Vertical Bandsaws
| MachineInfoBox Bandsaws | |
|---|---|
| |
| Synonyms: | DE: Bandsägen (Sg. Bandsäge) |
| Material: | depends on the blade (see individual machines) |
| Access Requirements: | Vertical Bandsaw Introduction |
| Tutors: | Lukas Jakob Loewenstein |
| Similar (More or Less): | scroll saw |
We got two bandsaws from our awesome members!
There is a larger bandsaw for wood and a smaller one for metal.
Interesting Resources
- "Arbeiten mit Bandsägen" slideshow (DE)
- Sicheres Arbeiten an Tischbandsägemaschinen (DE)
- Arbeitsschutz kompakt Nr. 039 "Arbeiten an Bandsägemaschinen" (DE)
- Arbeitsschutz kompakt Nr. 039 "Arbeiten an Metallbandsägen" (DE)
- Bandsäge richtig einstellen (DE)
WoodSter 2 BS 412
| MachineInfoBox WoodSter 2 BS 412 | |
|---|---|
| |
| Type: | Vertical Bandsaw |
| Material: | wood |
| Used with: | 1870-1880 mm bandsaw blades |
| Location: | office |
| Access Requirements: | Vertical Bandsaw Introduction |
| Manual: | identical(?): Inca EURO 260 (inca-maschinen.ch) |
| Tutors: | Lukas Jakob Loewenstein |
New medium-size bandsaw coming soon
We were given a "WoodSter 2 BS 412" which now needs to be commissioned. It is very similar, if not identical, to an Inca EURO 260. [1]
Specs
- cutting height: 155 mm
- throat clearance (Ausladung): 260 mm
- wheel diameter: 280 mm
- blade (DE and EN manual sections differ?!)
- blade length: 1870-1880 mm (DE)/1850 mm (EN)
- blade width: 3-15 mm (DE)/3-18 mm (EN)
- blade thickness: 0.4-0.65 mm (DE)/0.5 mm (EN)
- motor speed: 1000 rpm
- table tilt: max. 45°
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | pending |
| Find the manual as PDF | very similar - exact brand not found | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | - | pending |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
Metabo BS 1638 W
| MachineInfoBox Metabo BS 1638 W | |
|---|---|
| |
| Type: | Vertical Bandsaw |
| Material: | wood |
| Used with: | 2225 mm bandsaw blades; bandsaw fence, bandsaw sled |
| Location: | wood workshop |
| Access Requirements: | Vertical Bandsaw Introduction |
| Manual: | identical(?): Metabo BAS 380 (libble.de) |
| Tutors: | Lukas Jakob Loewenstein |
The Metabo BS 1638 W (you can probably drop the "W" when searching for accessories) is a three-wheeled bandsaw for 2225 mm bandsaw blades.
DO NOT use the integrated disc sander! A proper disc sander needs a table against kickback, and it's generally a bad idea to use a sharp blade as a mere driving belt...
The saw was missing a parallel fence but Manu built one that should be fine for most uses, please help us out if you would like to improve and document it further!
Specifications
more details in the manual!
- cutting height: 160 mm
- throat clearance (Ausladung): 380 mm
- max. workpiece weight: 15 kg
Caution with Curves
Besides the radius, which is determined by the blade width, you may run into problems with tight curves going in the wrong direction. Please make sure the wood is pushed towards the side with the support bearing (left) during difficult curves or there can be a very unpleasant derailing!
"Difficult" means any combination of...
- hard wood
- thick workpiece
- tight curve
CMI C-S-BS 250
| MachineInfoBox CMI C-S-BS 250 | |
|---|---|
| |
| Synonyms: | CMI C-BAN-250 (probably the same); DE: "Metall-Bandsäge" |
| Type: | Vertical Bandsaw |
| Material: | metal (depending on blade); wood (currently not intended) |
| Used with: | 1400 mm bandsaw blades |
| Location: | Metal Workbench |
| Access Requirements: | Vertical Bandsaw Introduction |
| Manual: | nearly identical: Westfalia RBS 205 |
| Tutors: | Lukas Jakob Loewenstein |
| Similar (More or Less): | scroll saw |
This small bandsaw does not have much power, but is nice for learning the basics and in case you just need to make some curvy or cold cuts through soft metals.
The blade guides are very simple, just consisting of two pins for the sides and a bearing for the back of the blade. Ignaz is going to turn an eccentric bearing mount to increase their lifetime (by default, the blade runs too close to the center of the bearing).
Please refer to the proper blade-guide distances explained in our bandsaw introduction, NOT the ones from the manual!
Specs:
- blade length - 1400 mm
- max. blade width - ???
- max. blade thickness - 0.36 mm [2]
- max. cutting depth - 80 mm
