Belt Sander: Difference between revisions

From CoMakingSpace Wiki

(aka Handbandschleifmaschine, updated commissioning progress)
m (Category:Sanders)
Line 54: Line 54:


[[Category:Power Tools]]
[[Category:Power Tools]]
[[Category:Sanders]]
[[Category:Sanding]]
[[Category:Sanding]]
[[Category:Woodworking]]
[[Category:Woodworking]]

Revision as of 18:19, 9 October 2018

ToolInfoBox

AlphaTools BBS 720

Tool-default.png
Synonyms: DE: Bandschleifer, Bandschleifgerät,
Handbandschleifmaschine
Type: handheld sander
Material: wood, metals
Used with: sanding belts
Location: wood workshop
Access Requirements: after commissioning:
upon personal introduction
Tutors: Lukas
Manual: identical Einhell tool
Similar (More or Less): eccentric sander

This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: AlphaTools BBS 720 done
Take a picture - pending
Find the manual as PDF identical Einhell tool done
Documentation this page, status: in commissioning pending
Print QR-Code use the wikicrawler pending
Introduction started here: "Handheld Sander Introduction" pending
Security Check Lukas done
Test Lukas/LokowandtG; shop vac adapter would be nice but the bag is fine for outside use done
tool's name, owner and approx. value provide to Patrick for inventorization pending
Last step: make it available physically and in the wiki - then delete this template pending


This tool will be a great addition for woodworking as well as other projects as it can also be used to grind metals. There are even advantages over stone-based grinders such as the larger surface and no chance of exploding stones. Belts may rip and go flying though, especially if they are installed in the wrong direction.

Belts

This sander requires 76 × 457 mm belts. We only have a few belts, so be prepared bring your own!

If the belt often slips under pressure, it may have become stiff - this may be fixed by "massaging" it a bit in tight bends or replacing it with a new one.

TODO: explain/illustrate belt direction

Stand

The Spanish Maker Román Palma shared instructions for a nifty three-position stand in Make: magazine, see the article and video here!

With such a stand we could use the belt sander as a simple substitute for a planer (DE: Hobelmaschine) or bench grinder.