Belt Sander

From CoMakingSpace Wiki

Revision as of 16:37, 19 December 2019 by Lukas (talk | contribs) (removed Umzug note)

MachineInfoBox

AlphaTools BBS 720

AlphaTools BBS 720.jpg
Synonyms: DE: Bandschleifer, Bandschleifgerät,
Handbandschleifmaschine
Type: [[handheld sander]]
Material: wood, metals
Used with: sanding belts
Location: wood workshop
Access Requirements: Handheld Sander Introduction
Manual: identical Einhell tool
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Sebastian
Jakob
Similar (More or Less): eccentric sander

[[Has caption::handheld sander| ]] [[MachineType::handheld sander| ]]


This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: AlphaTools BBS 720 done
Take a picture - done
Find the manual as PDF identical Einhell tool done
Documentation TODO: explain/illustrate belt direction pending
Print QR-Code use the wikicrawler done
Introduction Handheld Sander Introduction done
Security Check Lukas done
Test Lukas/LokowandtG; shop vac adapter would be nice but the bag is fine for outside use done
tool's name, owner and approx. value provide to Patrick for inventorization pending
Last step: make it available physically and in the wiki - then delete this template pending


This tool will be a great addition for woodworking as well as other projects as it can also be used to grind metals. There are even advantages over stone-based grinders such as the larger surface and no chance of exploding stones. Belts may rip and go flying though, especially if they are installed in the wrong direction.

Belts

This sander requires 76 × 457 mm belts. We only have a few belts, so be prepared bring your own!

If the belt often slips under pressure, it may have become stiff - this may be fixed by "massaging" it a bit in tight bends or replacing it with a new one.

TODO: explain/illustrate belt direction

Stand

although the belt sander can be clamped very carefully in a woodworking vise, we should really make a proper stand for such stationary uses!

The Spanish Maker Román Palma shared instructions for a nifty three-position stand in Make: magazine, see the article and video here!

With such a stand we could use the belt sander as a simple substitute for a planer (DE: Hobelmaschine) or bench grinder.