Uploads by Lukas
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 19:29, 2 January 2018 | Roubo workbench 1-17.JPG (file) |  |
470 KB | diagonal stretchers were added to our {{Roubo-1}} to make it much more stable | 1 |
| 19:27, 2 January 2018 | Roubo workbench 1-16.JPG (file) |  |
489 KB | our {{Roubo-1}} finally standing on its own legs - time to plane the top some more! | 1 |
| 19:21, 2 January 2018 | Roubo workbench 1-15.JPG (file) |  |
520 KB | now it starts to look like something: all legs and the horizontal stretchers attached to our {{Roubo-1}} | 1 |
| 19:13, 2 January 2018 | Roubo workbench 1-14.JPG (file) |  |
382 KB | test fitting one of our {{Roubo-1}}'s leg joints: the tenons of the leg (on the left) were covered in pencil so that the marks in the mortises show where the pieces currently get stuck and need some more work | 1 |
| 19:10, 2 January 2018 | Roubo workbench 1-13.JPG (file) |  |
358 KB | chiseling part of a leg joint into our {{Roubo-1}} | 1 |
| 18:58, 2 January 2018 | Roubo workbench 1-12.JPG (file) |  |
357 KB | rough work for a tenon done by drilling with Forstner bits - now the chiseling may begin! | 1 |
| 18:55, 2 January 2018 | Roubo workbench 1-11.JPG (file) |  |
313 KB | Forstner bits are good for quick material removal prior to chiseling | 1 |
| 18:52, 2 January 2018 | Roubo workbench 1-10.JPG (file) |  |
352 KB | transferring the outlines of a leg joint's tenons in order to cut the corresponding mortises into the top of our {{Roubo-1}} | 1 |
| 18:49, 2 January 2018 | Roubo workbench 1-09.JPG (file) |  |
359 KB | finished leg for our {{Roubo-1}} | 1 |
| 18:46, 2 January 2018 | Roubo workbench 1-08.JPG (file) |  |
356 KB | Once you have a benchtop, you can already use it! Legs are overrated ;-) Category:Workbenhes | 1 |
| 18:43, 2 January 2018 | Roubo workbench 1-07.JPG (file) |  |
338 KB | chiseling a piece out of a leg joint on our Roubo-1 | 1 |
| 18:38, 2 January 2018 | Roubo workbench 1-06.JPG (file) |  |
378 KB | preparing a leg joint for our {{Roubo-1}} with a Ryoba | 1 |
| 18:30, 2 January 2018 | Roubo workbench 1-05.JPG (file) |  |
364 KB | {{Roubo-1}} glue-up, part two: lacking larger F-clamps, clamping pressure had to be provided by some cargo straps (paint buckets as weights and clamps on some edges should minimize bending) | 1 |
| 18:19, 2 January 2018 | Roubo workbench 1-04.JPG (file) |  |
377 KB | gluing up the top of our {{Roubo-1}} - the planks could not be jointed beforehand so three threaded rods were added as reinforcements | 1 |
| 18:15, 2 January 2018 | Roubo workbench 1-03.JPG (file) |  |
398 KB | simple jig for drilling horizontal holes into the planks that are going to make up the top of our {{Roubo-1}} | 1 |
| 18:12, 2 January 2018 | Roubo workbench 1-02.JPG (file) |  |
368 KB | planks for our {{Roubo-1}}'s top laid out in their optimal arrangement for the first rough planing | 1 |
| 18:06, 2 January 2018 | Roubo workbench 1-01.JPG (file) |  |
286 KB | Materials for our {{Roubo-1}}: ten 2000{{x}}80{{x}}60 mm and two 2000{{x}}100{{x}}80 mm spruce planks. | 1 |
| 10:24, 31 December 2017 | Very early woodshop.JPG (file) |  |
260 KB | our wood workshop was used for all kinds of work (and storage) before we could build better options - so it never looked very tidy... | 1 |
| 10:20, 31 December 2017 | Kitchen installation.JPG (file) |  |
300 KB | our kitchen, ready for the final installation steps | 1 |
| 10:17, 31 December 2017 | Removing old sink.JPG (file) |  |
367 KB | a while after we removed an old sink, a bit of water still thought it would be funny to come splashing out of the wall... | 1 |
| 10:12, 31 December 2017 | Ceiling work.JPG (file) |  |
302 KB | sometimes we need to get onto a ladder, e.g. to mount our projector or some extra outlets | 1 |
| 10:04, 31 December 2017 | E.Room after painting.JPG (file) |  |
323 KB | freshly painted electronics room | 1 |
| 17:09, 29 December 2017 | Wall mounting panels.jpg (file) |  |
222 KB | early on, we installed some large plywood or scrap wood panels on our walls for convenient mounting options (here in the CoMaking room) | 1 |
| 17:00, 29 December 2017 | Large sheet cutting.JPG (file) |  |
384 KB | Ed and Lukas preparing a large plywood sheet for the construction of our very first lockers | 1 |
| 10:39, 29 December 2017 | First tools 2.JPG (file) |  |
399 KB | another carload of tools is being moved into our new Space in September 2017 | 1 |
| 10:38, 29 December 2017 | First tools 1.JPG (file) |  |
360 KB | the first carload of tools, just arrived on moving day in September 2017 | 1 |
| 10:12, 28 December 2017 | Dremel 4000 with bits.JPG (file) |  |
322 KB | "Dremel 4000" rotary tool and a box of rotary tool bits | 1 |
| 18:00, 27 December 2017 | Drilling table.JPG (file) |  |
404 KB | drilling table in our wood workshop as of 2017-12-21 | 1 |
| 16:53, 27 December 2017 | Güde Drechselbank uninstalled.JPG (file) |  |
426 KB | "Güde 1000" wood lathe just after arrival | 1 |
| 12:46, 26 December 2017 | Elu BM 11 E.jpg (file) |  |
105 KB | "Elu BM 11 E" corded drill | 1 |
| 10:19, 26 December 2017 | Drills on the wall.JPG (file) |  |
395 KB | An impact drill (top left), a rotary hammer (bottom left) and two "normal" electric drills (right) on the wall by our drilling table. | 1 |
| 03:24, 13 December 2017 | Key files.jpg (file) |  |
297 KB | six key files on a [https://www.thingiverse.com/thing:801756 3D printed rack] | 1 |
| 02:40, 13 December 2017 | Lathe restoration.JPG (file) |  |
340 KB | our newly arrived Myford ML7 metalworking lathe on the repair table in late 2017 | 1 |
| 20:02, 11 December 2017 | Pins,pins,pins.JPG (file) |  |
633 KB | picture of a CPU (I think...) | 1 |
| 18:09, 11 December 2017 | Drill repair.JPG (file) |  |
394 KB | Patrick fixing a broken hammer drill with a wiring diagram from the internet | 1 |
| 19:15, 10 December 2017 | Einhell router.JPG (file) |  |
378 KB | a router made by Einhell (not sure about the model no.) | 1 |
| 20:24, 8 December 2017 | Cutting corners.JPG (file) |  |
497 KB | table saw with freshly cut corner clamping jigs | 1 |
| 20:09, 8 December 2017 | Herkules KSZ 2100.JPG (file) |  |
369 KB | small entry level chop saw | 1 |
| 19:44, 8 December 2017 | Herkules BHK 1600LE.JPG (file) |  |
623 KB | entry level circular saw | 1 |
| 19:33, 8 December 2017 | Crosscut saw in action.JPG (file) |  |
413 KB | using a crosscut saw to build a shelf for the office | 1 |
| 17:36, 28 November 2017 | Vise family.jpg (file) |  |
743 KB | a couple of bench vises and a woodworking vise before they found their home on various workbenches (tweeted by @comakingspace on 2017-11-05 - [https://twitter.com/comakingspace/status/927154888777388032 link]) | 1 |
| 00:36, 15 November 2017 | Ryoba.JPG (file) |  |
476 KB | a Japanese "Ryoba" saw | 1 |
| 23:55, 14 November 2017 | Clamping corners.JPG (file) |  |
464 KB | two corner clamping jigs in use during a locker build | 1 |
| 23:41, 14 November 2017 | Simple corner clamping jigs.JPG (file) |  |
386 KB | simple corner clamping jigs made by cutting square boards in half and drilling two holes into each piece with a 35 mm Forstner bit | 1 |
| 23:31, 14 November 2017 | Jointer plane.jpg (file) |  |
871 KB | a jointer plane being used to flatten a Roubo workbench | 1 |
| 23:22, 14 November 2017 | Holdfast and Ryoba.JPG (file) |  |
383 KB | Sawing a piece of plywood with a Ryoba - a holdfast makes sure nothing moves! | 1 |
| 23:18, 14 November 2017 | Spade drill bits.JPG (file) |  |
299 KB | a couple of spade bits | 1 |
| 22:43, 14 November 2017 | Hand tools and shavings.jpg (file) |  |
326 KB | some hand tools on top of a Roubo workbench along with a bunch of plane shavings | 1 |
| 09:49, 13 November 2017 | UniCoFil rainbow.JPG (file) |  |
212 KB | a spool of "rainbow" PLA filament from UniCoFil | 1 |
| 18:43, 11 November 2017 | Wood workshop.JPG (file) |  |
497 KB | Our wood workshop in its early days - storage projects are just starting and our first Roubo workbench is still in progress. | 1 |
