https://wikihouse.cc/ build a house]. For more ideas, check out the [[CNC Milling Ideas]].


== WorkBee ==
== WorkBee ==
{{MachineInfoBox
{{MachineInfoBox
|machine name=Ooznest WorkBee CNC
|machine name=Ooznest WorkBee CNC
|image=
|image=Workbee frame.JPG
|synonyms=DE: CNC-Fräse
|synonyms=DE: CNC-Fräse, Portalfräsmaschine
|type=
|type=
|material=
|material=[[wood]]
|location=[[CNC Room|CNC room]]
|location=[[CNC Room|CNC room]]
|access=
|access=upon [[CNC Router Introduction|introduction]]
|status=under construction (see [https://github.com/comakingspace/do-something/issues/8 issue #8])
|status=operational (please observe for any <br> problems due to recent [https://github.com/comakingspace/do-something/projects/1 modifications])
|firmware=
|firmware=[[grbl]]
|software=
|software=[[LaserWeb]], [[Fusion360]], see [[G-Code Sender]]
|manual=
|manual=[http://ooznest.co.uk/WorkBee-CNC-Full-Kit product page], click "documentation" tab
|tutors=
|tutors=[[User:Pakue|Patrick]]
|used with=[[End Mills|end mills]]
|used with=6 mm, 8 mm, 1/4" or 1/8" [[End Mills|end mills]];<br>''some'' kinds of [[Router Bits|router bits]]
|similar=[[router]], [[CNC Mill|CNC mill]]
|similar=[[router]], [[CNC Mill|CNC mill]]
}}
}}
We have ordered the [https://www.thingiverse.com/thing:2538752 WorkBee CNC], which is based on the Openbuilds OX. It will fill the [[CNC Room]] and also needs a large table construction.


Details on setting it up can be found in [https://github.com/comakingspace/do-something/issues/8 issue #8] - maybe you would like to help?
We built the 1500mm x 1500mm version of the [https://www.thingiverse.com/thing:2538752 WorkBee CNC], which is based on the Openbuilds OX. It can currently cut sheet material of up to 50 mm thickness on a work area of approximately 1250{{x}}1250 mm. The surfaced ''(plangefräste)'' spoilboard area is 1260{{x}}1160 (x{{x}}y) mm.
 
Our plans for further improving it up can be found in [https://github.com/comakingspace/do-something/projects/1 our "WorkBee CNC" github project] - maybe you would like to help?
 
=== Router ===
 
The router mounted to it is a Dewalt D26200 (GB; known outside Europe as [https://www.shapeoko.com/wiki/index.php/DWP611 DWP611]). You need to consider the sizes of its collets (''Spannzangen'') when buying your router bits.
 
* no-load speed: 16000 - 27000 rpm
* max cutter diameter: 30 mm
* available collet diameters:
** 6 mm
** 8 mm
** 1/4 inch (6.35 mm)
** 1/8 inch (3.175 mm)
 
The collets of the DW613, DW620 and DW621 also fit the router and are easier to get in Germany than the original ones.
 
 
=== Electrics ===
 
The spindle and the CNC controller + motors are hooked up to an electrical box on the left wall. You'll find a switch and an outlet for the spindle there. In case of an emergency the whole box can be shut off via one of the two emergency stops (inside the CNC room and on the outside above the access control). Everything except the Raspberry Pi will be turned off in that case.
 
=== Dust Extraction ===
We have added a cyclone dust separator between the [[Shop Vac|shop vac]] and the CNC router itself. Thereby, the bulk of the shavings and dust should be collected in an easily emptied box rather than the shop vac's bag.
 
The part that attaches the dust extraction hose to the router is called a "dust shoe". We are currently using [https://github.com/comakingspace/CommonFiles/tree/master/3DPrintingFiles/WorkbeeCNC this one] designed by [[Patrick]]. The next version should ideally fit the dust extraction hose without an adapter and include a kind of transparent, flexible "skirt" to optimize the airflow.
 
Other interesting designs:
* https://www.thingiverse.com/thing:2802301
 
=== Workflow ===
'''This is just an overview and does NOT replace the [[CNC Router Introduction|personal introduction]]!'''
 
# create the tool paths in a suitable CAM software (e.g. [[Fusion 360]])
# [[CNC Router Workholding|secure your workpiece]] on the machine's bed
# insert the appropriate collet & bit as defined in your tool paths
# turn the positioning motors on, home the machine and define the workpiece origin
# put on [[PPE|personal protection]] and turn the spindle on
# send the tool paths to the router in real time via the serial interface (USB)
## options can be found under "[[G-Code Senders]]"
 
 
<br clear=all>
 
== Tips & Tricks ==
* to avoid tear-out at the edge of a sensitive workpiece, it may be worthwhile to surround it with some sacrificial material (like [[MDF]]) before routing <sup>[https://www.instagram.com/p/BW7hYEjFxP0/]</sup>
 
=== Spoilboard ===
 
Ooznest recommends a 6mm spoiler board, our first one is 20mm thick. It is mounted to the frame using 4 drop-in [[T-Slot Nuts|T-slot nuts]]. Cutting into the boards will make it uneven, from time to time it is neccessary to [https://www.youtube.com/watch?v=Xav1uvCN6yY surface the spoiler board] again.
 
When there is time, we would like to [https://github.com/comakingspace/do-something/issues/51 drill workholding holes into the spoilboard].
 
== Materials ==
(''For more details, see "[[Milling Experiences]]")''
 
CNC routing is most appropriate for non-metal panels/boards. The exact material might dictate your choice of [[endmill]] or [[Router Bit|router bit]]!
 
Cutting certain metals, e.g. millable aluminum, may still be possible with a lot of extra work, but a rigid and liquid-cooled [[CNC Mill|CNC mill]] would be the proper way to go.


== Helpful Links ==
* video tutorials:
** [https://www.youtube.com/channel/UCXagoO_ru-R7ZrK_KgMQm-w/# Ooznest YouTube channel] (pretty new, but specific to our setup
* other spaces with (somewhat) similar machines and good approaches/documentation:
** [https://wiki.attraktor.org/CNC-Fr%C3%A4se-III Attraktor e.V.]
* Feeds and Speeds Calculator
** [https://www.cnccookbook.com/cnc-feed-rate-calculator/?utm_expid=2217679-286.T2DFl_2WR5Ol3H85sYpQhQ.0&utm_referrer=https%3A%2F%2Fwww.google.de%2F cnccookbook 2 calculators]
** [https://fswizard.com/www/ Feed and Speed wizard]
** [https://www.kennametal.com/en/resources/engineering-calculators/miscellaneous/speed-and-feed.html]


[[Category:CNC]]
[[Category:CNC Routing]]
[[Category:Woodworking]]
[[Category:Woodworking]]

Revision as of 08:37, 25 January 2019

CNC router.gif

A CNC router is a computerized woodworking machine - basically a router mounted on a positioning system. While it may also be able to handle other materials than wood depending on the bits you use, a proper CNC mill is more precise for machining parts out of metals and other non-wood materials.

To use this machine, you need to familiarize yourself with at least two pieces of software:

There is also an interesting new approach of handheld CNC routing coming out which may remove the size constraints that come with any fixed-frame machine.

Uses

You can make furniture or even build a house. For more ideas, check out the CNC Milling Ideas.

WorkBee

MachineInfoBox

Ooznest WorkBee CNC

Workbee frame.JPG
Synonyms: DE: CNC-Fräse, Portalfräsmaschine
Material: wood
Used with: 6 mm, 8 mm, 1/4" or 1/8" end mills;
some kinds of router bits
Location: CNC room
Access Requirements: CNC Router IntroductionSome use of "" in your query was not closed by a matching "".
Status: [[Has InfoBox Status::operational (please observe for any
problems due to recent modifications)]]
Firmware: grbl
Software: LaserWeb, Fusion360, see G-Code Sender
Manual: product page, click "documentation" tab
Tutors: NitramLegov
Pakue
Johannes
LuzianSome use of "" in your query was not closed by a matching "".
Similar (More or Less): router, CNC mill


We built the 1500mm x 1500mm version of the WorkBee CNC, which is based on the Openbuilds OX. It can currently cut sheet material of up to 50 mm thickness on a work area of approximately 1250 × 1250 mm. The surfaced (plangefräste) spoilboard area is 1260 × 1160 (x × y) mm.

Our plans for further improving it up can be found in our "WorkBee CNC" github project - maybe you would like to help?

Router

The router mounted to it is a Dewalt D26200 (GB; known outside Europe as DWP611). You need to consider the sizes of its collets (Spannzangen) when buying your router bits.

  • no-load speed: 16000 - 27000 rpm
  • max cutter diameter: 30 mm
  • available collet diameters:
    • 6 mm
    • 8 mm
    • 1/4 inch (6.35 mm)
    • 1/8 inch (3.175 mm)

The collets of the DW613, DW620 and DW621 also fit the router and are easier to get in Germany than the original ones.


Electrics

The spindle and the CNC controller + motors are hooked up to an electrical box on the left wall. You'll find a switch and an outlet for the spindle there. In case of an emergency the whole box can be shut off via one of the two emergency stops (inside the CNC room and on the outside above the access control). Everything except the Raspberry Pi will be turned off in that case.

Dust Extraction

We have added a cyclone dust separator between the shop vac and the CNC router itself. Thereby, the bulk of the shavings and dust should be collected in an easily emptied box rather than the shop vac's bag.

The part that attaches the dust extraction hose to the router is called a "dust shoe". We are currently using this one designed by Patrick. The next version should ideally fit the dust extraction hose without an adapter and include a kind of transparent, flexible "skirt" to optimize the airflow.

Other interesting designs:

Workflow

This is just an overview and does NOT replace the personal introduction!

  1. create the tool paths in a suitable CAM software (e.g. Fusion 360)
  2. secure your workpiece on the machine's bed
  3. insert the appropriate collet & bit as defined in your tool paths
  4. turn the positioning motors on, home the machine and define the workpiece origin
  5. put on personal protection and turn the spindle on
  6. send the tool paths to the router in real time via the serial interface (USB)
    1. options can be found under "G-Code Senders"



Tips & Tricks

  • to avoid tear-out at the edge of a sensitive workpiece, it may be worthwhile to surround it with some sacrificial material (like MDF) before routing [1]

Spoilboard

Ooznest recommends a 6mm spoiler board, our first one is 20mm thick. It is mounted to the frame using 4 drop-in T-slot nuts. Cutting into the boards will make it uneven, from time to time it is neccessary to surface the spoiler board again.

When there is time, we would like to drill workholding holes into the spoilboard.

Materials

(For more details, see "Milling Experiences")

CNC routing is most appropriate for non-metal panels/boards. The exact material might dictate your choice of endmill or router bit!

Cutting certain metals, e.g. millable aluminum, may still be possible with a lot of extra work, but a rigid and liquid-cooled CNC mill would be the proper way to go.

Helpful Links