Bandsaw Fence

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

ToolInfoBox Simple Straight Fence

Synonyms:	parallel fence; DE: Bandsägen-Parallelanschlag
Type:	jig
Used with:	Metabo BS 1638 W
Location:	wood workshop (near bandsaw)
Access Requirements:	read this page
Tutors:	Lukas
Similar (More or Less):	bandsaw sled

This bandsaw fence (made by Manu) looks similar to a parallel (or "rip") fence on the table saw. It is attached to the bandsaw's table with two small clamps.

However, you may need to use it at a slight angle depending on the sawband! If the blade drifts, a parallel fence will only cause you trouble... Determine the correct angle by freehanding a cut along a straight line for a few cm, then set the fence according to your workpiece!

Further Ideas

Next, we could make a magnet-held "point fence" like Andrew Klein's really fancy one with integrated bearing "feather board"!