Bandsaw Blades: Difference between revisions

From CoMakingSpace Wiki

(added the two 1400 mm blades we have)
("Zahnweite" as alternative to "Zahnteilung"; further reading)
Line 19: Line 19:
** usually expressed as teeth per inch (TPI) or ''Zähne pro Zoll (ZpZ)''
** usually expressed as teeth per inch (TPI) or ''Zähne pro Zoll (ZpZ)''
** for wood, '''3-5 teeth''' should be in the cut (thicker workpiece: fewer teeth per inch!)<sup> [http://www.pilana.com/de/empfehlungen-fur-die-verwendung-von-holzbandsageblattern]</sup>
** for wood, '''3-5 teeth''' should be in the cut (thicker workpiece: fewer teeth per inch!)<sup> [http://www.pilana.com/de/empfehlungen-fur-die-verwendung-von-holzbandsageblattern]</sup>
** alternative notation: ''Zahnweite'', expressed as mm between teeth (e.g. "Z5" = 5 mm from tip to tip)
* width
* width
** determines the minimum radius you can cut (the narrower the blade, the smaller the achievable curves)
** determines the minimum radius you can cut (the narrower the blade, the smaller the achievable curves)
Line 41: Line 42:
|-
|-
! scope="col"| Tooth Pitch ''(Zahnteilung)''
! scope="col"| Tooth Pitch ''(Zahnteilung)''
! scope="col"| ''Zahnweite''
! scope="col"| Width <!-- currently without teeth - correct? -->
! scope="col"| Width <!-- currently without teeth - correct? -->
! scope="col"| Kerf
! scope="col"| Kerf
Line 49: Line 51:
|-
|-
|6 TPI
|6 TPI
|Z4
|13 mm
|13 mm
|
|
Line 57: Line 60:
|-
|-
|6 TPI
|6 TPI
|Z4
|8 mm
|8 mm
|
|
Line 65: Line 69:
|-
|-
|4 TPI
|4 TPI
|Z6+ ''(?)''
|10 mm
|10 mm
|
|
Line 73: Line 78:
|-
|-
|''More''
|''More''
|''needs''
|''to''
|''to''
|''be''
|''be''
Line 111: Line 117:
|}
|}


== Further Reading ==
* [https://www.holz-metall.info/shop1/artikel9438.htm ''"Grundlagen: Bandsägeblätter die richtige Verwendung" (DE)''] by Maschinenhandel Meyer (shop)


[[Category:Metalworking]]
[[Category:Metalworking]]
[[Category:Saws]]
[[Category:Saws]]
[[Category:Woodworking]]
[[Category:Woodworking]]

Revision as of 16:15, 22 May 2019

ToolInfoBox

Bandsaw Blades

Tool-default.png
Synonyms: band saw blades, saw bands, band blades;
DE: Bandsägeblätter, Sägebänder
Material: various (see list)
Used with: bandsaws
Location: wood workshop
(currently under the chop saw station - not ideal
Access Requirements: upon personal introduction
Tutors: Lukas
Similar (More or Less): Circular Saw Blades

A bandsaw's capabilities heavily depend on which blade you choose. This page should let you see what we have in the Space and help you select the proper blade for each project.

Parameters to consider for each use:

  • tooth pitch (Zahnteilung): spacing of teeth
    • usually expressed as teeth per inch (TPI) or Zähne pro Zoll (ZpZ)
    • for wood, 3-5 teeth should be in the cut (thicker workpiece: fewer teeth per inch!) [1]
    • alternative notation: Zahnweite, expressed as mm between teeth (e.g. "Z5" = 5 mm from tip to tip)
  • width
    • determines the minimum radius you can cut (the narrower the blade, the smaller the achievable curves)
  • kerf (Schnittbreite): a bit higher than the blade's back thickness because of the teeth's set (Schränkung)
  • tooth shape
    • greatly influences which materials that can be cut
    • carbide tipped blades with a longer lifespan are become more widespread, but are still very expensive [citation needed]

...and to consider when buying blades:

  • length: found in the manual
  • thickness: should usually not be more than 1 ‰ of the guide wheel diameter or the blade might break [2]
    • different for three-wheel saws?

Further Reading


2225 mm Blades

These blades are compatible with our Metabo BS 1638 W. Here's what we have:

Tooth Pitch (Zahnteilung) Zahnweite Width Kerf Min. Radius [3] Tooth Shape Materials Comments
6 TPI Z4 13 mm approx. 100 mm hook wood, acrylic glass
6 TPI Z4 8 mm hook wood, acrylic glass
4 TPI Z6+ (?) 10 mm approx. 50 mm hook wood Use with caution - has a bend to the left and needs sharpening!
More needs to be documented! Any help welcome :-)

1400 mm Blades

These blades are compatible with our CMI C-S-BS 250. Here's what we have so far:

Tooth Pitch (Zahnteilung) Width Kerf Min. Radius Tooth Shape Materials Comments
14 TPI 6 mm soft non-ferrous metals (e.g. aluminum, copper, bronze)
6 TPI 6 mm hook wood may not cut too well - the set (Schränkung) of the teeth seems to have suffered

Further Reading