Uploads by Lukas
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 18:27, 11 November 2017 | Forstner-shavings.JPG (file) |  |
373 KB | Forstner bits are not designed to transport wood shavings very well, so you may want to clean the hole now and then... | 1 |
| 13:30, 31 October 2017 | Surform plane.JPG (file) |  |
477 KB | Using a surform plane on a locker door made from plywood. The left hand would of course guide the front of the tool when not busy with a camera ;-) | 1 |
| 13:21, 31 October 2017 | Step drill bit vs pipe.JPG (file) |  |
249 KB | Drilling a hole for a blind rivet into aluminum and steel pipes for our coat rack, using a step drill bit | 1 |
| 16:08, 5 October 2017 | Roubo detailed.PNG (file) |  |
497 KB | Relatively detailed sketch of a "Roubo workbench" created in SketchUp. Imported (and modified) models: "Anant Record 53 Vise Simplified (2)" by SchreiberBike and "Holdfast" by Chris, big thanks to the artists! | 1 |
| 10:57, 4 October 2017 | Roubo sketch.PNG (file) |  |
43 KB | early SketchUp draft of a basic "Roubo workbench" | 1 |
| 08:24, 28 September 2017 | Horizontal drill jig.jpeg (file) |  |
513 KB | Some jigs can be hacked together in a few minutes, such as this fixture for horizontal drilling that consists of scrap wood and some clamps. | 1 |
| 11:56, 20 September 2017 | Vertical approach.PNG (file) |  |
38 KB | Sketch for lockers with one shared vertical frame per six locker unit (doors omitted for simplicity) - designed in SketchUp. | 1 |
| 11:44, 20 September 2017 | Horizontal approach.PNG (file) |  |
30 KB | Sketch for lockers which are made up of two horizontal boxes per six locker unit (doors omitted for simplicity) Designed in SketchUp. | 1 |
| 17:05, 19 September 2017 | Sketching lockers.PNG (file) |  |
69 KB | drafting the first locker prototype in SketchUp | 1 |
| 15:34, 11 September 2017 | Wired 'battery' pack.JPG (file) |  |
324 KB | Bosch PSR 960 compatible power supply adapter based on an old NiCd battery pack (see Project:Semi-Cordless Drill for details) | 1 |
| 19:54, 6 September 2017 | Metal parts.JPG (file) |  |
783 KB | == Summary == Base for a {{mpi}} of different metal parts. Interactive version found at Category:Metal Parts. All photos are original work; background removed in GIMP. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:16, 6 September 2017 | Spalted wood disc.JPG (file) |  |
397 KB | section of a log showing some spalting | 1 |
| 09:13, 6 September 2017 | Lexmark X1270.JPG (file) |  |
305 KB | Lexmark X1270, a donated inkjet printer in our starting phase | 1 |
| 16:08, 5 September 2017 | Vernier Caliper.JPG (file) |  |
1.25 MB | a Vernier caliper sticking out of its protective leather sheath Photo by Janik M. Dietz | 1 |
| 16:07, 5 September 2017 | MarkSolid wiped off.jpg (file) |  |
301 KB | a piece of aluminum with lasting marks left by heat-fused laser marking spray Photo by Janik M. Dietz | 1 |
| 16:05, 5 September 2017 | MarkSolid coated.JPG (file) |  |
269 KB | scaled down | 2 |
| 16:05, 5 September 2017 | MarkSolid engraved.jpg (file) |  |
282 KB | scaled down | 2 |
| 15:14, 5 September 2017 | Fill-in paint.jpg (file) |  |
55 KB | two sticks of fill-in paint for engravings | 1 |
| 15:13, 5 September 2017 | Fill-in paint result.jpg (file) |  |
49 KB | engraving in acrylic glass accentuated with fill-in paint | 1 |
| 15:12, 5 September 2017 | Applying fill-in paint 5.jpg (file) |  |
51 KB | see Material:Fill-In Paint for details | 1 |
| 15:12, 5 September 2017 | Applying fill-in paint 4.jpg (file) |  |
38 KB | see Material:Fill-In Paint for details | 1 |
| 15:12, 5 September 2017 | Applying fill-in paint 3.jpg (file) |  |
51 KB | see Material:Fill-In Paint for details | 1 |
| 15:12, 5 September 2017 | Applying fill-in paint 2.jpg (file) |  |
52 KB | see Material:Fill-In Paint for details | 1 |
| 15:09, 5 September 2017 | Applying fill-in paint 1.jpg (file) |  |
57 KB | see Material:Fill-In Paint for details! | 1 |
| 15:08, 5 September 2017 | Engraved transparent acrylics.jpg (file) |  |
44 KB | engraved piece of acrylic glass | 1 |
| 11:06, 5 September 2017 | Location-icon.svg (file) |  |
6 KB | source: [https://openclipart.org/detail/177208/map-location] | 1 |
| 11:04, 5 September 2017 | Letter-icon.png (file) |  |
11 KB | Main page icon for the '''[https://lists.schokokeks.org/mailman/listinfo.cgi/newsletter Newsletter]''' == License == Icon made by [http://www.flaticon.com/authors/madebyoliver Madebyoliver] from [http://www.flaticon.com Flaticon] is licensed by [htt... | 1 |
| 11:00, 5 September 2017 | Ingot iron.png (file) |  |
8 KB | == Summary == icon designed by [http://chrisl21.deviantart.com/ ChrisL21] == License == [http://creativecommons.org/about/licenses/ Creative Commons Attribution-NonCommercial-No Derivate 3.0] | 1 |
| 10:40, 5 September 2017 | Shopping-icon.png (file) |  |
8 KB | Icon made by [http://www.freepik.com/ Freepik] from [http://www.flaticon.com/ www.flaticon.com] | 1 |
| 09:18, 5 September 2017 | Pouring silicone.JPG (file) |  |
230 KB | == Summary == Molding silicone being poured onto 3D printed positives glued to the bottom of a makeshift paper box == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:10, 5 September 2017 | Apple wood discs.JPG (file) |  |
183 KB | == Summary == freshly sawn discs of apple wood waiting to be dried == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:09, 5 September 2017 | Apple logs prepared.JPG (file) |  |
252 KB | == Summary == logs and discs of apple wood prepared for a drying experiment == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:07, 5 September 2017 | Wooden smoothing plane.JPG (file) |  |
279 KB | == Summary == a smoothing plane, used to smoothen and finish wood surfaces == Licensing == {{CC-by-sa-4.0}} | 1 |
| 08:59, 5 September 2017 | Wood screws.JPG (file) |  |
353 KB | == Summary == a pile of 4{{x}}50 mm wood screws with PZ 2 drive == Licensing == {{CC-by-sa-4.0}} | 1 |
| 08:58, 5 September 2017 | Wood carving chisels.JPG (file) |  |
102 KB | == Summary == Set of twelve simple wood carving chisels. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 08:56, 5 September 2017 | Wood-glue.jpg (file) |  |
177 KB | a bottle of PVA wood glue | 1 |
| 08:54, 5 September 2017 | Wire brushes.JPG (file) |  |
94 KB | == Summary == Brass (top) and steel (bottom) wire brushes. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 08:52, 5 September 2017 | Weights not clamps.jpg (file) |  |
363 KB | == Summary == It does not always have to be clamps: sometimes, adding enough weight to the board or sheet you want to saw through can secure it just as well and you don't have obstacles in your cutting path. == Licensing == {{CC... | 1 |
| 08:51, 5 September 2017 | Weighing silicone.JPG (file) |  |
271 KB | == Summary == a workspace prepared for silicone molding with template, hot glue gun, measuring cup and scale == Licensing == {{CC-by-sa-4.0}} | 1 |
| 08:50, 5 September 2017 | Washers.JPG (file) |  |
223 KB | == Summary == a pile of 4.3 mm washers == Licensing == {{CC-by-sa-4.0}} | 1 |
| 08:48, 5 September 2017 | Visicut-Icon.png (file) |  |
12 KB | From the Visicut repository: The VisiCut Icon "icon.png" is from the icon pack "Pry System" by "Jonas Rask Design" and licensed under "Freeware Non-commercial" | 1 |
| 21:43, 4 September 2017 | Various adhesive tapes.JPG (file) |  |
129 KB | == Summary == Our most commonly used adhesive tape varieties. Check out the clickable version on its material page! == Licensing == {{CC-by-sa-4.0}} | 1 |
| 21:42, 4 September 2017 | VHS table assembly site.jpg (file) |  |
457 KB | == Summary == halfway through assembling the VHS couch table legs == Licensing == {{CC-by-sa-4.0}} | 1 |
| 21:40, 4 September 2017 | Torsion springs.jpg (file) |  |
366 KB | == Summary == two torsion springs == Licensing == {{CC-by-sa-4.0}} | 1 |
| 21:39, 4 September 2017 | Tinkercad screenshot.JPG (file) |  |
147 KB | == Summary == Screenshot of a simple model created in Tinkercad. Tinkercad and the Tinkercad logo are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries. Autodesk screen shot... | 1 |
| 21:39, 4 September 2017 | Tin snips.jpg (file) |  |
269 KB | == Summary == Photo of our snips == Licensing == {{PD}} | 1 |
| 21:38, 4 September 2017 | Tension springs.jpg (file) |  |
298 KB | == Summary == two tension springs == Licensing == {{CC-by-sa-4.0}} | 1 |
| 21:37, 4 September 2017 | TBB done.jpg (file) |  |
620 KB | == Summary == finished "typewriter bicycle bell" == Licensing == {{CC-by-sa-4.0}} | 1 |
| 21:36, 4 September 2017 | TBB-9.JPG (file) |  |
464 KB | == Summary == all the equipment used to shape a typewriter side wall into a bicycle compatible piece == Licensing == {{CC-by-sa-4.0}} | 1 |
| 21:35, 4 September 2017 | TBB-8.JPG (file) |  |
384 KB | == Summary == preparing to drill through a bicycle handle mount in order to complete the typewriter bicycle bell == Licensing == {{CC-by-sa-4.0}} | 1 |
