CoMakingSpace Wiki - User Contributions [en]

Project:Airqualitysensor

2021-12-31T22:19:32Z

Narquadah: Created page with "TBD"

TBD

Jointer-Planer Introduction/Waiting

2020-12-07T07:55:34Z

Narquadah:

{{Waiting Page
|IntroLink=[[Jointer-Planer Introduction|jointer-planer introduction]]
|slots=2-3
|next=after the machine has been [[commissioned]]
}}
* [[luzian]]
* [[johannes]]
* [[eileen]]
* [[User:Blacksheep|Micha]]
* [[User:Karel|Karel]]
* [[User:Christoph|Christoph]]
* [[User:Gregor|Gregor]]
* [[User:Keno|Keno]]
* {{K}}

Anmeldesystem

2020-12-01T15:18:54Z

Narquadah: /* KW 49 (30. November - 6. Dezember) */

WICHTIG: Im '''November 2020''' ist der Aufenthalt im Space, auch mit [[Hygienekonzept]], nur für maximal zwei Haushalte gleichzeitig möglich! Eine Mail dazu solltet ihr am Morgen des 2. November bekommen haben.

Zur Anmeldung haben wir uns diese Regeln überlegt, um diese Einschränkung möglichst fair zu gestalten:
* die Rahmenzeiten sind verbindlich - bitte weder überziehen noch "ins Blaue" blocken und dann erst viel später auftauchen!
* immer nur eine zukünftige Reservierung pro Person: also den nächsten Tag erst eintragen, wenn der aktuell reservierte angebrochen ist * möglichst mit einem Tag Vorlauf eintragen! So können wir Missverständnisse/Doppelbuchungen noch rechtzeitig bemerken
* '''sollte ein Schlüsselzugang entgegen dieser Regeln ohne Voranmeldung genutzt werden, müssen wir ihn leider ohne weitere Verwarnung bis zum Ende des Monats sperren'''

[[Management|Meldet euch]] gerne mit allen Fragen und Verbesserungsvorschlägen! Der Austausch mit anderen findet diesen Winter am besten von zuhause aus statt: schaut doch mal im [https://whereby.com/comakingspace whereby-Videochat] oder unseren anderen [[Community]]-Ressourcen vorbei :-)

== KW 49 (30. November - 6. Dezember) ==
* Montag
** [[User:Simon|Simon]] 15:00 - 16:00
** {{P}} 17:30 - 21:00

* Dienstag
** [[User:Gregor|Gregor]] 12:30 - 15:30

* Mittwoch
**[[User:Mfisch3r|Markus]] & [[User:St3ffi|Steffi]] 18:30 - 21:30

* Donnerstag

* Freitag
**[[User:Keno|Keno]] 19:00-02:00
**[[User:Lukas|Lukas]] 19:00-02:00

* Samstag

* Sonntag

== KW 50 (7. - 13. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 51 (14. - 20. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 52 (21. - 27. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 1 (28. Dezember - 3. Januar '21) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

Anmeldesystem

2020-12-01T13:34:48Z

Narquadah: /* KW 49 (30. November - 6. Dezember) */

WICHTIG: Im '''November 2020''' ist der Aufenthalt im Space, auch mit [[Hygienekonzept]], nur für maximal zwei Haushalte gleichzeitig möglich! Eine Mail dazu solltet ihr am Morgen des 2. November bekommen haben.

Zur Anmeldung haben wir uns diese Regeln überlegt, um diese Einschränkung möglichst fair zu gestalten:
* die Rahmenzeiten sind verbindlich - bitte weder überziehen noch "ins Blaue" blocken und dann erst viel später auftauchen!
* immer nur eine zukünftige Reservierung pro Person: also den nächsten Tag erst eintragen, wenn der aktuell reservierte angebrochen ist * möglichst mit einem Tag Vorlauf eintragen! So können wir Missverständnisse/Doppelbuchungen noch rechtzeitig bemerken
* '''sollte ein Schlüsselzugang entgegen dieser Regeln ohne Voranmeldung genutzt werden, müssen wir ihn leider ohne weitere Verwarnung bis zum Ende des Monats sperren'''

[[Management|Meldet euch]] gerne mit allen Fragen und Verbesserungsvorschlägen! Der Austausch mit anderen findet diesen Winter am besten von zuhause aus statt: schaut doch mal im [https://whereby.com/comakingspace whereby-Videochat] oder unseren anderen [[Community]]-Ressourcen vorbei :-)

== KW 49 (30. November - 6. Dezember) ==
* Montag
** [[User:Simon|Simon]] 15:00 - 16:00
** {{P}} 17:30 - 21:00

* Dienstag
** [[User:Gregor|Gregor]] 12:30 - 15:30
** {{K}} 18:30 - 18:45
** [[User:Lars|Lars]] 18:30 - 18:45
* Mittwoch
**[[User:Mfisch3r|Markus]] & [[User:St3ffi|Steffi]] 18:30 - 21:30

* Donnerstag

* Freitag
**[[User:Keno|Keno]] 19:00-02:00
**[[User:Lukas|Lukas]] 19:00-02:00

* Samstag

* Sonntag

== KW 50 (7. - 13. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 51 (14. - 20. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 52 (21. - 27. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 1 (28. Dezember - 3. Januar '21) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

Blender Seminar

2020-05-30T21:03:30Z

Narquadah:

[[File:BlenderStartup.jpg|thumb|startup]]

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!
10 slots available

* {{k}}
* ''Your name could be here''

== Preparation ==
# Download the latest Blender version: [https://www.blender.org/download/ blender.org/download/]
# If you decide to launch it before the seminar, please make sure to keep the default settings except for "Spacebar": change it to Tools as shown in the image.
# Download reference image from github [https://github.com/comakingspace/Seminars/blob/master/Blender/Mug-reference%20.png github.com/comakingspace/Seminars/blob/master/Blender/Mug-reference%20.png]

== Dates ==
*2nd of May 2020
*7th of July 2020

[[Category:Design]][[Category:Seminars]]

Blender Seminar

2020-05-30T21:02:55Z

Narquadah:

[[File:BlenderStartup.jpg|thumb|startup]]

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!
10 slots available

* {{k}}

== Preparation ==
# Download the latest Blender version: [https://www.blender.org/download/ blender.org/download/]
# If you decide to launch it before the seminar, please make sure to keep the default settings except for "Spacebar": change it to Tools as shown in the image.
# Download reference image from github [https://github.com/comakingspace/Seminars/blob/master/Blender/Mug-reference%20.png github.com/comakingspace/Seminars/blob/master/Blender/Mug-reference%20.png]

== Dates ==
*2nd of May 2020
*7th of July 2020

[[Category:Design]][[Category:Seminars]]

3D Printers

2019-11-06T19:09:52Z

Narquadah: /* Available Printers */

[[File:Printer-farm.jpg|350px|thumb|right|Our 3D printer farm]]
'''This article is mandatory reading for anyone who would like to 3D print, but it does not replace a personal introduction!'''

All of our printers use "fused filament fabrication" (FFF, a.k.a. FDM) and are therefore limited to thermoplastics as [[3D Printing Materials|materials]]. Lots of cool things can be made with this technology, but it's good to be aware of the [[:Category:3D Printing#Fused Filament Fabrication|limits of FFF]] before starting to design your parts.

You can find our 3D printer farm in the [[Electronics Room|electronics room]].

== Available Printers ==
The Prusa 3D Printers P1 to P6 are on long term loan to the CoMakingSpace from our support partners Course Resource UG and the University of Heidelberg. P1 to P4 were built by participants of the euVENTION Summer School 2017 as part of the training programme provided by Course Resource UG and the University of Heidelberg. P5 and P6 are additional Course Resource UG training printers that are also made available to the CoMakingSpace members. Briefly, at euVENTION 2019, some of the printers returned to their role of supporting the Summer School participants in their rapid prototyping needs. However, now all six printers are again back at the CoMakingSpace available for our members use.

{| class="wikitable"
!label
!type
!status
!magnetic bed
|-
|P1
|[[Prusa i3 MK2S]]
|operational
|Yes
|-
|P2
|[[Prusa i3 MK2S]]
|operational
|No
|-
|P3
|[[Prusa i3 MK2S]]
|operational
|No
|-
|P4
|[[Prusa i3 MK2S]]
|operational
|No
|-
|P5
|[[Prusa i3 MK2S]]
|operational
|No
|-
| P6
| [[Prusa i3 Mk2S MM]]
| [https://github.com/comakingspace/do-something/projects/2 WIP]
|No
|}

== General Usage Guidelines ==

'''Using the 3D printers, like any other [[machine]], requires a personal [[3D Printer Introduction|introduction]] - ask a [[tutor]] to get one!'''

=== Slicing ===
A 3D model has to be virtually split into its layers ("[[:Category:Slicers|sliced]]") before a printer can start building it up layer by layer in reality. You can use [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition] with the default settings for the MK2S (or MK2, doesn't matter) provided by Prusa Research.

The slicing for our printers is done on the computer in the [[Electronics Room]] using [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition].

'''Import'''

Put your [[STL]] file on a thumb drive and plug it into the slicer computer. Open Slic3r (orange/grey on the side bar) and drag the file into the program.

'''Print Settings'''

Presets can be selected on the "Plater" tab (where you see your model) on the left side. Its a good idea to chose the setting which fits your desired quality the most and make adjustments from there. Individual options can be changed in the "Print Settings" tab (e.g. support, infill, ...).

'''Filament Settings'''

All the available filament rolls should have a preset created for them, which can be selected in the "Plater" tab. If this on not the case ask a [[tutor]] for the settings.

''' Export G-Code '''

Press the "Export G-Code" button and save the file on the SD card of the printer. It's good practice to save your print files in a folder with your name.

''' Multi Material Printing '''

If your model requires [[Multi-Material Printing|multi-material printing]], this can be done using printer P6.

=== Do Your Math ===
A few simple calculations will save you a lot of time and material:
* shell thickness must be a multiple of the nozzle diameter
* elements very close to or below the nozzle diameter won't turn out well
* bottom/top thickness must be a multiple of your selected layer height

=== Supervision ===
* even simple prints can go wrong, so please watch the homing process and the first layer closely and check the progress regularly
* do not leave the printers unattended - you'll have to find someone else to supervise a print if you absolutely need to leave the building
* there is no need to sit in front of the machine all the time, just '''do not leave the Space!'''

=== Cleanliness ===
* for improved adhesion, remove any dust from the print bed and wipe it with a few drops of [[isopropanol]]
** do '''not''' use [[acetone]] on the PEI sheet, it will destroy the print bed!
* collect any clean plastic waste in the appropriate (material and color!)

=== SD Cards ===
* if you don't know a file, don't print it - ideally, slice all your models just before printing

=== File Storage ===
* always back up your files on your own storage, our SDs and computers might be cleaned up at any time without much warning!
* do not use old [[Format:G-code|G-codes]] over and over again, but rather save your [[STL]]s and slice freshly for every print - there could have been changes to the machine since your last visit!

=== Material Donations ===
We try to keep the cost low to allow anyone to print. Apart from the [[filament]], we need new isopropanol from time to time.

Please [[Donation Boxes|donate]] for these expenses:
* 5 ct/gram material cost
* + any additional amount you like

=== Time/Material Estimation ===
To check the amount of filament and the rough time needed for a print we suggest to use the [http://gcode.ws gcode.ws online tool] and analyse the exported [[G-Code]] file there. The filament amount is usually quite accurate, but the print time in reality is usually 20-30% longer on our printers.

Some [[slicers]] also have built-in estimation features - unfortunately, our favorite [[Slic3r]] only estimates the required material, not the time.

== Tutors ==
If you're not sure about something, these Makers might be able to help:
* [[User:Pakue|Patrick]]
* [[User:Mitja|Mitja]]
* [[User:Lukas|Lukas]]
* [[User:Ciaran|Ciaran]]
* [[User:lmnl99|Luca]]
* [[User:Johannes|Johannes]]
* {{K}}

== Maintenance ==

Prusa Research provides a [https://www.prusaprinters.org/top-6-tips-original-prusa-i3-3d-printer-maintenance/ list of maintenance tips].

[[Category:3D Printing]]
[[Category:Facilities]]
[[Category:Hardware]]

3D Printers

2019-11-06T19:05:12Z

Narquadah:

[[File:Printer-farm.jpg|350px|thumb|right|Our 3D printer farm]]
'''This article is mandatory reading for anyone who would like to 3D print, but it does not replace a personal introduction!'''

All of our printers use "fused filament fabrication" (FFF, a.k.a. FDM) and are therefore limited to thermoplastics as [[3D Printing Materials|materials]]. Lots of cool things can be made with this technology, but it's good to be aware of the [[:Category:3D Printing#Fused Filament Fabrication|limits of FFF]] before starting to design your parts.

You can find our 3D printer farm in the [[Electronics Room|electronics room]].

== Available Printers ==
The Prusa 3D Printers P1 to P6 are on long term loan to the CoMakingSpace from our support partners Course Resource UG and the University of Heidelberg. P1 to P4 were built by participants of the euVENTION Summer School 2017 as part of the training programme provided by Course Resource UG and the University of Heidelberg. P5 and P6 are additional Course Resource UG training printers that are also made available to the CoMakingSpace members. Briefly, at euVENTION 2019, some of the printers returned to their role of supporting the Summer School participants in their rapid prototyping needs. However, now all six printers are again back at the CoMakingSpace available for our members use.

{| class="wikitable"
!label
!type
!status
|-
|P1
|[[Prusa i3 MK2S]]
|operational (has magnetic bed)
|-
|P2
|[[Prusa i3 MK2S]]
|operational
|-
|P3
|[[Prusa i3 MK2S]]
|operational
|-
|P4
|[[Prusa i3 MK2S]]
|operational
|-
|P5
|[[Prusa i3 MK2S]]
|operational
|-
| P6
| [[Prusa i3 Mk2S MM]]
| [https://github.com/comakingspace/do-something/projects/2 WIP]
|}

== General Usage Guidelines ==

'''Using the 3D printers, like any other [[machine]], requires a personal [[3D Printer Introduction|introduction]] - ask a [[tutor]] to get one!'''

=== Slicing ===
A 3D model has to be virtually split into its layers ("[[:Category:Slicers|sliced]]") before a printer can start building it up layer by layer in reality. You can use [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition] with the default settings for the MK2S (or MK2, doesn't matter) provided by Prusa Research.

The slicing for our printers is done on the computer in the [[Electronics Room]] using [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition].

'''Import'''

Put your [[STL]] file on a thumb drive and plug it into the slicer computer. Open Slic3r (orange/grey on the side bar) and drag the file into the program.

'''Print Settings'''

Presets can be selected on the "Plater" tab (where you see your model) on the left side. Its a good idea to chose the setting which fits your desired quality the most and make adjustments from there. Individual options can be changed in the "Print Settings" tab (e.g. support, infill, ...).

'''Filament Settings'''

All the available filament rolls should have a preset created for them, which can be selected in the "Plater" tab. If this on not the case ask a [[tutor]] for the settings.

''' Export G-Code '''

Press the "Export G-Code" button and save the file on the SD card of the printer. It's good practice to save your print files in a folder with your name.

''' Multi Material Printing '''

If your model requires [[Multi-Material Printing|multi-material printing]], this can be done using printer P6.

=== Do Your Math ===
A few simple calculations will save you a lot of time and material:
* shell thickness must be a multiple of the nozzle diameter
* elements very close to or below the nozzle diameter won't turn out well
* bottom/top thickness must be a multiple of your selected layer height

=== Supervision ===
* even simple prints can go wrong, so please watch the homing process and the first layer closely and check the progress regularly
* do not leave the printers unattended - you'll have to find someone else to supervise a print if you absolutely need to leave the building
* there is no need to sit in front of the machine all the time, just '''do not leave the Space!'''

=== Cleanliness ===
* for improved adhesion, remove any dust from the print bed and wipe it with a few drops of [[isopropanol]]
** do '''not''' use [[acetone]] on the PEI sheet, it will destroy the print bed!
* collect any clean plastic waste in the appropriate (material and color!)

=== SD Cards ===
* if you don't know a file, don't print it - ideally, slice all your models just before printing

=== File Storage ===
* always back up your files on your own storage, our SDs and computers might be cleaned up at any time without much warning!
* do not use old [[Format:G-code|G-codes]] over and over again, but rather save your [[STL]]s and slice freshly for every print - there could have been changes to the machine since your last visit!

=== Material Donations ===
We try to keep the cost low to allow anyone to print. Apart from the [[filament]], we need new isopropanol from time to time.

Please [[Donation Boxes|donate]] for these expenses:
* 5 ct/gram material cost
* + any additional amount you like

=== Time/Material Estimation ===
To check the amount of filament and the rough time needed for a print we suggest to use the [http://gcode.ws gcode.ws online tool] and analyse the exported [[G-Code]] file there. The filament amount is usually quite accurate, but the print time in reality is usually 20-30% longer on our printers.

Some [[slicers]] also have built-in estimation features - unfortunately, our favorite [[Slic3r]] only estimates the required material, not the time.

== Tutors ==
If you're not sure about something, these Makers might be able to help:
* [[User:Pakue|Patrick]]
* [[User:Mitja|Mitja]]
* [[User:Lukas|Lukas]]
* [[User:Ciaran|Ciaran]]
* [[User:lmnl99|Luca]]
* [[User:Johannes|Johannes]]
* {{K}}

== Maintenance ==

Prusa Research provides a [https://www.prusaprinters.org/top-6-tips-original-prusa-i3-3d-printer-maintenance/ list of maintenance tips].

[[Category:3D Printing]]
[[Category:Facilities]]
[[Category:Hardware]]

3D Printers

2019-11-06T19:02:56Z

Narquadah:

[[File:Printer-farm.jpg|350px|thumb|right|Our 3D printer farm]]
'''This article is mandatory reading for anyone who would like to 3D print, but it does not replace a personal introduction!'''

All of our printers use "fused filament fabrication" (FFF, a.k.a. FDM) and are therefore limited to thermoplastics as [[3D Printing Materials|materials]]. Lots of cool things can be made with this technology, but it's good to be aware of the [[:Category:3D Printing#Fused Filament Fabrication|limits of FFF]] before starting to design your parts.

You can find our 3D printer farm in the [[Electronics Room|electronics room]].

== Available Printers ==
The Prusa 3D Printers P1 to P6 are on long term loan to the CoMakingSpace from our support partners Course Resource UG and the University of Heidelberg. P1 to P4 were built by participants of the euVENTION Summer School 2017 as part of the training programme provided by Course Resource UG and the University of Heidelberg. P5 and P6 are additional Course Resource UG training printers that are also made available to the CoMakingSpace members. Briefly, at euVENTION 2019, some of the printers returned to their role of supporting the Summer School participants in their rapid prototyping needs. However, now all six printers are again back at the CoMakingSpace available for our members use.

{| class="wikitable"
!label
!type
!status
|-
|P1
|[[Prusa i3 MK2S]]
|operational (has magnetic bed)
|-
|P2
|[[Prusa i3 MK2S]]
|operational
|-
|P3
|[[Prusa i3 MK2S]]
|operational
|-
|P4
|[[Prusa i3 MK2S]]
|operational
|-
|P5
|[[Prusa i3 MK2S]]
|operational
|-
| P6
| [[Prusa i3 Mk2S MM]]
| [https://github.com/comakingspace/do-something/projects/2 WIP]
|}

== General Usage Guidelines ==

'''Using the 3D printers, like any other [[machine]], requires a personal [[3D Printer Introduction|introduction]] - ask a [[tutor]] to get one!'''

=== Slicing ===
A 3D model has to be virtually split into its layers ("[[:Category:Slicers|sliced]]") before a printer can start building it up layer by layer in reality. You can use [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition] with the default settings for the MK2S (or MK2, doesn't matter) provided by Prusa Research.

The slicing for our printers is done on the computer in the [[Electronics Room]] using [https://www.prusa3d.com/slic3r-prusa-edition/ Slic3r Prusa Edition].

'''Import'''

Put your [[STL]] file on a thumb drive and plug it into the slicer computer. Open Slic3r (orange/grey on the side bar) and drag the file into the program.

'''Print Settings'''

Presets can be selected on the "Plater" tab (where you see your model) on the left side. Its a good idea to chose the setting which fits your desired quality the most and make adjustments from there. Individual options can be changed in the "Print Settings" tab (e.g. support, infill, ...).

'''Filament Settings'''

All the available filament rolls should have a preset created for them, which can be selected in the "Plater" tab. If this on not the case ask a [[tutor]] for the settings.

''' Export G-Code '''

Press the "Export G-Code" button and save the file on the SD card of the printer. It's good practice to save your print files in a folder with your name.

''' Multi Material Printing '''

If your model requires [[Multi-Material Printing|multi-material printing]], this can be done using printer P6.

=== Do Your Math ===
A few simple calculations will save you a lot of time and material:
* shell thickness must be a multiple of the nozzle diameter
* elements very close to or below the nozzle diameter won't turn out well
* bottom/top thickness must be a multiple of your selected layer height

=== Supervision ===
* even simple prints can go wrong, so please watch the homing process and the first layer closely and check the progress regularly
* do not leave the printers unattended - you'll have to find someone else to supervise a print if you absolutely need to leave the building
* there is no need to sit in front of the machine all the time, just '''do not leave the Space!'''

=== Cleanliness ===
* for improved adhesion, remove any dust from the print bed and wipe it with a few drops of [[isopropanol]]
** do '''not''' use [[acetone]] on the PEI sheet, it will destroy the print bed!
* collect any clean plastic waste in the appropriate (material and color!)

=== SD Cards ===
* if you don't know a file, don't print it - ideally, slice all your models just before printing

=== File Storage ===
* always back up your files on your own storage, our SDs and computers might be cleaned up at any time without much warning!
* do not use old [[Format:G-code|G-codes]] over and over again, but rather save your [[STL]]s and slice freshly for every print - there could have been changes to the machine since your last visit!

=== Material Donations ===
We try to keep the cost low to allow anyone to print. Apart from the [[filament]], we need new isopropanol from time to time.

Please [[Donation Boxes|donate]] for these expenses:
* 5 ct/gram material cost
* + any additional amount you like

=== Time/Material Estimation ===
To check the amount of filament and the rough time needed for a print we suggest to use the [http://gcode.ws gcode.ws online tool] and analyse the exported [[G-Code]] file there. The filament amount is usually quite accurate, but the print time in reality is usually 20-30% longer on our printers.

Some [[slicers]] also have built-in estimation features - unfortunately, our favorite [[Slic3r]] only estimates the required material, not the time.

== Tutors ==
If you're not sure about something, these Makers might be able to help:
* [[User:Pakue|Patrick]]
* [[User:Mitja|Mitja]]
* [[User:Lukas|Lukas]]
* [[User:Ciaran|Ciaran]]
* [[User:lmnl99|Luca]]
* [[User:Johannes|Johannes]]

== Maintenance ==

Prusa Research provides a [https://www.prusaprinters.org/top-6-tips-original-prusa-i3-3d-printer-maintenance/ list of maintenance tips].

[[Category:3D Printing]]
[[Category:Facilities]]
[[Category:Hardware]]

Plenum/Meeting minutes/2019-11-01

2019-11-01T21:20:34Z

Narquadah: /* Area Patron Update */

= Head =
''Idea/Overview: [[Plenum]]''

Date/Time: 01.11.19 20:00 
Attending Managers: {{P}}, [[Lukas]], [[Mitja]] 
Attending Members: [[Martin]], [[Johannes]], [[Kim]], [[User:ErikSchatz|Erik]], [[Luzian]], [[User:Leo|Leo]], [[User:Jonah|Jonah]], [[User:PENTAPHIL|Philip]], [[User:PENTAPIA|Pia]], [[User:F.Huchinson|F.Huchinson]], [[User:Lmnl99|Luca]], Andreas J., [[User:WiNu|WiNu]] 

= Topics =
== New Space ==
As announced via E-Mail, the CoMakingSpace will move to a new location in January.
* 677m² "warehouse"
* Close to Henkel
* Public Transportation: close to Ochsenkopf and Pfaffengrund/Wieblingen
* Rental begins on November 1st

=== Layout ===
[[File:Layout Siemensstraße.jpeg|thumb]]
* A draft layout is available. It was made by [[Patrick]]. A more professional version will be made by [[User:Eileen|Eileen]].
* Each Room gets one or two supervisors assigned
** Will coordinate the detailed room layout
** Go-To person in case of questions
** In case of doubt: Can decide on the room layout
* E-Room: [[Johannes]] & [[Kim]]
* Common Room: [[Martin]] & {{HelpNeeded}}
* Workshop: {{HelpNeeded}}

The Common room will be a little bit larger.

Lukas showed the current layout for the workroom. As can bee seen here:
* Car "Spaces" for rending
Insert image HERE.

Johannes presented the eroom layout:
* Still missing is the table for all the 3D printers
* The smaller tables as workstations
Insert Image HERE.

Martin shows the common room layout:
* The escape route MUST remain free and unobstructed (yellow area)

V1
Insert Image HERE.

V2
* Has a kicker (therefore much superior to V1)
Insert Image HERE.

[[Luca]] has offered a couch that could be used in the new space.

 

=== Building plans ===
* We will have to build our own walls
** The Details can be found on [[Trockenbau]]
** Talk to [[Lukas]] if you have suggestions
* Helpers needed (see dudle later)
** Please have a look ;)
* Tools are needed (who has these at home?)
** Sackkarre von [[User:WiNu|WiNu]]
** [[User:F.Huchinson|F.Huchinson]] will check a different supplier for the dry walls for pricing

=== Movement Plan ===
* We have a rough budget plan:
** ~5500€
* We have a rough time plan:
** Moving at latest on Dec. 13
* Coordination during the building and movement phase: Tasks on a Kanban Board
* Please sign yourself up as a helper in [https://dudle.inf.tu-dresden.de/CoMS_neu/ our dudle].

== Project Presentations ==
skipped, due to planning of the new space

== Recap of the last plenum ==
skipped, due to planning of the new space
== New (and newly available) tools at the space ==

''=> also see "[[Wish List]]"''

== Collaboration possibilities ==
skipped, due to planning of the new space
Who's not in our [[Mailing List]] or [[Telegram Group]] yet? Also check out [[:Category:Community]]!

=== Do-something days ===
Please see the movement plan above.
=== [[Issues]] ===
skipped, due to planning of the new space

=== Wiki ===
skipped, due to planning of the new space
Please share your experiences with just about anything - the more people are [[Creating Wiki Content|creating wiki content]] together, the better! => have a look at [https://github.com/comakingspace/do-something/labels/wiki current "wiki" labeled issues] where help is especially welcome :-)

Also check out current projects that are [[:Category:Looking for Collaborators|looking for collaborators]] if you're a team player!

=== Area Patron Update ===
{| class="wikitable"
|-
!Area !! Patron !! Update !! Members Feedback
|-
|[[Electronics Bench]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[3D Printer Farm]] || [[User:Leo|Leo]] & [[Kim]] || P1 has now a magnetic bed || ''any feedback/thanks?''
|-
|[[Woodturning]] || [[User:Lukas|Lukas]] || Added a Roughing Thing || ''any feedback/thanks?''
|-
|[[CNC Router]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
| Kitchen ([[Fridge]] & [[Freezer]]) || [[Kim]] & [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Drilling Table]] || [[Keno]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Metal Lathe]] || [[User:Luzian|Luzian]] || ''any update?'' || ''any feedback/thanks?''
|}

Who else would like to become an [[Area Patron]] ''(Eckpate)''?

* wood workshop, e.g.:
** sanding corner
* Metal Workshop, e.g.:
*lathes
** grinding
** welding
** hand tools
** Precious Plastic

== [[Seminar Ideas]] ==
skipped, due to planning of the new space

== Open Discussion ==
skipped, due to planning of the new space
This is the place to talk about general improvements etc. - for example:

* What did I do since the last plenum?
* What am I planning to do until the next plenum?
* What went wrong?
* What went well?
* What should get done at the space (new issues)?

==Next Meeting ==

Plenum/Meeting minutes/2019-11-01

2019-11-01T21:18:26Z

Narquadah: /* Movement Plan */

= Head =
''Idea/Overview: [[Plenum]]''

Date/Time: 01.11.19 20:00 
Attending Managers: {{P}}, [[Lukas]], [[Mitja]] 
Attending Members: [[Martin]], [[Johannes]], [[Kim]], [[User:ErikSchatz|Erik]], [[Luzian]], [[User:Leo|Leo]], [[User:Jonah|Jonah]], [[User:PENTAPHIL|Philip]], [[User:PENTAPIA|Pia]], [[User:F.Huchinson|F.Huchinson]], [[User:Lmnl99|Luca]], Andreas J., [[User:WiNu|WiNu]] 

= Topics =
== New Space ==
As announced via E-Mail, the CoMakingSpace will move to a new location in January.
* 677m² "warehouse"
* Close to Henkel
* Public Transportation: close to Ochsenkopf and Pfaffengrund/Wieblingen
* Rental begins on November 1st

=== Layout ===
[[File:Layout Siemensstraße.jpeg|thumb]]
* A draft layout is available. It was made by [[Patrick]]. A more professional version will be made by [[User:Eileen|Eileen]].
* Each Room gets one or two supervisors assigned
** Will coordinate the detailed room layout
** Go-To person in case of questions
** In case of doubt: Can decide on the room layout
* E-Room: [[Johannes]] & [[Kim]]
* Common Room: [[Martin]] & {{HelpNeeded}}
* Workshop: {{HelpNeeded}}

The Common room will be a little bit larger.

Lukas showed the current layout for the workroom. As can bee seen here:
* Car "Spaces" for rending
Insert image HERE.

Johannes presented the eroom layout:
* Still missing is the table for all the 3D printers
* The smaller tables as workstations
Insert Image HERE.

Martin shows the common room layout:
* The escape route MUST remain free and unobstructed (yellow area)

V1
Insert Image HERE.

V2
* Has a kicker (therefore much superior to V1)
Insert Image HERE.

[[Luca]] has offered a couch that could be used in the new space.

 

=== Building plans ===
* We will have to build our own walls
** The Details can be found on [[Trockenbau]]
** Talk to [[Lukas]] if you have suggestions
* Helpers needed (see dudle later)
** Please have a look ;)
* Tools are needed (who has these at home?)
** Sackkarre von [[User:WiNu|WiNu]]
** [[User:F.Huchinson|F.Huchinson]] will check a different supplier for the dry walls for pricing

=== Movement Plan ===
* We have a rough budget plan:
** ~5500€
* We have a rough time plan:
** Moving at latest on Dec. 13
* Coordination during the building and movement phase: Tasks on a Kanban Board
* Please sign yourself up as a helper in [https://dudle.inf.tu-dresden.de/CoMS_neu/ our dudle].

== Project Presentations ==
skipped, due to planning of the new space

== Recap of the last plenum ==
skipped, due to planning of the new space
== New (and newly available) tools at the space ==

''=> also see "[[Wish List]]"''

== Collaboration possibilities ==
skipped, due to planning of the new space
Who's not in our [[Mailing List]] or [[Telegram Group]] yet? Also check out [[:Category:Community]]!

=== Do-something days ===
Please see the movement plan above.
=== [[Issues]] ===
skipped, due to planning of the new space

=== Wiki ===
skipped, due to planning of the new space
Please share your experiences with just about anything - the more people are [[Creating Wiki Content|creating wiki content]] together, the better! => have a look at [https://github.com/comakingspace/do-something/labels/wiki current "wiki" labeled issues] where help is especially welcome :-)

Also check out current projects that are [[:Category:Looking for Collaborators|looking for collaborators]] if you're a team player!

=== Area Patron Update ===
{| class="wikitable"
|-
!Area !! Patron !! Update !! Members Feedback
|-
|[[Electronics Bench]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[3D Printer Farm]] || [[User:Leo|Leo]] & [[Kim]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Woodturning]] || [[User:Lukas|Lukas]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[CNC Router]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
| Kitchen ([[Fridge]] & [[Freezer]]) || [[Kim]] & [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Drilling Table]] || [[Keno]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Metal Lathe]] || [[User:Luzian|Luzian]] || ''any update?'' || ''any feedback/thanks?''
|}

Who else would like to become an [[Area Patron]] ''(Eckpate)''?

* wood workshop, e.g.:
** sanding corner
* Metal Workshop, e.g.:
*lathes
** grinding
** welding
** hand tools
** Precious Plastic

== [[Seminar Ideas]] ==
skipped, due to planning of the new space

== Open Discussion ==
skipped, due to planning of the new space
This is the place to talk about general improvements etc. - for example:

* What did I do since the last plenum?
* What am I planning to do until the next plenum?
* What went wrong?
* What went well?
* What should get done at the space (new issues)?

==Next Meeting ==

Plenum/Meeting minutes/2019-11-01

2019-11-01T21:03:14Z

Narquadah: /* Building plans */

= Head =
''Idea/Overview: [[Plenum]]''

Date/Time: 01.11.19 20:00 
Attending Managers: {{P}}, [[Lukas]], [[Mitja]] 
Attending Members: [[Martin]], [[Johannes]], [[Kim]], [[User:ErikSchatz|Erik]], [[Luzian]], [[User:Leo|Leo]], [[User:Jonah|Jonah]], [[User:PENTAPHIL|Philip]], [[User:PENTAPIA|Pia]], [[User:F.Huchinson|F.Huchinson]], [[User:Lmnl99|Luca]], Andreas J., [[User:WiNu|WiNu]] 

= Topics =
== New Space ==
As announced via E-Mail, the CoMakingSpace will move to a new location in January.
* 677m² "warehouse"
* Close to Henkel
* Public Transportation: close to Ochsenkopf and Pfaffengrund/Wieblingen
* Rental begins on November 1st

=== Layout ===
[[File:Layout Siemensstraße.jpeg|thumb]]
* A draft layout is available. It was made by [[Patrick]]. A more professional version will be made by [[User:Eileen|Eileen]].
* Each Room gets one or two supervisors assigned
** Will coordinate the detailed room layout
** Go-To person in case of questions
** In case of doubt: Can decide on the room layout
* E-Room: [[Johannes]] & [[Kim]]
* Common Room: [[Martin]] & {{HelpNeeded}}
* Workshop: {{HelpNeeded}}

The Common room will be a little bit larger.

Lukas showed the current layout for the workroom. As can bee seen here:
* Car "Spaces" for rending
Insert image HERE.

Johannes presented the eroom layout:
* Still missing is the table for all the 3D printers
* The smaller tables as workstations
Insert Image HERE.

Martin shows the common room layout:
* The escape route MUST remain free and unobstructed (yellow area)

V1
Insert Image HERE.

V2
* Has a kicker (therefore much superior to V1)
Insert Image HERE.

[[Luca]] has offered a couch that could be used in the new space.

 

=== Building plans ===
* We will have to build our own walls
** The Details can be found on [[Trockenbau]]
** Talk to [[Lukas]] if you have suggestions
* Helpers needed (see dudle later)
** Please have a look ;)
* Tools are needed (who has these at home?)
** Sackkarre von [[User:WiNu|WiNu]]
** [[User:F.Huchinson|F.Huchinson]] will check a different supplier for the dry walls for pricing

=== Movement Plan ===
* We have a rough budget plan:
** Insert Budget here
* We have a rough time plan:
** Insert Time Plan here
* Coordination during the building and movement phase: Tasks on a Kanban Board
* Please sign yourself up as a helper in [https://dudle.inf.tu-dresden.de/CoMS_neu/ our dudle].

== Project Presentations ==
skipped, due to planning of the new space

== Recap of the last plenum ==
skipped, due to planning of the new space
== New (and newly available) tools at the space ==

''=> also see "[[Wish List]]"''

== Collaboration possibilities ==
skipped, due to planning of the new space
Who's not in our [[Mailing List]] or [[Telegram Group]] yet? Also check out [[:Category:Community]]!

=== Do-something days ===
Please see the movement plan above.
=== [[Issues]] ===
skipped, due to planning of the new space

=== Wiki ===
skipped, due to planning of the new space
Please share your experiences with just about anything - the more people are [[Creating Wiki Content|creating wiki content]] together, the better! => have a look at [https://github.com/comakingspace/do-something/labels/wiki current "wiki" labeled issues] where help is especially welcome :-)

Also check out current projects that are [[:Category:Looking for Collaborators|looking for collaborators]] if you're a team player!

=== Area Patron Update ===
{| class="wikitable"
|-
!Area !! Patron !! Update !! Members Feedback
|-
|[[Electronics Bench]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[3D Printer Farm]] || [[User:Leo|Leo]] & [[Kim]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Woodturning]] || [[User:Lukas|Lukas]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[CNC Router]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
| Kitchen ([[Fridge]] & [[Freezer]]) || [[Kim]] & [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Drilling Table]] || [[Keno]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Metal Lathe]] || [[User:Luzian|Luzian]] || ''any update?'' || ''any feedback/thanks?''
|}

Who else would like to become an [[Area Patron]] ''(Eckpate)''?

* wood workshop, e.g.:
** sanding corner
* Metal Workshop, e.g.:
*lathes
** grinding
** welding
** hand tools
** Precious Plastic

== [[Seminar Ideas]] ==
skipped, due to planning of the new space

== Open Discussion ==
skipped, due to planning of the new space
This is the place to talk about general improvements etc. - for example:

* What did I do since the last plenum?
* What am I planning to do until the next plenum?
* What went wrong?
* What went well?
* What should get done at the space (new issues)?

==Next Meeting ==

Plenum/Meeting minutes/2019-11-01

2019-11-01T20:28:24Z

Narquadah: /* Layout */

= Head =
''Idea/Overview: [[Plenum]]''

Date/Time: 01.11.19 20:00 
Attending Managers: {{P}}, [[Lukas]], [[Mitja]] 
Attending Members: [[Martin]], [[Johannes]], [[Kim]], [[User:ErikSchatz|Erik]], [[Luzian]], [[User:Leo|Leo]], [[User:Jonah|Jonah]], [[User:PENTAPHIL|Philip]], [[User:PENTAPIA|Pia]], [[User:F.Huchinson|F.Huchinson]], [[User:Lmnl99|Luca]], Andreas J., [[User:WiNu|WiNu]] 

= Topics =
== New Space ==
As announced via E-Mail, the CoMakingSpace will move to a new location in January.
* 677m² "warehouse"
* Close to Henkel
* Public Transportation: close to Ochsenkopf and Pfaffengrund/Wieblingen
* Rental begins on November 1st

=== Layout ===
[[File:Layout Siemensstraße.jpeg|thumb]]
* A draft layout is available. It was made by [[Patrick]]. A more professional version will be made by [[User:Eileen|Eileen]].
* Each Room gets one or two supervisors assigned
** Will coordinate the detailed room layout
** Go-To person in case of questions
** In case of doubt: Can decide on the room layout
* E-Room: [[Johannes]] & [[Kim]]
* Common Room: [[Martin]] & {{HelpNeeded}}
* Workshop: {{HelpNeeded}}

The Common room will be a little bit larger.

Lukas showed the current layout for the workroom. As can bee seen here:
* Car "Spaces" for rending
Insert image HERE.

Johannes presented the eroom layout:
* Still missing is the table for all the 3D printers
* The smaller tables as workstations
Insert Image HERE.

Martin shows the common room layout:
* The escape route MUST remain free and unobstructed (yellow area)

V1
Insert Image HERE.

V2
* Has a kicker (therefore much superior to V1)
Insert Image HERE.

[[Luca]] has offered a couch that could be used in the new space.

 

=== Building plans ===
* We will have to build our own walls
** The Details can be found on [[Trockenbau]]
* Helpers needed (see dudle later)
* Tools are needed (who has these at home?)
** Insert needed tools here

=== Movement Plan ===
* We have a rough budget plan:
** Insert Budget here
* We have a rough time plan:
** Insert Time Plan here
* Coordination during the building and movement phase: Tasks on a Kanban Board
* Please sign yourself up as a helper in [https://dudle.inf.tu-dresden.de/CoMS_neu/ our dudle].

== Project Presentations ==
skipped, due to planning of the new space

== Recap of the last plenum ==
skipped, due to planning of the new space
== New (and newly available) tools at the space ==

''=> also see "[[Wish List]]"''

== Collaboration possibilities ==
skipped, due to planning of the new space
Who's not in our [[Mailing List]] or [[Telegram Group]] yet? Also check out [[:Category:Community]]!

=== Do-something days ===
Please see the movement plan above.
=== [[Issues]] ===
skipped, due to planning of the new space

=== Wiki ===
skipped, due to planning of the new space
Please share your experiences with just about anything - the more people are [[Creating Wiki Content|creating wiki content]] together, the better! => have a look at [https://github.com/comakingspace/do-something/labels/wiki current "wiki" labeled issues] where help is especially welcome :-)

Also check out current projects that are [[:Category:Looking for Collaborators|looking for collaborators]] if you're a team player!

=== Area Patron Update ===
{| class="wikitable"
|-
!Area !! Patron !! Update !! Members Feedback
|-
|[[Electronics Bench]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[3D Printer Farm]] || [[User:Leo|Leo]] & [[Kim]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Woodturning]] || [[User:Lukas|Lukas]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[CNC Router]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
| Kitchen ([[Fridge]] & [[Freezer]]) || [[Kim]] & [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Drilling Table]] || [[Keno]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Metal Lathe]] || [[User:Luzian|Luzian]] || ''any update?'' || ''any feedback/thanks?''
|}

Who else would like to become an [[Area Patron]] ''(Eckpate)''?

* wood workshop, e.g.:
** sanding corner
* Metal Workshop, e.g.:
*lathes
** grinding
** welding
** hand tools
** Precious Plastic

== [[Seminar Ideas]] ==
skipped, due to planning of the new space

== Open Discussion ==
skipped, due to planning of the new space
This is the place to talk about general improvements etc. - for example:

* What did I do since the last plenum?
* What am I planning to do until the next plenum?
* What went wrong?
* What went well?
* What should get done at the space (new issues)?

==Next Meeting ==

Plenum/Meeting minutes/2019-06-05

2019-06-05T19:11:59Z

Narquadah: /* Head */

= Head =
''Idea/Overview: [[Plenum]]''

Date/Time: 05.06.2019 
Attending Managers: {{p}}, [[User:Mitja|Mitja]], [[User:Lukas|Lukas]] 
Attending Members: [[User:NitramLegov|Martin]], [[User:Keno|Keno]], [[User:LokowandtG|Georg]], [[User:Lars|Lars]], {{k}} 

= Topics =
Here's the list ''so far'' - please don't hesitate to add more! If you won't be able to attend, you can add your comments here or in the discussion to take part anyway :-)

== Project Presentations ==
Let's take about 2{{x}}20 minutes before each plenum to show others what we're working on! If you are interested in talking about your projects, please announce it here and/or via the [[Mailing List]]:

* Martin presented about his adventures in home-automation (HASS IO)
** He now can check his dryer while sitting on the toilet
** He can also now kill his plants remotely by checking on them via the web interface and still not water them
* ''<please add your idea(s)!>''

== Recap of the last plenum ==
* The Marketing Meetings were lacking participation. Is there any feedback why people did not attend?
** Only Ciaran and Martin attended the meetings and talked about the state of the website
** Website is needed to give interested people a brief overview about the Space
*** The wiki is too complex for new people
*** Many people think we are a mostly commercial entity which is not the case - the new website should reflect this better.
*** A site hosted on GitHub would allow more people to quickly edit (e.g. for a blog function)
*** Lars suggested to split the "design" and "content" parts to not get stuck in details
**** Martin showed the current state of the issues on the [https://github.com/comakingspace/comakingspace.github.io/issues issue tracker]
*** Lukas suggested to first copy-paste the old content and then edit it step-by-step
*** Lars offered to help next week Wednesday (19:00 for 1h) to find a good concept to work together on
** For future marketing meetings it would be better to give concrete/focused tasks
*** E.g. Let's [https://github.com/comakingspace/do-something/issues/113 design a poster for future Maker Faires]
*** This could also be labeled as "Do-something hours"

== New (and newly available) tools at the space ==
* Makita DDF484 Cordless Drill
** Thanks to [[User:Ed Green|Ed]] we have a [[Cordless Drills#Makita DDF484|new cordless drill]] (without batteries)
** {{P}} asked on the mailing list and on Telegram who would chime in to buy some batteries.
*** We collected some of the donations during the meeting and {{P}} has already bought the batteries and charger ahead of time
* [[User:Johannes|Johannes]] brought in a new Weber grill (kettle BBQ) as a loan.
* [[User:lmnl99|Luca]] loaned a soldering station.
* [[Lukas]] bought a set of [[Auger Bits|auger bits]]
* [[Martin]] bought two new [[Bandsaw Blades|bandsaw blades]]
* {{NL}} bought new sanding pads for the [[Oscillating Tool]]
* {{NL}} bought some noise reduction for the [[CNC Room]] (Let´s hope it works)
* [[Johannes]], [[Kim]] and {{NL}} bought and installed a new freezer! (Please respect the [[Freezer|freezer rules]])
* [[Lukas]] documented the [[Jigsaws#Bosch_PST_750_PE_.22EXPO2000.22| Bosch Jigsaw]] and got it out of commissioning
''=> also see "[[Wish List]]"''

== Collaboration possibilities ==
Who's not in our [[Mailing List]] or [[Telegram Group]] yet? Also check out [[:Category:Community]]!

=== Bahnstadtfest ===
* The [https://github.com/comakingspace/do-something/issues/110 Bahnstadtfest] is coming closer (July 20th)!
** Does anybody have a project they could show there?
** who else would like to help out during the day (at our stand or volunteering at food stands or Bahnstadtlauf)?
** Project idea: Engrave some coins (wood or metal) with visitors names and the CoMakingSpace logo
** Lukas asked about what language we should use for the issues. He suggested to use German as only people who can speak German are helping.

=== Do-something days ===
[[Johannes]] and [[Martin]] are planning to host a do-something day this weekend. {{P}} asked for it to be focused on clean-something. Who is willing to join?

=== Current projects that are [[:Category:Looking for Collaborators|looking for collaborators]] ===

=== [[Issues]] ===

[https://github.com/comakingspace/do-something/issues?utf8=%E2%9C%93&q=is%3Aissue+closed%3A2019-05-03..2019-06-05 closed issues since the last plenum] 
[https://github.com/comakingspace/do-something/issues?utf8=%E2%9C%93&q=is%3Aissue+created%3A2019-05-03..2019-06-05 new issues since the last plenum]

-> especially important:
* the upcoming [https://github.com/comakingspace/do-something/issues/125 KiCad Seminar needs PR support]
* be aware of potential safety risks with the [https://github.com/comakingspace/do-something/issues/120 router table footswitch]!

=== Wiki ===

=== Area Patron Update ===
{| class="wikitable"
|-
!Area !! Patron !! Update !! Members Feedback
|-
|[[Electronics Bench]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[3D Printer Farm]] || [[User:Lmnl99|Luca]] & [[Kim]] || ''Added new Prusa Slicer 2.0'' || ''any feedback/thanks?''
|-
|[[Woodturning]] || [[User:Lukas|Lukas]] || bought a new [[Skew Chisel|skew chisel]] together with [[User:LokowandtG|Georg]] and [[User:Lmnl99|Luca]] (still looking for people to throw in a few € for other tool upgrades); improved tailstock & toolrest base screws of the Güde lathe || ''any feedback/thanks?''
|-
|[[CNC Router]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Fridge]] || [[Kim]] || ''any update?'' || ''any feedback/thanks?''
|}

Who else would like to become an [[Area Patron]] ''(Eckpate)''? Areas in need:
* wood workshop, e.g.:
** [[Drilling Table|drilling table]]
** sanding corner
* Metal Workshop, e.g.:
** lathes
** grinding
** welding
** hand tools
** [[Precious Plastic]]

== [[Event Ideas]] ==
=== Maus-Türöffnertag ===
[[User:Lars|Lars]] brought up the idea of participating in the Maus-Türöffnertag via the [[Mailing List]]. We should discuss possible projects and a possible orga-team:

<blockquote>''I've been watching the german "Sendung mit der Maus" (kind-of "How-its-made" for kids) for the past 32ish years - especially since I got three forks of my own. Every year on October 3rd, there's the [https://www.wdrmaus.de/extras/tueren_auf.php5 Maus-Türöffnertag], where kids can register and come to do something exciting with (or without) their parents. I'd love to get the CoMakerspace into the program, which would also generate some publicity.

''We'd have to provide some projects for that, suitable for kids of a specific age range (e.g. 6-10 or 8-12). Ideas:
* ''Building small robots from a toothbrushhead, a battery and a vibration motor (age 6+)
* ''Bending and welding little robot figurines from thick wire, threaded rods, washers and nuts (bending for 6+, welding 10+ with assistance or only from helpers?)
* ''Soldering small kits like a mini-tesla-coil: https://www.ebay.de/itm/401634796641
* ''Sowing ugly animals (kids draw a fantasy animal, which is then cut and sown from leftover materials)
* ''Whatever you can think of

''Let's talk in the plenum on benefits, cost and risks - e.g. insurance? Is it possible to make the space semi-childsafe for the target group?</blockquote>

=== Coder Dojo ===
We got a request from Sonja of "CoderDojo":

<blockquote>''Hallo Leute im CoMakingSpace,

''ich heiße Sonja und suche Gleichgesinnte, die gerne hacken, in Makerspaces unterwegs sind und Lust haben, Kindern und Jugendlichen zu ermöglichen, mit Technik zu spielen. Ich gehöre zum Verein CoderDojo - wir sind Teil der Raspberry Pi Stiftung - und unser Ziel ist es, Kindern und Jugendlichen das aktive Gestalten mit Technik näher zu bringen, häufig gehört da auch zu, Programmieren zu lernen.

''In Deutschland gibt es grade um die 30 Klubs (wir nennen sie Dojos). Das ist natürlich nicht genug, um interessierte Kids zu unterstützen. Falls Du Lust hast, in Deiner Region, was auf die Beine zu stellen, gib mir einfach bescheid. Unser gemeinnütziger Verein ist ein weltweites Netzwerk aus Bastel- und Computerinteressierten. Wir tauschen uns untereinander aus und teilen Materialien.

''Mehr Info über CoderDojo findest Du [https://coderdojo.com/de-DE hier] und speziell über den deutschen e.V. [https://coderdojo-deutschland.de/ hier].</blockquote>

Would anyone be interested in organizing such events in our Space?

===Makers Flea Market===
Andi (not our Andi!) proposed a makers flea market in heidelberg in the whatsapp group, since he would have some stuff to sell. He also offered to organize some benches and tables in order to enable people to present their stuff.

We should discuss what would be needed for such an event, whether we want to host it and if yes, when.

=== Repair Café ===
We've had this idea floating around for a while but [https://www.facebook.com/repaircafeheidelberg/ Repair Café Heidelberg] already had a cooperation partner/host (Haus der Jugend) - now that changed and they asked us to cooperate with them for the quarterly event! Who's interested? At the minimum we need an experienced volunteer to supervise the Space, but ideally also motivated tinkerers who would like to help with the repairs and tell people about our Space and the joy of joining or donating ;-)

The last event at their old location was in the beginning of May, so we are probably looking at events in August and November this year.

== Open Discussion ==
This is the place to talk about general improvements etc. - for example:
* What did I do since the last plenum?
[[Johannes]] re-wired the door bell. It now has a switch which allows you to change back to the boring old bell in case the [[Project:Enhanced Door Bell|awesome new one]] breaks.

* What am I planning to do until the next plenum?
* What went wrong?
* What went well?
* What should get done at the space (new issues)?

==Next Meeting ==

Plenum/Meeting minutes/2019-06-05

2019-06-05T19:11:26Z

Narquadah: /* Head */

= Head =
''Idea/Overview: [[Plenum]]''

Date/Time: 05.06.2019 
Attending Managers: {{p}}, [[User:Mitja|Mitja]], [[User:Lukas|Lukas]] 
Attending Members: [[User:NitramLegov|Martin]], [[User:Keno|Keno]], [[User:LokowandtG|Georg]], {{k}} 

= Topics =
Here's the list ''so far'' - please don't hesitate to add more! If you won't be able to attend, you can add your comments here or in the discussion to take part anyway :-)

== Project Presentations ==
Let's take about 2{{x}}20 minutes before each plenum to show others what we're working on! If you are interested in talking about your projects, please announce it here and/or via the [[Mailing List]]:

* Martin presented about his adventures in home-automation (HASS IO)
** He now can check his dryer while sitting on the toilet
** He can also now kill his plants remotely by checking on them via the web interface and still not water them
* ''<please add your idea(s)!>''

== Recap of the last plenum ==
* The Marketing Meetings were lacking participation. Is there any feedback why people did not attend?
** Only Ciaran and Martin attended the meetings and talked about the state of the website
** Website is needed to give interested people a brief overview about the Space
*** The wiki is too complex for new people
*** Many people think we are a mostly commercial entity which is not the case - the new website should reflect this better.
*** A site hosted on GitHub would allow more people to quickly edit (e.g. for a blog function)
*** Lars suggested to split the "design" and "content" parts to not get stuck in details
**** Martin showed the current state of the issues on the [https://github.com/comakingspace/comakingspace.github.io/issues issue tracker]
*** Lukas suggested to first copy-paste the old content and then edit it step-by-step
*** Lars offered to help next week Wednesday (19:00 for 1h) to find a good concept to work together on
** For future marketing meetings it would be better to give concrete/focused tasks
*** E.g. Let's [https://github.com/comakingspace/do-something/issues/113 design a poster for future Maker Faires]
*** This could also be labeled as "Do-something hours"

== New (and newly available) tools at the space ==
* Makita DDF484 Cordless Drill
** Thanks to [[User:Ed Green|Ed]] we have a [[Cordless Drills#Makita DDF484|new cordless drill]] (without batteries)
** {{P}} asked on the mailing list and on Telegram who would chime in to buy some batteries.
*** We collected some of the donations during the meeting and {{P}} has already bought the batteries and charger ahead of time
* [[User:Johannes|Johannes]] brought in a new Weber grill (kettle BBQ) as a loan.
* [[User:lmnl99|Luca]] loaned a soldering station.
* [[Lukas]] bought a set of [[Auger Bits|auger bits]]
* [[Martin]] bought two new [[Bandsaw Blades|bandsaw blades]]
* {{NL}} bought new sanding pads for the [[Oscillating Tool]]
* {{NL}} bought some noise reduction for the [[CNC Room]] (Let´s hope it works)
* [[Johannes]], [[Kim]] and {{NL}} bought and installed a new freezer! (Please respect the [[Freezer|freezer rules]])
* [[Lukas]] documented the [[Jigsaws#Bosch_PST_750_PE_.22EXPO2000.22| Bosch Jigsaw]] and got it out of commissioning
''=> also see "[[Wish List]]"''

== Collaboration possibilities ==
Who's not in our [[Mailing List]] or [[Telegram Group]] yet? Also check out [[:Category:Community]]!

=== Bahnstadtfest ===
* The [https://github.com/comakingspace/do-something/issues/110 Bahnstadtfest] is coming closer (July 20th)!
** Does anybody have a project they could show there?
** who else would like to help out during the day (at our stand or volunteering at food stands or Bahnstadtlauf)?
** Project idea: Engrave some coins (wood or metal) with visitors names and the CoMakingSpace logo
** Lukas asked about what language we should use for the issues. He suggested to use German as only people who can speak German are helping.

=== Do-something days ===
[[Johannes]] and [[Martin]] are planning to host a do-something day this weekend. {{P}} asked for it to be focused on clean-something. Who is willing to join?

=== Current projects that are [[:Category:Looking for Collaborators|looking for collaborators]] ===

=== [[Issues]] ===

[https://github.com/comakingspace/do-something/issues?utf8=%E2%9C%93&q=is%3Aissue+closed%3A2019-05-03..2019-06-05 closed issues since the last plenum] 
[https://github.com/comakingspace/do-something/issues?utf8=%E2%9C%93&q=is%3Aissue+created%3A2019-05-03..2019-06-05 new issues since the last plenum]

-> especially important:
* the upcoming [https://github.com/comakingspace/do-something/issues/125 KiCad Seminar needs PR support]
* be aware of potential safety risks with the [https://github.com/comakingspace/do-something/issues/120 router table footswitch]!

=== Wiki ===

=== Area Patron Update ===
{| class="wikitable"
|-
!Area !! Patron !! Update !! Members Feedback
|-
|[[Electronics Bench]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[3D Printer Farm]] || [[User:Lmnl99|Luca]] & [[Kim]] || ''Added new Prusa Slicer 2.0'' || ''any feedback/thanks?''
|-
|[[Woodturning]] || [[User:Lukas|Lukas]] || bought a new [[Skew Chisel|skew chisel]] together with [[User:LokowandtG|Georg]] and [[User:Lmnl99|Luca]] (still looking for people to throw in a few € for other tool upgrades); improved tailstock & toolrest base screws of the Güde lathe || ''any feedback/thanks?''
|-
|[[CNC Router]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Fridge]] || [[Kim]] || ''any update?'' || ''any feedback/thanks?''
|}

Who else would like to become an [[Area Patron]] ''(Eckpate)''? Areas in need:
* wood workshop, e.g.:
** [[Drilling Table|drilling table]]
** sanding corner
* Metal Workshop, e.g.:
** lathes
** grinding
** welding
** hand tools
** [[Precious Plastic]]

== [[Event Ideas]] ==
=== Maus-Türöffnertag ===
[[User:Lars|Lars]] brought up the idea of participating in the Maus-Türöffnertag via the [[Mailing List]]. We should discuss possible projects and a possible orga-team:

<blockquote>''I've been watching the german "Sendung mit der Maus" (kind-of "How-its-made" for kids) for the past 32ish years - especially since I got three forks of my own. Every year on October 3rd, there's the [https://www.wdrmaus.de/extras/tueren_auf.php5 Maus-Türöffnertag], where kids can register and come to do something exciting with (or without) their parents. I'd love to get the CoMakerspace into the program, which would also generate some publicity.

''We'd have to provide some projects for that, suitable for kids of a specific age range (e.g. 6-10 or 8-12). Ideas:
* ''Building small robots from a toothbrushhead, a battery and a vibration motor (age 6+)
* ''Bending and welding little robot figurines from thick wire, threaded rods, washers and nuts (bending for 6+, welding 10+ with assistance or only from helpers?)
* ''Soldering small kits like a mini-tesla-coil: https://www.ebay.de/itm/401634796641
* ''Sowing ugly animals (kids draw a fantasy animal, which is then cut and sown from leftover materials)
* ''Whatever you can think of

''Let's talk in the plenum on benefits, cost and risks - e.g. insurance? Is it possible to make the space semi-childsafe for the target group?</blockquote>

=== Coder Dojo ===
We got a request from Sonja of "CoderDojo":

<blockquote>''Hallo Leute im CoMakingSpace,

''ich heiße Sonja und suche Gleichgesinnte, die gerne hacken, in Makerspaces unterwegs sind und Lust haben, Kindern und Jugendlichen zu ermöglichen, mit Technik zu spielen. Ich gehöre zum Verein CoderDojo - wir sind Teil der Raspberry Pi Stiftung - und unser Ziel ist es, Kindern und Jugendlichen das aktive Gestalten mit Technik näher zu bringen, häufig gehört da auch zu, Programmieren zu lernen.

''In Deutschland gibt es grade um die 30 Klubs (wir nennen sie Dojos). Das ist natürlich nicht genug, um interessierte Kids zu unterstützen. Falls Du Lust hast, in Deiner Region, was auf die Beine zu stellen, gib mir einfach bescheid. Unser gemeinnütziger Verein ist ein weltweites Netzwerk aus Bastel- und Computerinteressierten. Wir tauschen uns untereinander aus und teilen Materialien.

''Mehr Info über CoderDojo findest Du [https://coderdojo.com/de-DE hier] und speziell über den deutschen e.V. [https://coderdojo-deutschland.de/ hier].</blockquote>

Would anyone be interested in organizing such events in our Space?

===Makers Flea Market===
Andi (not our Andi!) proposed a makers flea market in heidelberg in the whatsapp group, since he would have some stuff to sell. He also offered to organize some benches and tables in order to enable people to present their stuff.

We should discuss what would be needed for such an event, whether we want to host it and if yes, when.

=== Repair Café ===
We've had this idea floating around for a while but [https://www.facebook.com/repaircafeheidelberg/ Repair Café Heidelberg] already had a cooperation partner/host (Haus der Jugend) - now that changed and they asked us to cooperate with them for the quarterly event! Who's interested? At the minimum we need an experienced volunteer to supervise the Space, but ideally also motivated tinkerers who would like to help with the repairs and tell people about our Space and the joy of joining or donating ;-)

The last event at their old location was in the beginning of May, so we are probably looking at events in August and November this year.

== Open Discussion ==
This is the place to talk about general improvements etc. - for example:
* What did I do since the last plenum?
[[Johannes]] re-wired the door bell. It now has a switch which allows you to change back to the boring old bell in case the [[Project:Enhanced Door Bell|awesome new one]] breaks.

* What am I planning to do until the next plenum?
* What went wrong?
* What went well?
* What should get done at the space (new issues)?

==Next Meeting ==

Plenum/Meeting minutes/2019-06-05

2019-06-05T18:12:47Z

Narquadah: /* Area Patron Update */

= Head =
''Idea/Overview: [[Plenum]]''

Date/Time: 
Attending Managers: 
Attending Members: 

= Topics =
Here's the list ''so far'' - please don't hesitate to add more! If you won't be able to attend, you can add your comments here or in the discussion to take part anyway :-)

== Project Presentations ==
Let's take about 2{{x}}20 minutes before each plenum to show others what we're working on! If you are interested in talking about your projects, please announce it here and/or via the [[Mailing List]]:

* ''<please add your idea(s)!>''
* ''<please add your idea(s)!>''

== Recap of the last plenum ==
*The Marketing Meetings were lacking participation. Is there any feedback why people did not attend?

== New (and newly available) tools at the space ==
* Makita DDF484 Cordless Drill
** Thanks to [[User:Ed Green|Ed]] we have a [[Cordless Drills#Makita DDF484|new cordless drill]] (without batteries)
** {{P}} asked on the mailing list and on Telegram who would chime in to buy some batteries.
* [[User:Johannes|Johannes]] brought in a new Weber grill (kettle BBQ) as a loan.
* [[User:lmnl99|Luca]] loaned a soldering station.
* [[Lukas]] bought a set of [[Auger Bits|auger bits]]
* [[Martin]] bought two new [[Bandsaw Blades|bandsaw blades]]
* {{NL}} bought new sanding pads for the [[Oscillating Tool]]
* {{NL}} bought some noise reduction for the [[CNC Room]] (Let´s hope it works)
* [[Johannes]], [[Kim]] and {{NL}} bought and installed a new freezer! (Please respect the freezer rules)
* [[Lukas]] documented the [[Jigsaws#Bosch_PST_750_PE_.22EXPO2000.22| Bosch Jigsaw]] and got it out of commissioning
''=> also see "[[Wish List]]"''

== Collaboration possibilities ==
Who's not in our [[Mailing List]] or [[Telegram Group]] yet? Also check out [[:Category:Community]]!

=== Bahnstadtfest ===
* The [https://github.com/comakingspace/do-something/issues/110 Bahnstadtfest] is coming closer (July 20th)!
** Does anybody have a project they could show there?
** who else would like to help out during the day (at our stand or volunteering at food stands or Bahnstadtlauf)?

=== Do-something days ===
[[Johannes]] and [[Martin]] are planning to host a do-something day this weekend. {{P}} asked for it to be focused on clean-something. Who is willing to join?

=== Current projects that are [[:Category:Looking for Collaborators|looking for collaborators]] ===

=== [[Issues]] ===

[https://github.com/comakingspace/do-something/issues?utf8=%E2%9C%93&q=is%3Aissue+closed%3A2019-05-03..2019-06-05 closed issues since the last plenum] 
[https://github.com/comakingspace/do-something/issues?utf8=%E2%9C%93&q=is%3Aissue+created%3A2019-05-03..2019-06-05 new issues since the last plenum]

-> especially important:
* the upcoming [https://github.com/comakingspace/do-something/issues/125 KiCad Seminar needs PR support]
* be aware of potential safety risks with the [https://github.com/comakingspace/do-something/issues/120 router table footswitch]!

=== Wiki ===

=== Area Patron Update ===
{| class="wikitable"
|-
!Area !! Patron !! Update !! Members Feedback
|-
|[[Electronics Bench]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[3D Printer Farm]] || [[User:Lmnl99|Luca]] & [[Kim]] || ''Added new Prusa Slicer 2.0'' || ''any feedback/thanks?''
|-
|[[Woodturning]] || [[User:Lukas|Lukas]] || bought a new [[Skew Chisel|skew chisel]] together with [[User:LokowandtG|Georg]] and [[User:Lmnl99|Luca]] (still looking for people to throw in a few € for other tool upgrades); improved tailstock & toolrest base screws of the Güde lathe || ''any feedback/thanks?''
|-
|[[CNC Router]] || [[User:Johannes|Johannes]] || ''any update?'' || ''any feedback/thanks?''
|-
|[[Fridge]] || [[Kim]] || ''any update?'' || ''any feedback/thanks?''
|}

Who else would like to become an [[Area Patron]] ''(Eckpate)''? Areas in need:
* wood workshop, e.g.:
** [[Drilling Table|drilling table]]
** sanding corner
* Metal Workshop, e.g.:
** lathes
** grinding
** welding
** hand tools
** [[Precious Plastic]]

== [[Event Ideas]] ==
=== Maus-Türöffnertag ===
[[User:Lars|Lars]] brought up the idea of participating in the Maus-Türöffnertag via the [[Mailing List]]. We should discuss possible projects and a possible orga-team:

<blockquote>''I've been watching the german "Sendung mit der Maus" (kind-of "How-its-made" for kids) for the past 32ish years - especially since I got three forks of my own. Every year on October 3rd, there's the [https://www.wdrmaus.de/extras/tueren_auf.php5 Maus-Türöffnertag], where kids can register and come to do something exciting with (or without) their parents. I'd love to get the CoMakerspace into the program, which would also generate some publicity.

''We'd have to provide some projects for that, suitable for kids of a specific age range (e.g. 6-10 or 8-12). Ideas:
* ''Building small robots from a toothbrushhead, a battery and a vibration motor (age 6+)
* ''Bending and welding little robot figurines from thick wire, threaded rods, washers and nuts (bending for 6+, welding 10+ with assistance or only from helpers?)
* ''Soldering small kits like a mini-tesla-coil: https://www.ebay.de/itm/401634796641
* ''Sowing ugly animals (kids draw a fantasy animal, which is then cut and sown from leftover materials)
* ''Whatever you can think of

''Let's talk in the plenum on benefits, cost and risks - e.g. insurance? Is it possible to make the space semi-childsafe for the target group?</blockquote>

=== Coder Dojo ===
We got a request from Sonja of "CoderDojo":

<blockquote>''Hallo Leute im CoMakingSpace,

''ich heiße Sonja und suche Gleichgesinnte, die gerne hacken, in Makerspaces unterwegs sind und Lust haben, Kindern und Jugendlichen zu ermöglichen, mit Technik zu spielen. Ich gehöre zum Verein CoderDojo - wir sind Teil der Raspberry Pi Stiftung - und unser Ziel ist es, Kindern und Jugendlichen das aktive Gestalten mit Technik näher zu bringen, häufig gehört da auch zu, Programmieren zu lernen.

''In Deutschland gibt es grade um die 30 Klubs (wir nennen sie Dojos). Das ist natürlich nicht genug, um interessierte Kids zu unterstützen. Falls Du Lust hast, in Deiner Region, was auf die Beine zu stellen, gib mir einfach bescheid. Unser gemeinnütziger Verein ist ein weltweites Netzwerk aus Bastel- und Computerinteressierten. Wir tauschen uns untereinander aus und teilen Materialien.

''Mehr Info über CoderDojo findest Du [https://coderdojo.com/de-DE hier] und speziell über den deutschen e.V. [https://coderdojo-deutschland.de/ hier].</blockquote>

Would anyone be interested in organizing such events in our Space?

===Makers Flea Market===
Andi (not our Andi!) proposed a makers flea market in heidelberg in the whatsapp group, since he would have some stuff to sell. He also offered to organize some benches and tables in order to enable people to present their stuff.

We should discuss what would be needed for such an event, whether we want to host it and if yes, when.

=== Repair Café ===
We've had this idea floating around for a while but [https://www.facebook.com/repaircafeheidelberg/ Repair Café Heidelberg] already had a cooperation partner/host (Haus der Jugend) - now that changed and they asked us to cooperate with them for the quarterly event! Who's interested? At the minimum we need an experienced volunteer to supervise the Space, but ideally also motivated tinkerers who would like to help with the repairs and tell people about our Space and the joy of joining or donating ;-)

The last event at their old location was in the beginning of May, so we are probably looking at events in August and November this year.

== Open Discussion ==
This is the place to talk about general improvements etc. - for example:
* What did I do since the last plenum?
[[Johannes]] re-wired the door bell. It now has a switch which allows you to change back to the boring old bell in case the [[Project:Enhanced Door Bell|awesome new one]] breaks.

* What am I planning to do until the next plenum?
* What went wrong?
* What went well?
* What should get done at the space (new issues)?

==Next Meeting ==

Freezer

2019-06-05T16:46:03Z

Narquadah: Created page with " == Freezer == {{MachineInfoBox |machine name=Freezer |image=comakingspace_freezer.jpeg |synonyms=Tiefkühltruhe |type= |material= |location=Kitchen |access= |status= |firmwar..."

== Freezer ==
{{MachineInfoBox
|machine name=Freezer
|image=comakingspace_freezer.jpeg
|synonyms=Tiefkühltruhe
|type=
|material=
|location=Kitchen
|access=
|status=
|firmware=
|software=
|manual=
|used with=
|similar=Fridge
|tutors=None
}}

Our freezer.

== Freezer Rules ==

1. Name your things 
2. Date your things

Unnamed and undated things are free for all

File:Comakingspace freezer.jpeg

2019-06-05T16:39:48Z

Narquadah: Our very awesome freezer ;)

== Summary ==
Our very awesome freezer ;)

3D Printing Ideas

2019-05-22T19:35:55Z

Narquadah:

Here are some project ideas. If you have other ideas, please add them! There is also a page for [[CNC Milling Ideas|CNC milling ideas]].

If you would like more inspiration, we suggesting looking at these [https://www.all3dp.com/cool-things-to-3d-print-useful/ cool things to 3D print] and this [https://all3dp.com/best-sites-free-stl-files-3d-printing/ huge collection of STL sharing websites].

=== Useful Things for Makers ===
* [https://www.thingiverse.com/thing:1259799 support for Dremel 4000]
* [https://www.thingiverse.com/thing:427024 cable spools] in different sizes for loose cables
* [https://www.thingiverse.com/thing:1611996 vacuum forming table]
* [https://www.prusaprinters.org/10-handy-little-gadgets-for-beginners-in-3d-printing/ Prusa's collection of 10 handy beginner prints]

=== Other ===
* [[Project:Cookie Cutters|cookie cutters]]
* boardgame pieces
* jewelry, e.g. [https://www.instructables.com/id/How-to-3D-Print-on-String/ printed on string]
* [http://3dp.rocks/lithophane/ Lithophane Generator (3D Rocks)]

[[Category:3D Printing]]
[[Category:Inspiration]]

Woodturning Introduction/Waiting

2019-05-03T20:51:43Z

Narquadah:

The [[Woodturning Introduction|woodturning introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' ''TBD when there are 3 members waiting''

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

* {{M}}
* [[User:Manu|Manu]]
* [[User:Stefan|Stefan]]

Archived:Mailing List

2019-03-28T12:48:24Z

Narquadah: Add mailing list email

We have a discussion list we like our members to participate in, but anyone else is welcome to join as well!

This aspect of our community may make it easy to get people who are usually in the space at different times than yourself, find collaborators for projects, get help with a tricky problem, and so on. To participate just send an email to mailto:makers@lists.comaking.space.

<big>Here you go: [https://lists.schokokeks.org/mailman/listinfo.cgi/makers "Makers" mailing list]</big>

[[Category:Community]]

Category:CNC Routing

2018-12-12T17:58:26Z

Narquadah:

[[File:CNC router.gif|right|400px]]
This category collects information about projects or facts related to our [[CNC Router|CNC router]].

''You may also be interested in [[milling]] :-)''

[[Category:CNC]]

User:Narquadah

2018-12-05T20:23:13Z

Narquadah: Created page with "Under Construction"

Under Construction

CNC Router Introduction/Waiting

2018-12-05T20:22:42Z

Narquadah: /* Interested Members */

The [[CNC Router Introduction|CNC router introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' ''TBD when there are 2-3 members waiting''

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

* [[User:Narquadah|Kim]]
* [[User:Blacksheep|Micha (Blacksheep)]]
* [[User:Johannes|Johannes]]

Laser Cutter Introduction/Waiting

2018-11-30T16:47:18Z

Narquadah: /* Interested Members */

The [[Laser Cutter Introduction|laser cutter introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' 2018-11-30, 20:00 - approx 22:00

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

In order for everyone to get detailed hands-on experience, it does not make sense to have more than 5 people in one introduction. So link yourself quickly!

next group:
* [[User:NitramLegov|Martin]]
* [[User:Johannes|Johannes]] vielleicht mit [[User:Luzian|Kind]]
* [[User:Ed Green|Ed]]
* ''<link yourself here!>''
* ''<link yourself here!>''

later:
* [[User:Blacksheep|Micha (Blacksheep)]]
* [[User:Narquadah|Kim]]
* ''<link yourself here!>''
* ''<link yourself here!>''
* ''<link yourself here!>''

CNC Router Introduction/Waiting

2018-11-29T11:46:34Z

Narquadah: /* Interested Members */

Laser Cutter Introduction/Waiting

2018-11-28T16:26:41Z

Narquadah: /* Interested Members */

The [[Laser Cutter Introduction|laser cutter introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' ''TBD when there are 2-3 members waiting''

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

In order for everyone to get detailed hands-on experience, it does not make sense to have more than 5 people in one introduction. So link yourself quickly!

next group:
* [[User:NitramLegov|Martin]]
* [[User:Narquadah|Kim]]
* ''<link yourself here!>''
* ''<link yourself here!>''
* ''<link yourself here!>''

later:
* ''<link yourself here!>''
* ''<link yourself here!>''
* ''<link yourself here!>''
* ''<link yourself here!>''
* ''<link yourself here!>''