Belt and Disc Sander: Difference between revisions

From CoMakingSpace Wiki

No edit summary
No edit summary
Line 1: Line 1:
=== Holzmann BT 203_914 ===
=== Holzmann BT 203_914 ===
This machine will sit in the metal workshop, next the the grinding stones on a wooden box containing the manual and assessories after commissioning.
It is a combined disc and belt sander with a 200mm rough sanding disc and a 914x100mm belt sander. Both are always simultaneously driven by the 550W motor. Belt speed is 9,5m/s and disc speed is 2850 min-1.
This type of machine is helpful for all sanding tasks that require a fixed angle. Both sander sides have adjustable sanding tables and a slot for a miter gauge to guide your workpiece in a defined agle against the sanding disc or belt.


{{MachineInfoBox
{{MachineInfoBox

Revision as of 12:15, 23 October 2021

Holzmann BT 203_914

This machine will sit in the metal workshop, next the the grinding stones on a wooden box containing the manual and assessories after commissioning.

It is a combined disc and belt sander with a 200mm rough sanding disc and a 914x100mm belt sander. Both are always simultaneously driven by the 550W motor. Belt speed is 9,5m/s and disc speed is 2850 min-1.

This type of machine is helpful for all sanding tasks that require a fixed angle. Both sander sides have adjustable sanding tables and a slot for a miter gauge to guide your workpiece in a defined agle against the sanding disc or belt.


MachineInfoBox

Holzmann BT 203_914

Machine-default.png
Used with: 914x100mm sanding belts
Location: Metal Workshop
Access Requirements: Stationary Sander Introduction
Manual: in wooden box below grinder
Tutors: Lukas
Pakue
Johannes
Luzian
Utis
Sebastian
Jakob


This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: - done
Take a picture - pending
Find the manual as PDF no pdf found in wooden box below sander
Documentation this page, status: in commissioning pending
Print QR-Code use the wikicrawler pending
Introduction Belt and Disc Sander Introduction pending
Security Check to be done or witnessed by a manager pending
Test to be done or witnessed by a manager pending
tool's name, owner and approx. value provide to Patrick for inventorization pending
Last step: make it available physically and in the wiki - then delete this template pending