CoMakingSpace Wiki - User Contributions [en]

Network

2018-06-20T19:23:27Z

Olaf:

The network at the CoMakingSpace is built up as follows:

Internet ---> 1&1 Router ---> Netgear WNDR3700v4 ([[Freifunk]]) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

=== Internet Connection ===
In order to connect to the internet, you can use SSID freifunk-rhein-neckar.de

=== Internal Network ===
In order to connect to the internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The key can be found in the [[Common Room|common room]].

DHCP is configures as follows:
{| class = "wikitable"
|-
! IP !! Host
|-
|192.168.1.1 || TP-Link WDR4900
|-
|192.168.1.2 || Raspberry Pi (next to the [[Sound System|sound system]])
|-
|192.168.1.3 || [[Laser Printers#HP LaserJet 8150DN|Laserjet Printer]]
|-
|192.168.1.4 - 192.168.1.99 || Open for further static services
|-
|192.168.1.100 - 192.168.1.250 || IPs assigned by DHCP
|-
|192.168.1.255 || Broadcast address
|}

Within the internal network, the following services are provided:
{| class="wikitable"
|-
! Service !! Host-IP !! Hostname !! Port
|-
| Mopidy (MPD Daemon) || 192.168.1.2 || comakingcontroller || 6600
|-
| Mopidy (Webinterface) || 192.168.1.2 || comakingcontroller || 8888
|-
| SSH || 192.168.1.2 || comakingcontroller || 22
|-
| Printing || 192.168.1.3 || laserjet8150 || 631
|}

The static IPs will be assigned by the TP-Link WDR4900. If you want to add a service with a static IP please ask one of the TP-Link WDR4900 administrators to add your service and don't just grab a static IP.

=== Configuration Changes ===

* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact the [[management]]

* For changing settings on the Raspberry Pi, please contact the [[management]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]

* For changing settings on the TP-Link WDR4900, please contact the [[management]] or [[User:Olaf|Olaf]]

[[Category:Facilities]]
[[Category:Raspberry Pi]]

Network

2018-06-20T19:20:58Z

Olaf:

The network at the CoMakingSpace is built up as follows:

Internet ---> 1&1 Router ---> Netgear WNDR3700v4 ([[Freifunk]]) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

=== Internet Connection ===
In order to connect to the internet, you can use SSID freifunk-rhein-neckar.de

=== Internal Network ===
In order to connect to the internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The key can be found in the [[Common Room|common room]].

DHCP is configures as follows:
{| class = "wikitable"
|-
! IP !! Host
|-
|192.168.1.1 || TP-Link WDR4900
|-
|192.168.1.2 || Raspberry Pi (next to the [[Sound System|sound system]])
|-
|192.168.1.3 || [[Laser Printers#HP LaserJet 8150DN|Laserjet Printer]]
|-
|192.168.1.4 - 192.168.1.99 || Open for further static services
|-
|192.168.1.100 - 192.168.1.250 || IPs assigned by DHCP
|-
|192.168.1.255 || Broadcast address
|}

Within the internal network, the following services are provided:
{| class="wikitable"
|-
! Service !! Host-IP !! Hostname !! Port
|-
| Mopidy (MPD Daemon) || 192.168.1.2 || comakingcontroller || 6600
|-
| Mopidy (Webinterface) || 192.168.1.2 || comakingcontroller || 8888
|-
| SSH || 192.168.1.2 || comakingcontroller || 22
|-
| Printing || 192.168.1.3 || laserjet8150 || ???
|}

The static IPs will be assigned by the TP-Link WDR4900. If you want to add a service with a static IP please ask one of the TP-Link WDR4900 administrators to add your service and don't just grab a static IP.

=== Configuration Changes ===

* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact the [[management]]

* For changing settings on the Raspberry Pi, please contact the [[management]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]

* For changing settings on the TP-Link WDR4900, please contact the [[management]] or [[User:Olaf|Olaf]]

[[Category:Facilities]]
[[Category:Raspberry Pi]]

User:Olaf

2018-06-10T20:53:28Z

Olaf:

The preferred way to contact me regarding CoMakingSpace is to write a mail.

----
=====MAIL:=====

maker <dot> olaf <at> postfach <dot> cc
----

User:Olaf

2018-06-10T20:49:04Z

Olaf:

I am Olaf.

The preferred way to contact me regarding CoMakingSpace is to write a mail to
maker <dot> olaf <at> postfach <dot> cc

User:Olaf

2018-06-10T20:47:52Z

Olaf:

I am Olaf.

The preferred way to contact me regarding CoMakingSpace is to write a mail to maker.olaf@postfach.cc

Network

2018-06-10T20:45:12Z

Olaf: /* Configuration Changes */

The network at the Comakingspace is built up as follows:

Internet ---> 1&1 Router --->Netgear WNDR3700v4 ([[Freifunk]]) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

=== Internet Connection ===
In order to connect to the Internet, you can use SSID freifunk-rhein-neckar.de

=== Internal Network ===
In order to connect to the Internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The Key can be found at the space.
DHCP is configures as follows:
{| class = "wikitable"
|-
! IP !! Host
|-
|192.168.1.1 || TP-Link WDR4900
|-
|192.168.1.2 || Raspberry Pi (next to the Music)
|-
|192.168.1.3 || Lasertjet Printer
|-
|192.168.1.4 - 192.168.1.99 || Open for further static services
|-
|192.168.1.100 - 192.168.1.250 || IPs assigned by DHCP
|-
|192.168.1.255 || Broadcast address
|}

Within the internal network, the following services are provided:
{| class="wikitable"
|-
! Service !! Host-IP !! Hostname !! Port
|-
| Mopidy (MPD Daemon) || 192.168.1.2 || comakingcontroller || 6600
|-
| Mopidy (Webinterface) || 192.168.1.2 || comakingcontroller || 8888
|-
| SSH || 192.168.1.2 || comakingcontroller || 22
|-
| Printing || 192.168.1.3 || ??? || ???
|}

The static IPs will be assigned by the TP-Link WDR4900. If you want to add a service with a static IP please ask one of the TP-Link WDR4900 administrators to add your service and don't just grep a static IP.

=== Configuration Changes ===

* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact [[Management|the Management]]

* For changing settings on the Raspberry pi, please contact [[Management|the Management]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]

* For changing settings on the TP-Link WDR4900, please contact [[Management|the Management]] or [[User:Olaf|Olaf]]

Network

2018-06-10T20:44:31Z

Olaf: /* Internal Network */

Network

2018-06-10T20:42:41Z

Olaf: /* Internal Network */

The network at the Comakingspace is built up as follows:

Internet ---> 1&1 Router --->Netgear WNDR3700v4 ([[Freifunk]]) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

=== Internet Connection ===
In order to connect to the Internet, you can use SSID freifunk-rhein-neckar.de

=== Internal Network ===
In order to connect to the Internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The Key can be found at the space.
DHCP is configures as follows:
{| class = "wikitable"
|-
! IP !! Host
|-
|192.168.1.1 || TP-Link WDR4900
|-
|192.168.1.2 || Raspberry Pi (next to the Music)
|-
|192.168.1.3 || Lasertjet Printer
|-
|192.168.1.4 - 192.168.1.99 || Open for further static services
|-
|192.168.1.100 - 192.168.1.250 || IPs assigned by DHCP
|-
|192.168.1.255 || Broadcast address
|}

Within the internal network, the following services are provided:
{| class="wikitable"
|-
! Service !! Host-IP !! Hostname !! Port
|-
| Mopidy (MPD Daemon) || 192.168.1.2 || comakingcontroller || 6600
|-
| Mopidy (Webinterface) || 192.168.1.2 || comakingcontroller || 8888
|-
| SSH || 192.168.1.2 || comakingcontroller || 22
|-
| Printing || 192.168.1.3 || ??? || ???
|}

The static IPs will be assigned by the TP-Link WDR4900. If you want to add a service with a static IP please ask one of the network administrators to add your service and don't just grep a static IP.

=== Configuration Changes ===

* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact [[Management|the Management]]

* For changing settings on the Raspberry pi, please contact [[Management|the Management]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]

Network

2018-06-10T20:35:22Z

Olaf: /* Internal Network */

The network at the Comakingspace is built up as follows:

Internet ---> 1&1 Router --->Netgear WNDR3700v4 ([[Freifunk]]) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

=== Internet Connection ===
In order to connect to the Internet, you can use SSID freifunk-rhein-neckar.de

=== Internal Network ===
In order to connect to the Internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The Key can be found at the space.
DHCP is configures as follows:
{| class = "wikitable"
|-
! IP !! Host
|-
|192.168.1.1 || TP-Link WDR4900
|-
|192.168.1.2 || Raspberry Pi (next to the Music)
|-
|192.168.1.3 || Lasertjet Printer
|-
|192.168.1.4 - 192.168.1.99 || Open for further static services
|-
|192.168.1.100 - 192.168.1.250 || IPs assigned by DHCP
|-
|192.168.1.255 || Broadcast address
|}

Within the internal network, the following services are provided:
{| class="wikitable"
|-
! Service !! Host-IP !! Hostname !! Port
|-
| Mopidy (MPD Daemon) || 192.168.1.2 || comakingcontroller || 6600
|-
| Mopidy (Webinterface) || 192.168.1.2 || comakingcontroller || 8888
|-
| SSH || 192.168.1.2 || comakingcontroller || 22
|-
| Printing || 192.168.1.3 || ??? || ???
|}

=== Configuration Changes ===

* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact [[Management|the Management]]

* For changing settings on the Raspberry pi, please contact [[Management|the Management]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]

User:Olaf

2018-06-10T20:34:19Z

Olaf: Created page with "I am Olaf."

I am Olaf.

Wish List

2018-05-30T23:54:24Z

Olaf: /* e.Room */

A list of gadgets we would like to use in the near future. If you have additional ideas, please add them!

A good way to make sure something can actually be purchased is to create a page for that item and link it to the entry in this list. That way, we can keep the list neat while accumulating enough knowledge and specific suggestions to make an informed decision what to spend money on. Pages for equipment we don't have yet are in the [[Special:AllPages/Wanted:|"Wanted" namespace]].

Do you happen to know a good source for any of these items, or want to get rid of something yourself? Please let us know!

== Miscellaneous ==
* screen printing equipment (can be self-built)
* Makelangelo art robot (actually more of a project idea)
* 3D mouse, e.g. [http://www.3dconnexion.de/products/spacemouse.html SpaceMouse]
* glass/ceramic ring saw ([http://www.glass-fusing-made-easy.com/glass-ring-saw.html short review with funny video])
* whetstone(s)
* assortment of [[Material:Aluminum Extrusions|aluminum extrusions]]
* [https://www.wiha.com/de/produkte/drehmomentwerkzeuge/drehmoment-schraubendreher-set-torquevario-s-gemischt-13-tlg-variabel-einstellbare-drehmomentbegrenzung-in-box-26893.html variable torque screwdriver set]

== [[Woodworking]] ==
* higher-end [[Hole Saws|hole saws]] (or "Zapfen-/Scheibenschneider")
* pipe clamps (might be an American thing?)
* [[Wanted:Jointer|jointer]]/planer (combination machine)
* [[Wanted:Pocket Hole Jig|pocket hole jig]] (e.g. [https://www.planetahuerto.de/do-it-yourself/verbrauchsmaterial-zubehor/verbindungsschrauben/undercover-jig-set-wolfcraft_13007?gclid=CMGT06vJstACFeoK0wodWRAHqg this one] or [https://www.kregtool.com/store/c13/kreg-jigsreg/p362/kreg-jigreg-k5-master-system/ more elaborate system]; or self-built?)
* [https://www.amazon.de/Handschleifteller-verstellbarer-Handschlaufe-Klett-Schleifscheiben-125mm/dp/B00IUPGZWY sanding disc holder]
* [http://www.sawstop.com/support/product-comparison SawStop] table saw (2000 € or more, does not seem to be available in Europe...)
* [[Wanted:Disc Sander|disc sander]] (can be self-built from simple parts, perhaps utilizing the [[Wood Lathe|wood lathe]]?)
* band saw
* bigger/better [[Chop Saw|chop saw]]
* good quality [[router]] (strong enough for a [[Project:Router Table|router table]])

== [[Metalworking]] ==
* hand-held band saw
* welding screens/"curtains"
* second [[Welding Helmet|welding helmet]]
* leather apron
* smelting furnace (can be self-built, mainly need the gas burner)
* [[Taps and Dies|taps and dies]] for left-handed threads
* bigger/better drill press
** e.g. crank for height adjustment, higher pillar, deeper work area
* [http://www.flexarminc.com/index.html tap arm]

== [[e.Room]] ==
* programmable power supply (multi channel)
* digital function generator
* PCB holder
* PCB etching machine
* microscope for PCB inspection
* thermal imager
* coaxial cables
* banana cables
* coaxial to banana cables
* banana cable to beradbord connector

== [[CNC]] ==
* [[Wanted:Laser Cutter|laser cutter]]
** 4" lens for cutting thicker materials
** rotary attachment for engraving glasses, bottles etc.
* waterjet cutter, e.g. [https://www.wazer.com/pages/home/#buy-wazer Wazer] (also see [http://makezine.com/2016/09/13/wazer-desktop-waterjet-cutter/ Makezine article])
* CNC metalworking lathe
* [[CNC Router|CNC router]] accessories
** tool changer
** tool length sensor
** aluminum t-slot bed
** vacuum table
** eccentric nuts for fixing small workpieces to the CNC table
* [[Wanted:Filament Extruder|filament extruder]]

[[Category:3D Printing]]
[[Category:CNC]]
[[Category:Electronics]]
[[Category:Hardware]]
[[Category:Metalworking]]
[[Category:Woodworking]]

Wish List

2018-05-30T23:50:36Z

Olaf: /* e.Room */

A list of gadgets we would like to use in the near future. If you have additional ideas, please add them!

A good way to make sure something can actually be purchased is to create a page for that item and link it to the entry in this list. That way, we can keep the list neat while accumulating enough knowledge and specific suggestions to make an informed decision what to spend money on. Pages for equipment we don't have yet are in the [[Special:AllPages/Wanted:|"Wanted" namespace]].

Do you happen to know a good source for any of these items, or want to get rid of something yourself? Please let us know!

== Miscellaneous ==
* screen printing equipment (can be self-built)
* Makelangelo art robot (actually more of a project idea)
* 3D mouse, e.g. [http://www.3dconnexion.de/products/spacemouse.html SpaceMouse]
* glass/ceramic ring saw ([http://www.glass-fusing-made-easy.com/glass-ring-saw.html short review with funny video])
* whetstone(s)
* assortment of [[Material:Aluminum Extrusions|aluminum extrusions]]
* [https://www.wiha.com/de/produkte/drehmomentwerkzeuge/drehmoment-schraubendreher-set-torquevario-s-gemischt-13-tlg-variabel-einstellbare-drehmomentbegrenzung-in-box-26893.html variable torque screwdriver set]

== [[Woodworking]] ==
* higher-end [[Hole Saws|hole saws]] (or "Zapfen-/Scheibenschneider")
* pipe clamps (might be an American thing?)
* [[Wanted:Jointer|jointer]]/planer (combination machine)
* [[Wanted:Pocket Hole Jig|pocket hole jig]] (e.g. [https://www.planetahuerto.de/do-it-yourself/verbrauchsmaterial-zubehor/verbindungsschrauben/undercover-jig-set-wolfcraft_13007?gclid=CMGT06vJstACFeoK0wodWRAHqg this one] or [https://www.kregtool.com/store/c13/kreg-jigsreg/p362/kreg-jigreg-k5-master-system/ more elaborate system]; or self-built?)
* [https://www.amazon.de/Handschleifteller-verstellbarer-Handschlaufe-Klett-Schleifscheiben-125mm/dp/B00IUPGZWY sanding disc holder]
* [http://www.sawstop.com/support/product-comparison SawStop] table saw (2000 € or more, does not seem to be available in Europe...)
* [[Wanted:Disc Sander|disc sander]] (can be self-built from simple parts, perhaps utilizing the [[Wood Lathe|wood lathe]]?)
* band saw
* bigger/better [[Chop Saw|chop saw]]
* good quality [[router]] (strong enough for a [[Project:Router Table|router table]])

== [[Metalworking]] ==
* hand-held band saw
* welding screens/"curtains"
* second [[Welding Helmet|welding helmet]]
* leather apron
* smelting furnace (can be self-built, mainly need the gas burner)
* [[Taps and Dies|taps and dies]] for left-handed threads
* bigger/better drill press
** e.g. crank for height adjustment, higher pillar, deeper work area
* [http://www.flexarminc.com/index.html tap arm]

== [[e.Room]] ==
* programmable power supply (multi channel)
* digital function generator
* PCB holder
* PCB etching machine
* microscope for PCB inspection
* thermal imager
* coaxial cable + banana cable

== [[CNC]] ==
* [[Wanted:Laser Cutter|laser cutter]]
** 4" lens for cutting thicker materials
** rotary attachment for engraving glasses, bottles etc.
* waterjet cutter, e.g. [https://www.wazer.com/pages/home/#buy-wazer Wazer] (also see [http://makezine.com/2016/09/13/wazer-desktop-waterjet-cutter/ Makezine article])
* CNC metalworking lathe
* [[CNC Router|CNC router]] accessories
** tool changer
** tool length sensor
** aluminum t-slot bed
** vacuum table
** eccentric nuts for fixing small workpieces to the CNC table
* [[Wanted:Filament Extruder|filament extruder]]

[[Category:3D Printing]]
[[Category:CNC]]
[[Category:Electronics]]
[[Category:Hardware]]
[[Category:Metalworking]]
[[Category:Woodworking]]