Belt and Disc Sander

From CoMakingSpace Wiki

Revision as of 19:55, 25 October 2021 by Andreas (talk | contribs)

This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Holzmann BT 203_914

This machine will sit in the metal workshop, next the the grinding stones on a wooden box containing the manual and accessories after commissioning.

It is a combined disc and belt sander with a 200mm rough sanding disc and a 914x100mm belt sander. Both are always simultaneously driven by the 550W motor. Belt speed is 9,5m/s and disc speed is 2850 min-1.

This type of machine is helpful for all sanding tasks that require a fixed angle. Both sander sides have adjustable sanding tables and a slot for a miter gauge to guide your workpiece in a defined agle against the sanding disc or belt.


MachineInfoBox

Holzmann BT 203_914

Beltdiscsander.jpg
Used with: 914x100mm sanding belts
200mm sanding discs (glued)
Location: Metal Workshop
Access Requirements: Stationary Sander IntroductionSome use of "" in your query was not closed by a matching "".
Manual: in wooden box below grinder
Tutors: Lukas
Pakue
Johannes
Luzian
Utis
Sebastian
JakobSome use of "" in your query was not closed by a matching "".


Features

As by the producer, the machine has the following features

  • pivoting aluminium table for disc and belt sander (up to 45°)
  • sanding belt unit tiltable from 0-90° horizontally and vertically
  • mitre fence for precise angle sanding
  • suction device
  • fast and easy belt change due to quick clamping device
  • suitable for longitudinal and front edges, round and mitre sanding and plane faces

The following is included in the delivery: 1 sanding belt, 1 sanding disc, mitre gauge, 2x ALU-table.

In the original version, the sanding disk is glued. After modification, it is possible to install velcro-backed abrrasive discs.

Refer to the manual to learn more about how you can change parameters or table-angles.

Commissioning

This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: - done
Take a picture - Done
Find the manual as PDF no pdf found in wooden box below sander
Documentation this page, status: in commissioning pending
Print QR-Code use the wikicrawler pending
Introduction Belt and Disc Sander Introduction pending
Security Check to be done or witnessed by a manager pending
Test to be done or witnessed by a manager pending
tool's name, owner and approx. value provided by Martin Done
Last step: make it available physically and in the wiki - then delete this template pending