CoMakingSpace Wiki - User Contributions [en]

WilTec 65415

2026-02-06T19:40:20Z

Utis: /* WilTec 65415 */ QR-Code done

==WilTec 65415==
{{MachineInfoBox
|machine name=WilTec 65415
|german=Spindel- und Bandschleifer
|image=Spindle Sander.jpg
|assetid=213
|synonyms=
|manual=[https://service.wiltec.de/manuals/65/65415/EN/65415-doc-en.pdf wiltec.de]
|material=[[Material:Wood|Wood]]
|used with=610{{x}}98 mm [[Sanding Belts|sanding belts]],
115{{x}}51/38/26/19/13 mm [[Sanding Sleeves|sanding sleeves]]
|similar=Belt and Disc Sander}}
[[File:Spindle Sander Manual.png|thumb|part numbers from the manual]]
This oscillating spindle and belt sander offers highly versatile sanding options in one compact sanding machine. The 16 mm oscillation height reduces friction and extends the lifespan of sanding sleeves, which makes it suitable for challenging woodworking tasks. Combining an oscillating spindle and a belt sander, this sanding machine allows you to easily sand edges, curves and surfaces. The combination of rotation and vertical oscillation ensures an even finish with minimal effort.

The sanding table tilts up to 45°, which allows you to easily sand beveled edges. The originally included sanding media's grit ''(Körnung)'' is 80.

This machine needs to stay screwed or clamped to a table for safe use!

=== Specs ===
* motor: 500 W, 2000 rpm
* compatible sanding sleeves: height 115 mm
** ⌀ 51 mm (2″)
** ⌀ 38 mm (1.5″)
** ⌀ 26 mm (1″)
** ⌀ 19 mm (0.75″)
** ⌀ 13 mm (0.5″) - without rubber roller

{{Commissioning
|Naming=Done
|Manual=Done
|Picture=Done
|Documentation=done
|DocumentationComment=
|Introduction=done
|IntroductionComment=[[Stationary Sander Introduction]]
|OwnerValue=Done
|Security=done
|SecurityComment=
|Test=done|QR=Done}}

=== Spindle Sander Mode ===
Place the fan wheel '''(26)''' with the flat side down on the spindle '''(11).''' Note! Ensure it is firmly in place. You may need to manually rotate the fan wheel '''(26)''' slightly to seat it correctly. Place the desired sanding roller '''(21)''' on the spindle '''(11).''' Attach one of the matching washers '''(24/25/27)''' to the spindle '''(11).''' Hand-tighten the nut '''(23)''' onto the spindle '''(11)''' using the open-end spanner '''(18)''' and firmly holding the sanding roller in place. It is tight enough when you can no longer easily lift the sandpaper sleeve off the roller.

Insert the large bench insert '''(10)''' into the workbench '''(4).''' Insert the appropriate round bench insert '''(22)''' for the sanding roller '''(21)''' into the recess of the large bench insert '''(10).''' The size specifications of the bench insert and the sanding roller MUST match. The sizes of the bench inserts and sanding rollers are indicated under the corresponding storage '''(6)''' on the device.
[[File:Spindle Sander Side1.jpg|thumb|proper assembly for spindle sanding]]

=== Belt Sander Mode ===
The belt run can be corrected using the adjusting screw '''(1)''' or the sanding belt lever '''(2).''' Note! The sanding belt must not be allowed to sand on the workbench '''(4)''' or the bench insert '''(10)''' when the machine is running, otherwise the sanding belt will be damaged.

If the sanding belt moves, it must be minimally adjusted via the adjusting screw '''(1).''' To push the sanding belt upwards, turn the adjusting screw '''(1)''' clockwise. To move it down, turn the adjusting screw '''(1)''' counterclockwise.

If the sanding belt shifts significantly, the position of the sanding belt must be corrected by temporarily loosening the sanding belt lever '''(2)''' and then finely adjusted using the adjusting screw '''(1).'''
[[File:Spindle Sander.jpg|thumb|belt sander mode]]

=== Spare Parts ===
In case we lose any of the bench inserts, [[Finno]] designed 3D printable replacements already: [https://github.com/comakingspace/Parts/tree/main/WilTec%2065415 github.com/comakingspace/Parts]

The spindle washers (parts 27/24/25) are M8 with 17, 22 and 46 mm in outer diameter.

Siglent SDS814X HD

2026-02-06T19:39:10Z

Utis: /* Siglent SDS814X HD */ QR-Code done

==Siglent SDS814X HD==
{{MachineInfoBox
|machine name=Siglent SDS814X HD
|german=Oszilloskop
|image=Siglent SDS814X HD.jpg
|synonyms=
|manual=[https://www.siglent.eu/_downloads/f5785f8a04b8cc556ced1cf3be08611c siglent.eu]
|material=
|used with=
|similar=
|software=
|firmware=
|assetid=207
}}

The [https://www.siglent.eu/product/13555727/siglent-sds814x-hd-4ch-100mhz-12bit-oscilloscope Siglent SDS814X HD] is a four channel [https://en.wikipedia.org/wiki/Digital_storage_oscilloscope digital storage oscilloscope] with 12-bit resolution and a bandwidth of 100 MHz.

Decoding the I2C, SPI, UART, CAN and LIN protocols is possible via the serial bus trigger.

The display is a capacitive touch screen. Alternatively, it can be controlled via USB keyboard / mouse.
There are two USB-A ports which can also be used to connect storage devices.
In the back, there's also a RJ45 Ethernet port which allows for remote control via a web browser.

The SDS814X HD is programmable via the [https://en.wikipedia.org/wiki/Standard_Commands_for_Programmable_Instruments SCPI language]. It is possible to automatize data aquisition e.g. in Python. A programming guide is available on [https://www.siglent.eu/_downloads/58a44eae4a3dcf689f480a3235ca937a siglent.eu].

There's also a [https://youtu.be/XYTfKCJgeOQ video review of the Siglent SDS814X HD on youtube].

{{Commissioning
|IssueNumber=360
|Naming=done
|NamingComment=
|Picture=done
|PictureComment=
|Manual=done
|ManualComment=
|Documentation=
|DocumentationComment=Specs can be found on [https://www.siglent.eu/product/13555727/siglent-sds814x-hd-4ch-100mhz-12bit-oscilloscope siglent.eu]. The most relevant should be mentioned on this page as well
|QR=Done
|QRComment=
|Introduction=
|IntroductionComment=
|Security=
|SecurityComment=
|Test=
|TestComment=
|OwnerValue=done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

=== Available Probes ===
==== Siglent PP510 ====
This Oscilloscope came with 4 Siglent PP510 probes. You can find the user guide on [https://siglentna.com/wp-content/uploads/2020/02/PP510_Users_Guide_082017.pdf siglentna.com]

OpenBuilds BlackBox CNC

2026-02-06T19:38:21Z

Utis: /* OpenBuilds BlackBox CNC */ QR-Code done

== OpenBuilds BlackBox CNC==
{{MachineInfoBox
|machine name=OpenBuilds BlackBox CNC
|german=CNC-Plattenfräse
|image=BlackBox CNC router mill.png
|synonyms=DE: CNC-Fräse, CNC-Plattenfräse, Portalfräsmaschine
|material=[[wood]]
|firmware=[[grbl]]
|assetid=201
|software=
|manual=[https://produkte.mafell.de/media/f1/f1/ba/1734454431/fm800_fm1000_170875_0324_-_zoom.pdf router], [https://docs.openbuilds.com/doku.php?id=docs:blackbox-4x:start BlackBox-4x]
|used with= 3mm, 6mm, 8mm [[End Mills|end mills]]; ''some'' kinds of [[Router Bits|router bits]]
|similar=[[router]], [[CNC Mill|CNC mill]]
}}
This [[User:Freegroup|self-built]] CNC router arrived at the Space in early 2025 and waits for '''your''' help to shine ;-)

{{Commissioning
|IssueNumber=367
|Naming=
|NamingComment=named after its controller
|Picture=done
|PictureComment=
|Manual=
|ManualComment=[[BlackBox_CNC_router_mill.png]]
|Documentation=
|DocumentationComment=
|QR=Done
|QRComment=
|Introduction=
|IntroductionComment=
|Security=
|SecurityComment=
|Test=
|TestComment=
|OwnerValue=
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

=== Using the BlackBox CNC ===
We have various wiki pages documenting how to use the '''WorkBee''' CNC. Maybe some of these can be adapted to include info on the BlackBox? Let's only create extra pages where really necessary:

* [[WorkBee Machine Operation]] for general machine operation (on/off, starting jobs, jogging, etc)
* [[WorkBee organization]] for keeping things tidy
* [[Autodesk Fusion 2D Contour Machining]] for CAM (Creating G-Code for the Machine)

=== Workflow ===
------- just copied from WorkBee so far --------

'''This is just an overview and does NOT replace the [[CNC Router Introduction|personal introduction]]!'''

# create the tool paths in a suitable CAM software (e.g. [[Fusion 360]])
# [[CNC Router Workholding|secure your workpiece]] on the machine's bed
# insert the appropriate collet & bit as defined in your tool paths
# home the machine, jog to your workpiece origin and zero your work coordinates
# Upload your generated G-Code
# put on [[PPE|personal protection]]
# Run your Program
# Once the Machine has homed, turn on the spindle & vac on the control panel (only works after homing)
# Be ready to hit the Emergency Stop in case SHTF. Your Program is running!

=== Router ===

The router mounted to it is a Mafell FM800 [https://produkte.mafell.de/fraesen/fraesmotor/fraesmotor-fm-800]. You need to consider the sizes of its collets (''Spannzangen'') when buying your router bits.

* no-load speed: 7000 - 25000 rpm
* max cutter diameter: 36 mm
* available collet diameters:
** 8 mm
** 6 mm
** 3 mm

==== RPM Chart ====
The RPM value is set on the router via a dial, settings in the g-code are not obeyed. You can change the router RPM value during operation if needed.
{| class="wikitable"
!Dial Setting
!Approx. RPM
|-
|1
|7000
|-
|2
|10600
|-
|3
|14200
|-
|4
|17800
|-
|5
|21400
|-
|6
|25000
|}

=== Spoilboard ===
---- workholding options, replacement? -----

=== Dust Extraction ===
--- ??? ----

Makita DTD173

2026-02-06T19:36:29Z

Utis: /* Makita DTD173 */ QR-Code done

==Makita DTD173==
{{MachineInfoBox
|machine name=Makita DTD173
|german=Schlagschrauber
|image=Makita-DTD173.jpg
|synonyms=impact wrench, impact driver, impact screwdriver, Akku-Schlagschrauber, Schrauber, Drehschlagschrauber, Schlagbohrschrauber
|manual=[https://www.icmsmakita.eu/CMS/custom/fi/attachments/user_manuals/User_manuals_EU2/DTD173.pdf icmsmakita.eu]
|material=wood, metal, concrete, plastic
|used with=1/4" hex impact-rated screwdriver bits Impact bit holders Socket adapters (1/4" hex to square drive) Impact sockets (with adapter) Nut setters (impact-rated) Long or torsion bits
|similar=
|software=
|firmware=
|assetid=218
}}

⚠️Only use impact-rated bits. DO NOT use this machine with regular bits!⚠️

The Makita DTD173 is a compact and powerful 18 V cordless impact driver designed primarily for driving screws and bolts. It features a brushless motor, electronic speed control, and a lightweight housing for reduced user fatigue and excellent handling in confined spaces.

The impact mechanism delivers high torque through rotational hammering, allowing efficient fastening with minimal kickback. Speed and impact force are controlled via the variable-speed trigger and electronic modes.

This tool operates with '''[[18 V LXT batteries]]''' and uses a '''1/4" [[Screwdriver_Bits#Bit_Holders|hex bit holder]]''' for quick, tool-less bit changes.

* No torque clutch is included
* Louder than a standard [[Cordless Drills|cordless drill]] due to impact mechanism
* Should not be used for delicate or fine mechanical work

== Key Features ==

* Brushless motor for high efficiency and long service life
* Variable speed trigger for controlled fastening
* Electronic modes for different applications
* Compact and lightweight design
* Built-in LED work light
* 1/4" hex quick-release bit holder
* Compatible with Makita 18 V LXT battery system

== Proper Use ==

* Designed for driving screws and bolts, not for drilling
* Best used with impact-rated bits and accessories
* Speed and torque are controlled by trigger pressure

* '''''Not suitable''''' for precision torque applications
{{Commissioning
|IssueNumber=396
|Naming=Done
|NamingComment=
|Picture=Done
|PictureComment=
|Manual=Done
|ManualComment=https://www.makita.com.hk/upload/product/970/file_en/643cc4c23d38a.pdf
https://www.icmsmakita.eu/CMS/custom/fi/attachments/user_manuals/User_manuals_EU2/DTD173.pdf
|Documentation=Done
|DocumentationComment=
|QR=Done
|QRComment=
|Introduction=Done
|IntroductionComment=[[Drill Introduction]] - already updated
|Security=
|SecurityComment=
|Test=Done
|TestComment=
|OwnerValue=Done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

Makita DJV181

2026-02-06T19:35:58Z

Utis: /* Makita DJV181 */ QR-Code done

==Makita DJV181==
{{MachineInfoBox
|machine name=Makita DJV181
|german=Stichsäge
|image=Makita-DJV181.jpg
|synonyms=DE:Stichsäge
|manual=[https://www.icmsmakita.eu/CMS/custom/fi/attachments/user_manuals/User_manuals_EU2/DJV181.pdf icmsmakita.eu]
|material=
|used with=
|similar=
|software=
|firmware=
|assetid=217
}}

This cordless Makita Jigsaw was donated via [[:Category:Bonus Programs|Bauhaus Bonusprogram]].

Key features are:
* three-stage pendulum action
* tool-free blade change.
* Engine speed can be adjusted between 800 and 3 500 min.
* stroke length: 26 mm
* cutting capacity: 135 mm in wood and 10 mm in steel
* can be used with external extraction
* works with T-Shade blades.

To adjust the speed, use the dial at the end of the handle.
{| class="wikitable"
|+
!Position
!Cutting action
!Applications
|-
|0
|Straight line
cutting action
|For cutting mild steel, stainless steel and plastics. For clean cuts in wood and plywood.
|-
|I
|Small orbit cutting action
|For cutting mild steel, aluminum and hard wood.
|-
|II
|Medium orbit cutting action
|For cutting wood and plywood. For fast cutting in aluminum and mild steel.
|-
|III
|Large orbit cutting action
|For fast cutting in wood and plywood.
|}
{| class="wikitable"
|+
!Workpiece to be cut
!Number on adjusting dial
|-
|Wood
|4 - 6
|-
|Mild steel
|3 - 6
|-
|Stainless steel
|3 - 4
|-
|Aluminum
|3 - 6
|-
|Plastics
|1 - 4
|}
{{Commissioning
|IssueNumber=394
|Naming=Done
|NamingComment=
|Picture=Done
|PictureComment=
|Manual=Done
|ManualComment=https://cdn.axminstertools.com/media/downloads/506274_manual.pdf https://www.icmsmakita.eu/CMS/custom/fi/attachments/user_manuals/User_manuals_EU2/DJV181.pdf --> Directly from Makita Page should (hopefully) be better
|Documentation=Done
|DocumentationComment=
|QR=Done
|QRComment=
|Introduction=Done
|IntroductionComment=[[Jigsaw Introduction]] needs to be checked for adjustment needs
|Security=
|SecurityComment=
|Test=
|TestComment=
|OwnerValue=Done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

Könighaus P-800

2026-02-06T19:34:57Z

Utis: /* Könighaus P-800 */ QR-Code done

==Könighaus P-800==
{{MachineInfoBox
|machine name=Könighaus P-800
|german=Heizung
|image=
|synonyms=DE: Infrarotheizung
|manual=[https://koenighaus-infrarot.de/wp-content/uploads/2023/10/KH_Anleitung_Heizung_2023_DE.pdf DE], [https://koenighaus-infrarot.de/wp-content/uploads/2023/10/KH_Anleitung_Heizung_2023_EN.pdf EN]
|material=
|used with=
|similar=
|software=
|firmware=
|assetid=219
}}

{{Commissioning
|IssueNumber=309
|Naming=Done
|NamingComment=
|Picture=
|PictureComment=
|Manual=Done
|ManualComment=
|Documentation=
|DocumentationComment=
|QR=Done
|QRComment=
|Introduction=
|IntroductionComment=
|Security=
|SecurityComment=
|Test=
|TestComment=
|OwnerValue=Done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

Fujitsu Celsius H780

2026-02-06T19:34:14Z

Utis: /* Fujitsu Celsius H780 */ QR-Code done

==Fujitsu Celsius H780==
{{MachineInfoBox
|machine name=Fujitsu Celsius H780
|german=
|image=
|synonyms=
|manual=
|material=
|used with=
|similar=
|software=
|firmware=
|assetid=210
}}

This laptop was a donation and is used mainly for [[seminars]] and operating the large format [[Inkjet Printer|inkjet printer]]. Thus, the following software has been installed:
* [[Adobe Photoshop Elements]]
* The driver for our [[EPSON Stylus Pro 7800]]

{{Commissioning
|IssueNumber=
|Naming=done
|NamingComment=
|Picture=
|PictureComment=
|Manual=not needed
|ManualComment=
|Documentation=done
|DocumentationComment=
|QR=done
|QRComment=
|Introduction=not needed
|IntroductionComment=
|Security=done
|SecurityComment=by {{NL}}
|Test=done
|TestComment=by {{NL}}
|OwnerValue=done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

Bosch GEX 40-150 (2)

2026-02-06T19:33:00Z

Utis: /* Bosch GEX 40-150 (2) */ QR-Code done

== Bosch GEX 40-150 (2) ==
{{MachineInfoBox
|machine name=Bosch GEX 40-150
|german=Exzenterschleifer
|image=Bosch GEX 40-150.jpeg
|material=[[wood]]
|used with=150 mm [[Sanding Discs]]
|location=[[Location::Sanding Area]]
|manual=[https://manuall.de/bosch-gex-40-150-exzenterschleifer/ manuall.de]
|assetid=214
}}{{Commissioning|Naming=Done|Manual=Done|Introduction=Done|OwnerValue=Done|IntroductionComment=Not needed, as we just bought an additional machine of something we already had.|QR=Done}}

LG 65QNED70A6A (2)

2026-02-06T19:31:11Z

Utis: /* LG 65QNED70A6A (2) */ QR-Code done

==LG 65QNED70A6A (2)==
{{MachineInfoBox
|machine name=LG 65QNED70A6A (2)
|german=
|image=
|synonyms=
|manual=[http://kr.eguide.lgappstv.com/manual/w25/w25_eu09/ger.html german], [http://kr.eguide.lgappstv.com/manual/w25/w25_eu09/eng.html english]
|material=
|used with=
|similar=
|software=
|firmware=
|assetid=212
}}

This is the '''right''' TV in our [[Seminar Area]]

Key Specs:
* Screen Size: 65" (165cm)
* Aspect ratio: 16:9
* Resolution: 3.840 x 2.160
* Operating System: webOS
* Screen technology: QNED
{{Commissioning
|IssueNumber=
|Naming=done
|NamingComment=
|Picture=
|PictureComment=
|Manual=done
|ManualComment=
|Documentation=
|DocumentationComment=
|QR=Done
|QRComment=
|Introduction=not needed
|IntroductionComment=
|Security=Done
|SecurityComment=
|Test=Done
|TestComment=
|OwnerValue=done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

LG 65QNED70A6A (1)

2026-02-06T19:29:49Z

Utis: /* LG 65QNED70A6A (1) */ QR-Code done

==LG 65QNED70A6A (1)==
{{MachineInfoBox
|machine name=LG 65QNED70A6A (1)
|german=
|image=
|synonyms=
|manual=[http://kr.eguide.lgappstv.com/manual/w25/w25_eu09/ger.html german], [http://kr.eguide.lgappstv.com/manual/w25/w25_eu09/eng.html english]
|material=
|used with=
|similar=
|software=
|firmware=
|assetid=211
}}

This is the '''left''' TV in our [[Seminar Area]]

Key Specs:
* Screen Size: 65" (165cm)
* Aspect ratio: 16:9
* Resolution: 3.840 x 2.160
* Operating System: webOS
* Screen technology: QNED
{{Commissioning
|IssueNumber=
|Naming=done
|NamingComment=
|Picture=
|PictureComment=
|Manual=done
|ManualComment=
|Documentation=
|DocumentationComment=
|QR=Done
|QRComment=
|Introduction=not needed
|IntroductionComment=
|Security=Done
|SecurityComment=
|Test=Done
|TestComment=
|OwnerValue=done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

LG 65QNED70A6A (1)

2026-02-06T19:27:21Z

Utis: /* LG 65QNED70A6A (1) */

==LG 65QNED70A6A (1)==
{{MachineInfoBox
|machine name=LG 65QNED70A6A (1)
|german=
|image=
|synonyms=
|manual=[http://kr.eguide.lgappstv.com/manual/w25/w25_eu09/ger.html german], [http://kr.eguide.lgappstv.com/manual/w25/w25_eu09/eng.html english]
|material=
|used with=
|similar=
|software=
|firmware=
|assetid=211
}}

This is the '''left''' TV in our [[Seminar Area]]

Key Specs:
* Screen Size: 65" (165cm)
* Aspect ratio: 16:9
* Resolution: 3.840 x 2.160
* Operating System: webOS
* Screen technology: QNED
{{Commissioning
|IssueNumber=
|Naming=done
|NamingComment=
|Picture=
|PictureComment=
|Manual=done
|ManualComment=
|Documentation=
|DocumentationComment=
|QR=
|QRComment=Done
|Introduction=not needed
|IntroductionComment=
|Security=Done
|SecurityComment=
|Test=Done
|TestComment=
|OwnerValue=done
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

Modifi3D

2025-09-12T17:40:41Z

Utis: Add image

{{ToolInfoBox
|tool name=Modifi3D (3D print finishing tool)
|german=3D Druck Finishing Tool|image=Modifi3D.jpg
|synonyms=3D print finishing tool; DE:3D Druck Finishing Tool
|type=
|material=[[Filament]]
|used with=3D prints only, '''no wood or solder'''
|location=[[Location::Electronics Room|electronics room]]
|access=read this page & the manual
|tutors=[[User:Mitja|Mitja]]
|manual=[http://www.steelmans3d.com/modifi3d.html#how manufacturer website]
|similar=[[Soldering Irons|soldering irons]], [[Pyrography Burner|pyrography burner]]
}}

The Modifi3D finishing tool has a heated top, similar to a soldering iron (please do not use regular soldering irons on plastic). It comes with multiple tips for different tasks:

* knife tip for cutting off parts or cleaning up edges
* needle tip for small holes
* point tip for larger holes
* scoop tip to hollow out parts

Please use this tool on '''3D printer material only'''! It is USB powered (8W), will heat up in 15 seconds and cool down in 30 seconds after unplugging.
Heating will start after touching the metal knob (touch switch), after 25 seconds the tool will go into sleep mode. It comes with a small sheet metal stand to rest on while hot.

== Caution ==

* Heated tip can cause fires or burn your skin. Place it on the stand and wait until it is cooled down before exchanging tips.
* Do not file the tips.

[[Category:3D Printing]]

File:Modifi3D.jpg

2025-09-12T17:39:36Z

Utis:

Picture of Tool

User:Utis

2025-07-03T12:57:43Z

Utis: /* Tools I am a tutor for */

{{UserInfoBox
|real_name= Utis
|pronouns= he/him
|image=ProfilPic.jpg
|expertise=
|interests= woodworking/art/making
|projects=
|email= utis.travel(at)gmail.com
|website=
|instagram= _utis
|twitter=
|github=
|printables=
|thingiverse=
|telegram=
}}
I'm a student at the university and in my 12 semester of my bachelor in applied computer science. I grew up surrounded by art and crafts. I love working with wood, metal and paint. I see myself as a maker and I try to create everything i need within my possibility, therefor I like to learn new things all the time and share the knowledge I have.

I always have a lot of projects in my mind and want to do them all at once without finishing one.

== Projects ==
=== "Completed" Projects ===
Completed in the space
* pizza shovel[[File:Tattoopen.jpg|thumb|Tattoopen]][[File:Pizza peel.jpg|thumb|Pizza shovel]]
* 3D printed Tatoopen for stick and poke
=== Ongoing Projects & Stuff ===
* Kitchen knives
* hot metal corner
** a forge
* 3D printing a pi case
* 3D printing a showerhead holder
* engrave a picture in glass

==Tools I am allowed to use==
*[[3D Printers]]
*[[Bandsaw]]
*[[Bench Grinders]]
*[[Biscuit Joiner]]
*[[CNC Router]]
*[[Chop Saw]]
*[[Compressor]]
*[[Disc Grinders]]
*[[Drills|Drill]]
*[[Drill Press]]
*[[Handheld Circular Saw]]
*[[Handheld Router]]
*[[Handheld Sanders]]
*[[Heat Gun]] and [[Hot Air Soldering Station]]
*[[Hot Glue Gun]]
*[[Jigsaws]]
*[[Jointer-Planer]]
*[[Laser Cutter]]
*[[Metal Lathe]]
*[[Oscillating Tool]]
*[[Reciprocating Saw]]
*[[Rotary Tool]]
*[[Scroll Saw]]
*[[Sewing Machine]]
*[[Soldering Irons]]
*[[Stationary Sanders|Stationary Sander]]
*[[Table Saw]]
*[[Wood Lathe]]
*[[Sliding Table Saw]]
*[[Airbrush Compressor|Airbrush]]

== Tools I am a tutor for==
{{#ask: [[Tutor::User:Utis]]
| format=ul
}}

===Missing Introductions===
*[[Welding Transformer]]
*[[Blast Cabinet]] (not yet available)
*[[CNC Mill]]
*[[Elektrohobel]]
*[[Horizontal Bandsaw]]
*[[Plastic Shredder]]

Waiting Lists

2025-02-19T18:27:06Z

Utis: /* Sliding Table Saw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaxtously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[User:Edgar|Edgar]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:FMO|Frank]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:Edgar|Edgar]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Edgar|Edgar]]
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:FMO|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Chris H]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*Volker
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:Edgar|Edgar]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Edgar|Edgar]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD - machine [https://github.com/comakingspace/do-something/issues/305 in commissioning!]

'''Waiting Members:'''
*[[NitramLegov|Martin]]
*[[User:Jakob|Jakob]]
*[[User:Anita|Anita]]
*[[FabianM|Fabian]]
*[[Björn]]
*[[Philip]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Utis|Utis]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[Chris H]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: TBD

'''Waiting Members:'''
*[[User:FabianM|Fabian]]
*[[User:Baumphil|baumphil]]
*[[User:Ol|Oliver]]
*[[User:FranKNG|Frank K.]]
*[[Volker]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

User:Utis

2024-06-22T14:49:12Z

Utis:

I'm a student at the university and in my 12 semester of my bachelor in applied computer science. I grew up surrounded by art and crafts. I love working with wood, metal and paint. I see myself as a maker and I try to create everything i need within my possibility, therefor I like to learn new things all the time and share the knowledge I have.

I always have a lot of projects in my mind and want to do them all at once without finishing one.

{{UserInfoBox
|real_name= Utis
|pronouns= he/him
|image=ProfilPic.jpg
|expertise=
|interests= woodworking/art/making
|projects=
|email= utis.travel(at)gmail.com
|website=
|instagram= _utis
|twitter=
|github=
|printables=
|thingiverse=
|telegram=
}}

== Projects ==
=== "Completed" Projects ===
Completed in the space
* pizza shovel[[File:Tattoopen.jpg|thumb|Tattoopen]][[File:Pizza peel.jpg|thumb|Pizza shovel]]
* 3D printed Tatoopen for stick and poke
=== Ongoing Projects & Stuff ===
* Kitchen knives
* hot metal corner
** a forge
* 3D printing a pi case
* 3D printing a showerhead holder
* engrave a picture in glass

==Tools I am allowed to use==
*[[3D Printers]]
*[[Bandsaw]]
*[[Bench Grinders]]
*[[Biscuit Joiner]]
*[[CNC Router]]
*[[Chop Saw]]
*[[Compressor]]
*[[Disc Grinders]]
*[[Drills|Drill]]
*[[Drill Press]]
*[[Handheld Circular Saw]]
*[[Handheld Router]]
*[[Handheld Sanders]]
*[[Heat Gun]] and [[Hot Air Soldering Station]]
*[[Hot Glue Gun]]
*[[Jigsaws]]
*[[Jointer-Planer]]
*[[Laser Cutter]]
*[[Metal Lathe]]
*[[Oscillating Tool]]
*[[Reciprocating Saw]]
*[[Rotary Tool]]
*[[Scroll Saw]]
*[[Sewing Machine]]
*[[Soldering Irons]]
*[[Stationary Sanders|Stationary Sander]]
*[[Table Saw]]
*[[Wood Lathe]]

== Tools I am a tutor for==
{{#ask: [[Tutor::User:Utis]]
| format=ul
}}

===Missing Introductions===
*[[Airbrush Compressor|Airbrush]]
*[[Welding Transformer]]
*[[Blast Cabinet]] (not yet available)
*[[CNC Mill]]
*[[Elektrohobel]]
*[[Horizontal Bandsaw]]
*[[Plastic Shredder]]
*[[Sliding Table Saw]]

File:ProfilPic.jpg

2024-06-22T14:47:39Z

Utis:

This is me

User:Utis

2024-06-22T14:42:55Z

Utis:

I'm a student at the university and in my 12 semester of my bachelor in applied computer science. I grew up surrounded by art and crafts. I love working with wood, metal and paint. I see myself as a maker and I try to create everything i need within my possibility, therefor I like to learn new things all the time and share the knowledge I have.

I always have a lot of projects in my mind and want to do them all at once without finishing one.

{{UserInfoBox
|real_name= Utis
|pronouns= he/him
|image=
|expertise=
|interests= woodworking/art/making
|projects=
|email= utis.travel(at)gmail.com
|website=
|instagram= _utis
|twitter=
|github=
|printables=
|thingiverse=
|telegram=
}}

== Projects ==
=== "Completed" Projects ===
Completed in the space
* pizza shovel[[File:Tattoopen.jpg|thumb|Tattoopen]][[File:Pizza peel.jpg|thumb|Pizza shovel]]
* 3D printed Tatoopen for stick and poke
=== Ongoing Projects & Stuff ===
* Kitchen knives
* hot metal corner
** a forge
* 3D printing a pi case
* 3D printing a showerhead holder
* engrave a picture in glass

==Tools I am allowed to use==
*[[3D Printers]]
*[[Bandsaw]]
*[[Bench Grinders]]
*[[Biscuit Joiner]]
*[[CNC Router]]
*[[Chop Saw]]
*[[Compressor]]
*[[Disc Grinders]]
*[[Drills|Drill]]
*[[Drill Press]]
*[[Handheld Circular Saw]]
*[[Handheld Router]]
*[[Handheld Sanders]]
*[[Heat Gun]] and [[Hot Air Soldering Station]]
*[[Hot Glue Gun]]
*[[Jigsaws]]
*[[Jointer-Planer]]
*[[Laser Cutter]]
*[[Metal Lathe]]
*[[Oscillating Tool]]
*[[Reciprocating Saw]]
*[[Rotary Tool]]
*[[Scroll Saw]]
*[[Sewing Machine]]
*[[Soldering Irons]]
*[[Stationary Sanders|Stationary Sander]]
*[[Table Saw]]
*[[Wood Lathe]]

== Tools I am a tutor for==
{{#ask: [[Tutor::User:Utis]]
| format=ul
}}

===Missing Introductions===
*[[Airbrush Compressor|Airbrush]]
*[[Welding Transformer]]
*[[Blast Cabinet]] (not yet available)
*[[CNC Mill]]
*[[Elektrohobel]]
*[[Horizontal Bandsaw]]
*[[Plastic Shredder]]
*[[Sliding Table Saw]]

Prusa i3 MK3S+

2024-04-12T18:51:00Z

Utis: /* Prusa i3 MK3S+ */

==Prusa i3 MK3S+==
{{MachineInfoBox
|machine name=Original Prusa i3 MK3S+
|image=Original Prusa i3 MK3S+.jpg
|synonyms=
|type=3D Printer
|material=plastic [[filament]]
|location=[[Location::3D Printing Area]]
|status=in commissioning
|firmware=https://www.prusa3d.com/drivers/
|software=[[Slic3r]] Prusa Edition
|manual=[http://prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf prusa3d.com]
|assetid=161
}}In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [http://prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf handbook] and use the latest version of [[Slic3r]] available at the [https://www.prusa3d.com/drivers/ drivers and manuals page].

Please also note the differences between this printer and the other '''Original Prusa i3 MK2S''' listed in the General Usage Guidelines.

The build volume of this model is 250{{x}}210{{x}}210 mm.

==Commissioning==
{{Commissioning
|IssueNumber=
|Naming=done
|NamingComment=
|Picture=done
|PictureComment=
|Manual=done
|ManualComment=
|Documentation=
|DocumentationComment=
|QR=done
|QRComment=
|Introduction=
|IntroductionComment=
|Security=done
|SecurityComment=
|Test=done
|TestComment=
|OwnerValue=
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}
{| class="wikitable"
|+
!more Tasks
!comment
!Status
|-
|MK3s+ slicer-Profil anlegen
|Utis
|done
|-
|Document the difference to the MK2
|Utis
|done
|-
|}

3D Printers

2024-04-12T18:49:51Z

Utis: /* General Usage Guidelines */ Add differences between MK2S and MK3S+

[[File:Printer-farm.jpg|350px|thumb|right|Our 3D printer farm]]
'''This article is mandatory reading for anyone who would like to 3D print, but it does not replace a personal introduction!'''

All of our printers use "fused filament fabrication" (FFF, a.k.a. FDM) and are therefore limited to thermoplastics as [[3D Printing Materials|materials]]. Lots of cool things can be made with this technology, but it's good to be aware of the [[:Category:3D Printing#Fused Filament Fabrication|limits of FFF]] before starting to design your parts.

You can find our 3D printer farm in the [[Electronics Room|electronics room]].

== Available Printers ==
The Prusa 3D Printers P1 to P6 are on long term loan to the CoMakingSpace from our support partners Course Resource UG and the University of Heidelberg. P1 to P4 were built by participants of the euVENTION Summer School 2017 as part of the training programme provided by Course Resource UG and the University of Heidelberg. P5 and P6 are additional Course Resource UG training printers that are also made available to the CoMakingSpace members. Briefly, at euVENTION 2019, some of the printers returned to their role of supporting the Summer School participants in their rapid prototyping needs. However, now all six printers are again back at the CoMakingSpace available for our members use.

{{MachineInclusion|order=ascending}}

== General Usage Guidelines ==

'''Using the 3D printers, like any other [[machine]], requires a personal [[3D Printer Introduction|introduction]] - ask a [[tutor]] to get one!'''

=== Slicing ===

==== Bambu Lab Printers ====
Use the [https://github.com/SoftFever/OrcaSlicer Orca Slicer] that is installed on the slicer computer next to the 3D printers. Please check the [https://github.com/SoftFever/OrcaSlicer/wiki official Wiki] in case something is missing, or outdated (alternatively have a look at the [https://wiki.bambulab.com/en/software/bambu-studio/studio-pages-outline docs for Bambu Studio], which Orca Slicer is based on).

===== Starting a print =====

* Import your 3D model file (stl, 3mf etc.) into Bambu Studio
* Orient your part as necessary/optimal to print
* Print settings
** layer height
** filament settings (PLA, PETG, etc)
** any other quality/strength settings
* Slice the part (button is on the top right in Bambu Studio)
* Check if sliced model looks good
* '''Before''' sending the file to the printer make sure
** the printer is on
** the right filament is loaded into the right printer
** check the bed if it is clear and clean
* Upload the file to the printer
** disable the timelapse feature as is fills up the storage over time
** enable bed leveling
* Watch the first layer in case of an error

==== Prusa i3 Printers ====
A 3D model has to be virtually split into its layers ("[[:Category:Slicers|sliced]]") before a printer can start building it up layer by layer in reality. You can use [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition] with the default settings for the MK2S (MK2, doesn't matter) or MK3S+ provided by Prusa Research.

'''Attention!!!''' When printing with the MK3S+ make sure to check if the right setting is selected. You can do this by checking the textbox for the printer setting or the text on the virtual build plate.

The MK2S and MK3S+ are very similar.The biggest differences are the removable build plate and a slightly faster, quieter print.

The slicing for our printers is done on the computer in the [[Electronics Room]] using [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition].

'''Import'''

Put your [[STL]] file on a thumb drive and plug it into the slicer computer. Open Slic3r (orange/grey on the side bar) and drag the file into the program.

'''Print Settings'''

Presets can be selected on the "Plater" tab (where you see your model) on the left side. Its a good idea to chose the setting which fits your desired quality the most and make adjustments from there. Individual options can be changed in the "Print Settings" tab (e.g. support, infill, ...).

'''Filament Settings'''

All the available filament rolls should have a preset created for them, which can be selected in the "Plater" tab. If this on not the case ask a [[tutor]] for the settings.

''' Export G-Code '''

Press the "Export G-Code" button and save the file on the SD card of the printer. It's good practice to save your print files in a folder with your name.

''' Multi Material Printing '''

If your model requires [[Multi-Material Printing|multi-material printing]], this can be done using printer P6.

=== Do Your Math ===
A few simple calculations will save you a lot of time and material:
* shell thickness must be a multiple of the nozzle diameter
* elements very close to or below the nozzle diameter won't turn out well
* bottom/top thickness must be a multiple of your selected layer height

=== Supervision ===
* even simple prints can go wrong, so please watch the homing process and the first layer closely and check the progress regularly
* do not leave the printers unattended - you'll have to find someone else to supervise a print if you absolutely need to leave the building
* there is no need to sit in front of the machine all the time, just '''do not leave the Space!'''

=== Cleanliness ===
* for improved adhesion, remove any dust from the print bed and wipe it with a few drops of [[isopropanol]]
** do '''not''' use [[acetone]] on the PEI sheet, it will destroy the print bed!
* collect any clean plastic waste in the appropriate (material and color!)

=== SD Cards ===
* if you don't know a file, don't print it - ideally, slice all your models just before printing
* Bambu Printers: Use the Slicer to send the files to the printer via the network.

=== File Storage ===
* always back up your files on your own storage, our SDs and computers might be cleaned up at any time without much warning!
* do not use old [[Format:G-code|G-codes]] over and over again, but rather save your [[STL]]s and slice freshly for every print - there could have been changes to the machine since your last visit!

=== Material Donations ===
We try to keep the cost low to allow anyone to print. Apart from the [[filament]], we need new isopropanol from time to time.

Please [[Donation Boxes|donate]] for these expenses:
* 5 ct/gram material cost
* + any additional amount you like

=== Time/Material Estimation ===
To check the amount of filament and the rough time needed for a print we suggest to use the [http://gcode.ws gcode.ws online tool] and analyse the exported [[G-Code]] file there. The filament amount is usually quite accurate, but the print time in reality is usually 20-30% longer on our printers.

Some [[slicers]] also have built-in estimation features - unfortunately, our favorite [[Slic3r]] only estimates the required material, not the time.

== Maintenance ==

Prusa Research provides a [https://www.prusaprinters.org/top-6-tips-original-prusa-i3-3d-printer-maintenance/ list of maintenance tips].

[[Category:3D Printing]]

Prusa i3 MK3S+

2024-04-12T18:28:09Z

Utis: Added Picture, noted differences listed in the General Usage Guidelines

2021-08-12T12:13:12Z

Utis: I added my lecture to the list of programm

a.k.a. "Tor 4"

Bestimmt habt ihr schon einmal die Materialien im Gemeinschaftsraum gesehen oder [https://github.com/comakingspace/do-something/projects/4 hier und da] etwas aufgeschnappt: Wir haben eine großzügige Unterstützung der BASF-Kulturförderung "Tor 4" bekommen, weil wir unter dem Überthema "Wie geht Freiheit wirklich" mehrere Veranstaltungen im Jahr 2020 konzipiert hatten. 2020 fiel ja bekanntlich alles mögliche aus, weshalb es jetzt ernst wird: für den '''August 2021''' planen wir zwei Projekt-Wochenenden und können alle motivierten Mitglieder gebrauchen!

Allgemeine Infos:
* [https://www.basf.com/global/de/who-we-are/organization/locations/europe/german-sites/ludwigshafen/gesellschaftliches-engagement/woran-wir-arbeiten/arts-and-culture/Tor4/you-can-make-it.html '''Projektseite bei BASF Tor 4''']
* [https://www.comakingspace.org/tor4/ "Tor 4" auf unserer Website]
* [https://github.com/comakingspace/do-something/projects/4 Github-Projekt mit diversen "issues"]

Bitte tragt euch bei allem ein, wofür ihr Zeit oder Ideen habt :-) Diskussionen passen am besten auf [[Issue Tracker|github/do-something]] oder [[slack]] (#events), aber diese Seite ist sicher gut für die Faktensammlung. Fehlt etwas oder wurde es falsch übertragen, bitte einfach korrigieren!

== Grundidee ==
Es gibt immer praktische Workshops für 5-6 Leute und einen größeren Diskussionsabend (hybrid, bis zu 20 Personen vor Ort) am Samstag.

== "Urban Gardening" ==
* WANN?
** Datum: 21./22.8.
** Uhrzeiten: Workshop Sa 10-16 & So 13-16 Uhr; Diskussionsabend Sa 16-20 Uhr
** Anmeldungsseiten (Eventbrite): [https://www.eventbrite.de/e/you-can-make-it-handwerk-fur-alle-urban-gardening-tickets-164979182175 Workshop] // [https://www.eventbrite.de/e/diskussionsabend-urban-gardening-tickets-164979557297 Diskussionsabend]

* WER?
** Organisatoren (Zeit im Vorfeld und +- durchgängig währenddessen): [[Martin]], [[Lukas]], ...?
** "tech support" beim Abendprogramm: [[Patrick]]
** weitere Helfer (Zeit für ein paar Stunden): ...?

* WORKSHOP
** "baue deine eigene vertikale Farm"
** genaueres weiß [[Martin]]

* ABENDPROGRAMM - Themen und Leute willkommen!
** '''Vertical Farming''': [[Lukas]] könnte (gemischte!) Erfahrungen mit einer "Erdbeersäule" vorstellen
** Pilzzucht im Wohnzimmer: ursprünglich von [[User:Chris|Chris]] angeboten, der mittlerweile nicht mehr in HD ist - vielleicht als remote-Vortrag??
** Nachhaltigkeit und Bienenschutz: findet sich dafür jemand von der BASF? sonst [[Lukas]], dann aber bitte jemand anderes "vertical farming"
** Automatisierung - Möglichkeiten und Grenzen: ursprüngliche Idee von [[Martin]] (autom. Bewässerung etc), könnte evtl. notfalls mit vertical farming verschmelzen?

* weitere Baustellen
** Workshopvorbereitung: [https://github.com/comakingspace/do-something/issues/172 do-something #172]
** Plakatwerbung - [[Patrick]] mit Entwurf von [[Martin]]
** Digitalwerbung
*** meetup: [https://www.meetup.com/de-DE/Heidelberg-Makers-Meetup/events/279957709/ Workshop] // [https://www.meetup.com/de-DE/Heidelberg-Makers-Meetup/events/279957837/ Diskussionsabend]
*** Facebook: [https://www.facebook.com/events/382692563536011 Workshop] // [https://www.facebook.com/events/570046370668923 Diskussionsabend]
** Einladung besonderer Gäste zum Abendprogramm
*** BASF?
*** Gemeinschaftsgarten-Projekte?
*** ...?
** ...

== "Präzisionstechnik trifft Kunst" ==
* WANN?
** Datum: 28.8.
** Uhrzeiten: Workshop 13-19 Uhr, Diskussionsabend ''ab 19 Uhr''
** Anmeldungsseiten (Eventbrite): [https://www.eventbrite.de/e/you-can-make-it-prazisionstechnik-trifft-kunst-tickets-165678333355 Workshop] // [https://www.eventbrite.de/e/diskussionsabend-prazisionstechnik-trifft-kunst-tickets-165679444679 Diskussionsabend]

* WER?
** Organisatoren (Zeit im Vorfeld und +- durchgängig währenddessen): [[Martin]], [[User:Ozel|Ozel]], [[User:ErikSchatz|Erik]], [[User:Utis|Utis]] ...?
** "tech support" beim Abendprogramm: [[Patrick]]
** weitere Helfer (Zeit für ein paar Stunden): ...?

* WORKSHOP
** ursprüngliche Planung von [[Keno]] siehe [[Linoprint with Laser Engraving Workshop]] - darf natürlich angepasst werden!

* ABENDPROGRAMM mit Vorträgen und Diskussionen - Themen und Leute willkommen!
**'''Open Press Project''': da sollte mal der Initiator eingeladen werden - einfach mal anfragen?!
** '''KI-Kunst''': vielleicht so etwas wie deep dreaming oder Kunststil-Filter ("jedes Foto in einen van Gogh verwandeln")? - [[Martin]] fragt mal einen möglichen Startup-Kontakt, [[User:Andreas|Andreas]] hat sich als "Backup" angeboten
** '''kunstvolle PCB Designs''': Kurzvortrag/Demo von [[User:Ozel|Oliver]] zu Platinen und deren Gestalltung mit Vektorgrafiken in Inkscape & KiCAD, ähnlich zu [https://www.youtube.com/watch?v=xXRPw7ItMaM diesem Vortrag] - bringt ein paar Beispiele mit (Ohrringe, Postkarte, [https://kitspace.org/boards/github.com/kitspace/ruler/ Kitspace Lineal]), wer eigene kunstvolle PCBs vorstellen/zeigen möchte bitte gerne melden!
** '''3D-gedruckte Lithophanien''': Kurzvortrag/Demo von [[Kim]] zu "Relief-Lampen" (vom Foto zum 3D-Drucker)
** '''StencilKunst und Gravur''': Kurzvortrag/Demo von [[User:Utis|Utis]] zu multi layer stencil und Gravur mit dem [[Laser Cutter|Lasercutter]].

* weitere Baustellen
** Workshopvorbereitung: [https://github.com/comakingspace/do-something/issues/174 #174]
** Plakatwerbung - [[Patrick]] mit Entwurf von ...?
** Digitalwerbung
*** meetup: [https://www.meetup.com/de-DE/Heidelberg-Makers-Meetup/events/279957856/ Workshop] // [https://www.meetup.com/de-DE/Heidelberg-Makers-Meetup/events/279957920/ Diskussionsabend]
*** Facebook: [https://www.facebook.com/events/339962580965203 Workshop] // [https://www.facebook.com/events/2634324920203543 Diskussionsabend]
** Einladung besonderer Gäste zum Abendprogramm
*** BASF?
*** ...?
** ...

[[Category:Looking for Collaborators]]

Bandsaw Introduction/Waiting

2020-12-06T22:53:15Z

Utis:

{{Waiting Page
|IntroLink=[[Bandsaw Introduction|bandsaw introduction]]
|slots=2-4
|next=''TBD''
}}

* [[User:Karel|Karel]]
* [[User:Utis |Utis]]
* ''<add yourself here!>''