CMI C-S-BS 250

From CoMakingSpace Wiki

Revision as of 08:15, 23 October 2021 by Lukas (talk | contribs) (template parameter "german" instead of direct SMW tagging)


CMI C-S-BS 250

MachineInfoBox

CMI C-S-BS 250

CMI C S BS 250.JPG
Synonyms: CMI C-BAN-250 (probably the same); DE: "Metall-Bandsäge"
Type: [[power saw]]
Material: metal (depending on blade);
wood (currently not intended)
Used with: 1400 mm bandsaw blades
Location: metal workshop
Access Requirements:
Manual: nearly identical: Westfalia RBS 205
Tutors:
Similar (More or Less): scroll saw

[[Has caption::power saw| ]] [[MachineType::power saw| ]]


This small bandsaw does not have much power, but is nice for learning the basics and in case you just need to make some curvy or cold cuts through soft metals.

The blade guides are very simple, just consisting of two pins for the sides and a bearing for the back of the blade. Ignaz is going to turn an eccentric bearing mount to increase their lifetime (by default, the blade runs too close to the center of the bearing).

Please refer to the proper blade-guide distances explained in our bandsaw introduction, NOT the ones from the manual!

Specs:

  • blade length - 1400 mm
  • max. blade width - ???
  • max. blade thickness - 0.36 mm [1]
  • max. cutting depth - 80 mm