CoMakingSpace Wiki - User Contributions [en]

User:Nibuzz

2025-11-13T11:09:30Z

Nibuzz: /* Recent Projects */

{{UserInfoBox|real_name=Nils|image=Profilbild 03 2023.jpg|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and tinkering in any kind of way.

== Ongoing Projects ==

* [[Project:MFT - workbench|MFT - workbench]]
* [[Project:Parallel guide for Festool|Parallel guide for Festool]]

== Finished Projects ==

* [[Project:Klask Boardgame|Klask Boardgame]]

User:Nibuzz

2025-11-13T10:52:08Z

Nibuzz: /* Recent Projects */

{{UserInfoBox|real_name=Nils|image=Profilbild 03 2023.jpg|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

== Recent Projects ==

* [[Project:MFT - workbench|MFT - workbench]]
* [[Project:Parallel guide for Festool|Parallel guide for Festool]]
* [[Project:Klask Boardgame|Klask Boardgame]]

Project:Klask Boardgame

2025-11-13T10:49:55Z

Nibuzz: /* Creation Steps / Process */

{{ProjectInfoBox
|project title={{PAGENAME}}
|image=project-default.png
|status=
|date=
|initiator=
|team=
|materials=
|tools=
|software=
|cost=
}}
==Idea==
Klask is a pretty nice game for two players (there is also a round 4 player design...if you design one I would be interested to build one to).

As a Technik-Teacher in secundary education I always wanted to build the Board-game "Klask" with my students. The first time I played the game was 2016 at the "Spiel" in Essen. For my university I had to make a full planing of a Teaching unit and so I want to share my design for future improvements and ideas how to make it better.

As a warning: This is quite a big project in terms of cost (aprox. 25€ per each game) and building time (aprox. 5-6 full 90min. units) in terms of school teaching. That is the reason why it is only possible to build with older students 9th or 10th grade, but along the way there is a lot to learn about woodworking, planing a work process and reading technical drawings.

==Creation Steps / Process==
I already have documented the process in a file so I will just upload that file: [...I still have to learn how to upload pdf files...as soon as I am able to do this I will]

Further Ideas to improve the design:

- instead of building the playing figures out of wood as I did, I would 3D print them, because the build process in itself is complicated enough. Here is a design on Thingiverse that is really promising: https://www.thingiverse.com/thing:6852019

- If you want you can laser-cut the frame of the game and just glue it in place like in this design: https://www.thingiverse.com/thing:2738523

- I also found these nice boxes to store the figures...I haven't tested if it fits my desgin, because my design may vary from the original board game in thickness of the plywood and the size of the cutouts is defiantly different: https://www.printables.com/model/452810-klask-accessory-box

Project:Klask Boardgame

2025-11-13T10:37:14Z

Nibuzz: Created page with "{{ProjectInfoBox |project title={{PAGENAME}} |image=project-default.png |status= |date= |initiator= |team= |materials= |tools= |software= |cost= }} ==Idea== Klask is a pretty nice game for two players (there is also a round 4 player design...if you design one I would be interested to build one to). As a Technik-Teacher in secundary education I always wanted to build the Board-game "Klask" with my students. The first time I played the game was 2016 at the "Spiel" in Ess..."

File:Ausführlicher Unterrichtsentwurf Fertigungsaufgabe Klask Nils Buchenau.pdf

2025-11-13T10:24:42Z

Nibuzz:

This is a planing for a teaching unit showing how to build the boardgame "Klask" in teaching the german school subject "Technik" in secundary education.

User:Nibuzz

2025-11-13T10:05:21Z

Nibuzz: /* Recent Projects */

{{UserInfoBox|real_name=Nils|image=Profilbild 03 2023.jpg|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

== Recent Projects ==
- [[Project:MFT - workbench|MFT - workbench]]

- [[Project:Parallel guide for Festool|Parallel guide for Festool]]

- Klask Boardgame

User:Nibuzz

2025-11-12T22:48:39Z

Nibuzz: /* Recent Projects */

{{UserInfoBox|real_name=Nils|image=Profilbild 03 2023.jpg|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

== Recent Projects ==
- [[Project:MFT - workbench|MFT - workbench]]

- [[Project:Parallel guide for Festool|Parallel guide for Festool]]

Project:Parallel guide for Festool

2025-11-12T22:47:47Z

Nibuzz: /* Creation Steps / Process */

{{ProjectInfoBox
|project title={{PAGENAME}}
|image=project-default.png
|status=
|date=
|initiator=
|team=
|materials=
|tools=
|software=
|cost=
}}
==Idea==
I want to build a Parallel guide for the Festool saw track. This guide can be used to cut large panels using a handsaw. Of course this is normally easier on the big "Formatkreissäge", but:

* if the Formatkreissäge is not working properly
* there is nobody in the space, so you can't use a table saw for security reasons
* the plate you want to cut is simply to big for the "Formatkreissäge"

...then you might want to use the parallel guide in combination with a handheld circular saw. The good thing about a parallel guide is that you can do repeated cuts with a handheld circular saw.

==Creation Steps / Process==
Pretty straight forward: Finding a T-Nut-rail in the space (17x11) - approximately 1m , Printing the files using PETG-Filament from thingiverse (Makita Parallel guide for 11x17 t-track: https://www.thingiverse.com/thing:6332022 and Knob - M8: https://www.thingiverse.com/thing:5913832), inserting a 8mm bolt

==== Work in Progress: ====
--> I still have to buy the right T-Nuts and attach them to the T-Nut-rail

==== Further Improvements: ====

* Attaching some kind of measuring tape would be ideal
* a longer rail would be good for wider cuts.

User:Nibuzz

2025-11-12T22:46:05Z

Nibuzz: /* Recent Projects */

{{UserInfoBox|real_name=Nils|image=Profilbild 03 2023.jpg|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

== Recent Projects ==
- [[Project:MFT - workbench|MFT - workbench]]

- Parallel guide for Festool

Project:Parallel guide for Festool

2025-11-12T22:43:59Z

Nibuzz: Created page with "{{ProjectInfoBox |project title={{PAGENAME}} |image=project-default.png |status= |date= |initiator= |team= |materials= |tools= |software= |cost= }} ==Idea== I want to build a Parallel guide for the Festool saw track. This guide can be used to cut large panels using a handsaw. Of course this is normally easier on the big "Formatkreissäge", but: * if the Formatkreissäge is not working properly * there is nobody in the space, so you can't use a table saw for security rea..."

{{ProjectInfoBox
|project title={{PAGENAME}}
|image=project-default.png
|status=
|date=
|initiator=
|team=
|materials=
|tools=
|software=
|cost=
}}
==Idea==
I want to build a Parallel guide for the Festool saw track. This guide can be used to cut large panels using a handsaw. Of course this is normally easier on the big "Formatkreissäge", but:

* if the Formatkreissäge is not working properly
* there is nobody in the space, so you can't use a table saw for security reasons
* the plate you want to cut is simply to big for the "Formatkreissäge"

...then you might want to use the parallel guide in combination with a handheld circular saw. The good thing about a parallel guide is that you can do repeated cuts with a handheld circular saw.

==Creation Steps / Process==
Pretty straight forward: Finding a T-Nut-rail in the space (17x11) - approximately 1m , Printing the files from thingiverse: [link] - I used PETG-Filament, inserting a 8mm bolt

==== Work in Progress: ====
--> I still have to buy the right T-Nuts and attach them to the T-Nut-rail

==== Further Improvements: ====

* Attaching some kind of measuring tape would be ideal
* a longer rail would be good for wider cuts.

User:Nibuzz

2025-11-12T22:25:24Z

Nibuzz: /* Recent Projects */

{{UserInfoBox|real_name=Nils|image=Profilbild 03 2023.jpg|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

== Recent Projects ==
- [[Project:MFT - workbench|MFT - workbench]]

- Parallel guide for

Project:MFT - workbench

2025-11-12T22:20:59Z

Nibuzz: I am building a small MFT - workbench

{{ProjectInfoBox
|project title={{PAGENAME}}
|image=project-default.png
|status=in the making
|date=
|initiator=Nibuzz
|team=
|materials=
|tools=
|software=
|cost=
}}
==Idea:==
I want to build a portable workbench. This workbench is for small projects at home, when I want to do some small cuts, holes or if I want to round some edges. The workbench should be possible to store away easily on the wall of my small garage.

It should hold:

- A small bench router that is height adjustable from the top (of course with a switch that is easily accessible

- A Wabeco drill- and router-press

- A Rail Hinge for my track saw

I also also want 20mm Bench-dog-holes to hold things in Place, for example a small vice and if I need a bigger one.

The Design of the workbench is based on this workbench from 3x3Custom by Tamar (https://www.youtube.com/watch?v=7Joj_Q3zZyA) and on the Multiwerkbank from "Holzwerken" (https://www.youtube.com/watch?v=Cepg2DAkKQE)

==Creation Steps / Process==

=== First Step: Drilling and routing the Benchdog-holes: ===

==== Using a 3D printed Template: ====
I started drilling holes for the Bench dogs. My learning was that the 3D-printed Template I used: [...link...] is not stiff enough. I should have estimated that, because I used PETG for durability because it is more flexible than PLA, but on the other hand it is not really stiff.

==== Using a lasercuted Template: ====
I plan on cutting a template on the laser-cutter so I have a bigger template that is easy to rout with a handheld router, while also being precise and reliable.

There are two ways to do this:

# Laser-cutting a template that has 20mm and using a router bit that has a bushing for a flushcut (this method is pretty easy, but has the downside that I would have to buy a flush-cut-bit since it is not available in the space)
# Laser-cutting a template that is bigger than the actual holes and using a copy ring. My handheld router has a copy ring that is 17mm wide. If I am using a 12mm bit, than i have to make the holes of the Template:
#* Offset=(17mm−12mm)/2 =2.5mm
#* Template hole diameter=desired finished hole diameter+2×offset
#* Template hole diameter = 20mm + 5mm = 25mm

Using a copy ring is a little bit more difficult, but has the upside of not being depended of the quality of the fushcut routerbit

==== Drilling out the holes: ====
It is relativly time consuming manualy routing out the holes. It is easier to drill out the holes using a drill with a portable drillpress. If you clamp a plate against the workbench top you don't risk that they "ausreißen".

==== Routing the Corners: ====
Of course the last step is routing out the corners of the Bench dog holes.

=== Second Step: Making the plate for the Router table: ===
I found a leftover 3mm stainless steel plate and a 3mm aluminum plate. I will have to find a way to turn them into a baseplate for my Router. I want to drill holes to fit both my routers and I want to 3D-Print Inlays for the Aluminum-Plate that attach to the stainless steel plate with magnets (of course the stainless steel is not magnetic so the magnets have to be glued under the stainless steel plate and into the 3D-Printed Inlays - similar to this guide: https://www.youtube.com/watch?v=UazUcLDqn_I.

=== Third Step: Making the Router table adjustable ===
I am using a very old Router, a Bosch POF 500 A that I got from my grandfather. It has a "Eurohalsaufnahme" so a "Spannhals" that is 43mm wide. Therefore I can use it in my portable drillpress (Wabeco) and as a router table in my bench top. The upside is that it is very light. The downside is that it has only 500W of power. Maybe I have to upgrade it with my big Router, a POF 1400 ACE, which is not really made to be used in a router table - I will see. Perfect would be a more powerful router with a 43mm "Spannhals" which is typical for the really powerful brands like Suhner, AMB or Mafell (like the one we have in our CNC-router).

My Bosch POF 500 A - comes with a base for using it as a handheld router. fortunatly this base is very easy to be converted in a router table with acsessibility from the top. I simply follow this guide: https://www.youtube.com/watch?v=JyiN1QSlQrk

--> maybe I have to do something similar to my POF 1400 ACE if I find that this Router is not powerful enough --> I will test the small one before, because I want to keep my build as lightweight was possible.

=== Fourth Step: Routing out the hole for the Routertable ===
I plan to use the [link: Rectangle jig] to route out 6mm in depth. Then I cut out a hole in the middle.

=== Fifth Step: Making the Rail Hinge: ===
The Rail Hinge is the most important part of my build. I have been dreaming about a rail hinge for a long time and hope it keeps up with my big expectations. I have been seeing a rail hinge first in this video from "Holzwerken-TV": https://www.youtube.com/watch?v=Cepg2DAkKQE (Multiwerkbank) and in this very well build remix of the Multiwerkbank: https://www.youtube.com/watch?v=kapb_0U_DG0.

After seening this Video from 3x3Custom:Tamar, I knew I want to build something very similar: https://www.youtube.com/watch?v=7Joj_Q3zZyA.

I also found free designs for a 3D-printed Rail hinge (e.g. Thingiverse or makerworld ) and I want to give it a try although the print time is very long (10hrs.) and I don't know what to expect from a plastic-hinge. I have read many happy comments about 3D printing one of these and I can make a more durable one if necessary.

==Learnings==

Project:MFT - workbench

2025-11-12T21:40:50Z

Nibuzz: Created page with "{{ProjectInfoBox |project title={{PAGENAME}} |image=project-default.png |status=planned |date= |initiator=Nibuzz |team= |materials= |tools= |software= |cost= }} ==Idea:== I want to build a portable workbench. This workbench is for small projects at home, when I want to do some small cuts. The workbench should be possible to store away on the wall of my small garage. It should hold: - A small bench router that is hight ajustable from the top (of course with a switch tha..."

{{ProjectInfoBox
|project title={{PAGENAME}}
|image=project-default.png
|status=planned
|date=
|initiator=Nibuzz
|team=
|materials=
|tools=
|software=
|cost=
}}
==Idea:==
I want to build a portable workbench. This workbench is for small projects at home, when I want to do some small cuts. The workbench should be possible to store away on the wall of my small garage.

It should hold:

- A small bench router that is hight ajustable from the top (of course with a switch that is easily excessible

- A wabeco drill and router

- A Rail Hinge for my track saw

I also want 20mm Benchdog-holes to hold things in Place, for example a small vice and if I need a bigger one.

==Creation Steps / Process==

=== First Step: Drilling and routing the Benchdog-holes: ===

==== Using a 3D printed Template: ====
I started drilling holes for the Benchdogs. My learning was that the 3D-printed Template I used: [...link...] is not stiff enough. I should have estimated that, because I used PETG for duribility because it is more flexible than PLA, but on the other hand it is not realy stiff.

==== Using a lasercuted Template: ====
I plan on cutting a template on the lasercutter so I have a bigger template that is easy to rout with a handheld router, while also being precise and reliable.

There are two ways to do this:

# Lasercutting a template that has 20mm and using a router bit that has a bushing for a flushcut (this method is pretty easy, but has the downside that I would have to buy a flushcut-bit since it is not availiable in the space)
# Lasercutting a template that is bigger than the actual holes and using a copy ring. My handheld router has a copy ring that is 17mm wide. If I am using a 12mm bit, than i have to make the holes of the Template:
#* Offset=(17mm−12mm)/2 =2.5mm
#* Template hole diameter=desired finished hole diameter+2×offset
#* Template hole diameter = 20mm + 5mm = 25mm

Using a copy ring is a little bit more difficult, but has the upside of not being depended of the quality of the fushcut routerbit

==== Drilling out the holes: ====
It is relativly time consuming manualy routing out the holes. It is easier to drill out the holes using a drill with a portable drillpress. If you clamp a plate against the workbench top you don't risk that they "ausreißen".

==== Routing the Corners: ====
Of course the last step is routing out the corners of the Benchdog holes.

=== Second Step: Making the plate for the Routertable ===

=== Third Step: Making the Routertable adjustable ===
I am using a very old Router, a Bosch POF 500 A that I got from my grandfather. It has a

==Learnings==

User:Nibuzz

2025-11-12T20:56:55Z

Nibuzz: /* About me: */

{{UserInfoBox|real_name=Nils|image=Profilbild 03 2023.jpg|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

== Recent Projects ==
- Recycling Box for Seewing supplies

- Small MFT - workbench

-

Waiting Lists

2025-10-17T10:20:49Z

Nibuzz: /* Vertical Bandsaw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big><br>Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]
*[[User:Heiko|Heiko]]
*[[User:Nibuzz|Nibuzz]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]
*[[User:Heiko|Heiko]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*[[User:Lepus|Nidal]]
*Alexander B.

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:Ivastar|Ivastar]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]
*[[User:Hm.mane|Hm.mane]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]
*LeoF

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Ivastar|Ivastar]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]
*[[User:Nibuzz|Nils]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*LeoF
*Alexander B.[[Laser Cutter Introduction|Nibuzz]]
*[[User:Nibuzz|Nibuzz]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]
*LeoF
*[[User:Hm.mane|Hm.mane]]
*[[User:Nibuzz|Nibuzz]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]
*LeoF
*Tom

[[Category:Introductions]]

Waiting Lists

2025-10-17T10:18:28Z

Nibuzz: /* Metal Lathe Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big><br>Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]
*[[User:Heiko|Heiko]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]
*[[User:Heiko|Heiko]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*[[User:Lepus|Nidal]]
*Alexander B.

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:Ivastar|Ivastar]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]
*[[User:Hm.mane|Hm.mane]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]
*LeoF

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Ivastar|Ivastar]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]
*[[User:Nibuzz|Nils]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*LeoF
*Alexander B.

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]
*LeoF
*[[User:Hm.mane|Hm.mane]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]
*LeoF
*Tom

[[Category:Introductions]]

Nibuzz

2025-10-17T10:11:00Z

Nibuzz: created redirect for user page

#REDIRECT [[User:Nibuzz]]

User:Nibuzz

2023-04-03T20:11:49Z

Nibuzz:

{{UserInfoBox|real_name=Nils|image=[[file: Profilbild 03 2023.jpg | 200px]]|interests=woodworking, Recycling, Arduino}}

==About me:==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

== Recent Projects ==
- Recycling Box for Seewing supplies

- Bamboo vertical gardening tower

-

User:Nibuzz

2023-04-03T19:55:28Z

Nibuzz:

{{UserInfoBox
[[File:Profilbild 03 2023.jpg|thumb]]
}}
== About me: ==
Hi I‘m Nils.

As probably most of you, I am interested in Woodworking, Arduino, Recycling and thinkering in any kind of way.

File:Profilbild 03 2023.jpg

2023-04-03T19:51:39Z

Nibuzz:

Ein Foto von mir.

Waiting Lists

2023-01-20T09:28:59Z

Nibuzz: /* Laser Cutter Introduction */

User:Nibuzz

2023-01-19T22:32:48Z

Nibuzz:

User:Nibuzz

2022-12-07T10:09:46Z

Nibuzz: create user page