CoMakingSpace Wiki - User Contributions [en]

Jigsaws

2019-02-06T17:49:34Z

Malte:

{{ToolInfoBox
|tool name=Jigsaws
|image=Slowmo jigsaw.gif
|synonyms=pendulum jigsaws, DE: Pendelstichsägen
|type=power [[saws]]
|access=upon [[Jigsaw Introduction|personal introduction]]
|material=[[wood]], [[metal]] ''& more'' (depending on blade)
|tutors=[[User:Lukas|Lukas]], {{M}}
}}

A jigsaw is a powerful tool for cutting various hard materials in '''curved lines'''. For intricate shapes and thin materials, have a look at a [[Scroll Saw|scroll saw]] or a [[Laser Cutter|laser cutter]]. While relatively straight lines can be achieved by means of a fence, a [[Circular Saw|circular saw]] (especially [[Chop Saw|chop]] or [[Table Saw|table saw]]) will produce better results if you need precision.

== Safety ==
When using the jigsaw, always take the time to properly [[Clamps|clamp]] down your workpiece, hook up a [[Shop Vac|shop vac]] and wear [[Goggles|safety glasses]].
Wear [[Hearing Protection|hearing protection]] as it is really loud.

== Accessories ==
=== Blades ===
''Saw blades for various materials are available.''

== Links ==
=== Basics ===
* [https://www.youtube.com/watch?v=jWneDzqAbH8 "What Can You Do with a Jigsaw?" by Steve Ramsey] (YouTube video)
* [https://assets.festool.com/media/p2010_gwps_de.pdf (DE) Grundwissen Stichsägen]

=== Upgrade Ideas ===
* [https://www.neutechnik.de/produktkategorien/stichs%C3%A4getisch-zubeh%C3%B6r/pr%C3%A4z-stichs%C3%A4getisch/ jigsaw table] (can be self-built)

 
== Parkside PSTD 800 A1 ==
{{ToolInfoBox
|tool name=Parkside PSTD 800 A1
|image=Parkside_PSTD_800_A1.jpg
|location=[[Chop Saw Station|chop saw station]]
|tutors=[[User:Lukas|Lukas]], {{M}}
|manual=in the box, [http://www.lidl-service.com/static/134937369/114249_DE.pdf pdf]
}}
[[Mitja]]'s jigsaw works with T-shank blades.

It has a laser sight but you are better off ignoring that feature and setting up a solid fence to cut along ;-)

 
== Bosch PST 750 PE "EXPO2000" ==
{{ToolInfoBox
|tool name=Bosch PST 750 PE "EXPO2000"
|image=Bosch EXPO2000.JPG
|location=
|tutors=[[User:Lukas|Lukas]]
|manual=[https://apps10.bosch-do-it.de/manuals/downloads/99795.pdf Bosch-do-it.de]
}}

[[User:Lukas|Lukas]] owns a Bosch jigsaw that needs commissioning.
{{Commissioning
|IssueNumber=36
|Naming=done
|NamingComment="EXPO2000" is the only name on the case, but actually a "PST 750 PE" by its inner workings
|Picture=done
|PictureComment=
|Manual=done
|ManualComment=[https://apps10.bosch-do-it.de/manuals/downloads/99795.pdf Bosch-do-it.de]
|Documentation=
|DocumentationComment=especially the above section about blades
|QR=
|QRComment=
|Introduction=done
|IntroductionComment=[[Jigsaw Introduction]]
|Security=
|SecurityComment=
|Test=
|TestComment=
|OwnerValue=
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

[[User:Malte|Malte]] 3D printed an adapter to use this with our Festool shop vac, [https://www.thingiverse.com/thing:3408971 here's the design on Thingiverse] in case it should break or go missing.

[[Category:Power Tools]]
[[Category:Saws]]
[[Category:Woodworking]]

Shop Vacs

2019-02-06T17:44:13Z

Malte:

A shop vac is needed for every operation of dust-generating [[:Category:Power Tools|power tools]] (see list [[Shop Vac#Compatible Tools|below]]). It is also useful for cleaning your workspace or the floor after you are done for the day.

== Accessories ==
Floor attachments should help clean the rooms more effectively. We have a few that came with the small "Shop Vac" brand machine; [[Mitja]] also [[3DP|3D printed]] an orange adapter to connect those with the Festool hose.

== Emptying Bags ==
On a windless day you can empty the shop vac's dry bag into a regular trash bag '''outside'''. If you notice any damage to the bag, or dirt inside the machine, [[Management|report it]] immediately and do not use the machine until a new bag is purchased.

 

== Festool CTM26 E AC ==
{{ToolInfoBox
|tool name=Festool CTM26 E AC
|image=Festool CTM26 E AC.jpg
|synonyms=hoover; DE: Kesselsauger
|access=upon reading
|location=[[Wood Workshop|wood workshop]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=[https://www.libble.de/festool-ctm-26-e-ac/p/470124/ libble.de]
}}
The large Festool shop vac can also be used as an extension cord of sorts and supports continuous (manual) or automatic (depending on the connected tool) action.

Use this shop vac whenever dealing with dangerous dust - it is class "M" rated.

=== Compatible Tools ===
'''already compatible:'''
* [[Table Saw|table saw]]
* [[Circular Saw|circular saw]]
* [[Chop Saw|chop saw]]
* "Parkside" [[jigsaw]]
* [[Scroll Saw|scroll saw]]
* [[router]]
* [[Router Table]]
* [[Eccentric Sanders|eccentric sanders]] (old Festool "Rotex" models)
* [[Oscillating_Tool#Shop_Vac_Adapter|Oscillating Tool]]
**[https://www.thingiverse.com/thing:3392262 Design on Thingiverse]
* [[Jigsaws|Bosch jigsaw]]
**[https://www.thingiverse.com/thing:3408971 Design on Thingiverse]

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''
* [[Drill Press|drill press]] - rather complicated to make, but could be nice for certain materials
* [[Bandsaws]]
** Metabo BS 1638 W
** CMI C-S-BS 250
* <more TBD>

 

== ShopVac Super K11-SQ14 ==
{{ToolInfoBox
|tool name=ShopVac Super K11-SQ14
|image=ShopVac Super K11-SQ14.JPG
|synonyms=Shop Vac Nass-Trockensauger Super 16
|access=upon reading
|location=[[CNC Room|CNC room]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=
}}
Our small shop vac is '''not equipped with a fine filter and therefore unsuitable for harmful dust'''. It is quite okay for "normal" cleaning tasks, though, and might be enough to hook up to the [[CNC Router|CNC router's]] dust extraction.

Perhaps we should add a fine dust filter to its exhaust once everything else (cyclone separator, connecting hose to the CNC router) is set up, we'll see!

=== Consumables ===
* bags: 16 L (4 gallons), e.g. [https://www.bauhaus.info/staubsaugerbeutel-staubsaugerfilter/shop-vac-staubbeutel/p/21292534 these from Bauhaus]

=== Compatible Tools ===
'''already compatible:'''
* [[CNC Router|CNC router]] (see [https://github.com/comakingspace/do-something/issues/15 #15])

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''

[[Category:Cleaning]]

Shop Vacs

2019-02-06T17:40:03Z

Malte:

A shop vac is needed for every operation of dust-generating [[:Category:Power Tools|power tools]] (see list [[Shop Vac#Compatible Tools|below]]). It is also useful for cleaning your workspace or the floor after you are done for the day.

== Accessories ==
Floor attachments should help clean the rooms more effectively. We have a few that came with the small "Shop Vac" brand machine; [[Mitja]] also [[3DP|3D printed]] an orange adapter to connect those with the Festool hose.

== Emptying Bags ==
On a windless day you can empty the shop vac's dry bag into a regular trash bag '''outside'''. If you notice any damage to the bag, or dirt inside the machine, [[Management|report it]] immediately and do not use the machine until a new bag is purchased.

 

== Festool CTM26 E AC ==
{{ToolInfoBox
|tool name=Festool CTM26 E AC
|image=Festool CTM26 E AC.jpg
|synonyms=hoover; DE: Kesselsauger
|access=upon reading
|location=[[Wood Workshop|wood workshop]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=[https://www.libble.de/festool-ctm-26-e-ac/p/470124/ libble.de]
}}
The large Festool shop vac can also be used as an extension cord of sorts and supports continuous (manual) or automatic (depending on the connected tool) action.

Use this shop vac whenever dealing with dangerous dust - it is class "M" rated.

=== Compatible Tools ===
'''already compatible:'''
* [[Table Saw|table saw]]
* [[Circular Saw|circular saw]]
* [[Chop Saw|chop saw]]
* "Parkside" [[jigsaw]]
* [[Scroll Saw|scroll saw]]
* [[router]]
* [[Router Table]]
* [[Eccentric Sanders|eccentric sanders]] (old Festool "Rotex" models)
* [[Oscillating_Tool#Shop_Vac_Adapter|Oscillating Tool]]
**[https://www.thingiverse.com/thing:3392262 Design on Thingiverse]
* Bosch jigsaw ({{£}}, not in the wiki yet)
**[https://www.thingiverse.com/thing:3408971 Design on Thingiverse]

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''
* [[Drill Press|drill press]] - rather complicated to make, but could be nice for certain materials
* [[Bandsaws]]
** Metabo BS 1638 W
** CMI C-S-BS 250
* <more TBD>

 

== ShopVac Super K11-SQ14 ==
{{ToolInfoBox
|tool name=ShopVac Super K11-SQ14
|image=ShopVac Super K11-SQ14.JPG
|synonyms=Shop Vac Nass-Trockensauger Super 16
|access=upon reading
|location=[[CNC Room|CNC room]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=
}}
Our small shop vac is '''not equipped with a fine filter and therefore unsuitable for harmful dust'''. It is quite okay for "normal" cleaning tasks, though, and might be enough to hook up to the [[CNC Router|CNC router's]] dust extraction.

Perhaps we should add a fine dust filter to its exhaust once everything else (cyclone separator, connecting hose to the CNC router) is set up, we'll see!

=== Consumables ===
* bags: 16 L (4 gallons), e.g. [https://www.bauhaus.info/staubsaugerbeutel-staubsaugerfilter/shop-vac-staubbeutel/p/21292534 these from Bauhaus]

=== Compatible Tools ===
'''already compatible:'''
* [[CNC Router|CNC router]] (see [https://github.com/comakingspace/do-something/issues/15 #15])

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''

[[Category:Cleaning]]

Oscillating Tool

2019-01-30T18:16:28Z

Malte:

{{ToolInfoBox
|tool name=Fein MSxe 636 II
|image=Fein Multimaster.JPG
|synonyms=oscillator, "multitool"; DE: Oszillierer, Oszillationssäge, Vibrationssäge, MultiMaster, "Zappler", Oszillationswerkzeug
|type=power tool
|material=[[wood]], [[metal]], [[plastics]] (depending on inserted accessory)
|used with=
|location=''storage''
|access=upon [[Oscillating_Tool_Introduction | personal introduction]]
|tutors=[[User:Lukas|Lukas]], [[User:NitramLegov/Tutor|Martin]]
|manual=[https://www.manualslib.com/manual/1093914/Fein-Msxe-636-Ii.html manuals lib]
|donation=
|similar=[[saws]], [[sanders]], [[Rotary Tool|rotary tool]]
}}
An oscillating tool moves its head back and forth at high speeds by a tiny amount, thereby eliminating much of the kickback you might experience with regular electric [[saws]] or [[sanders]]. It is therefore especially nice for delicate workpieces and hard-to-reach places.

== Accessories ==
A list of accessories can be found at the [https://fein.com/de_de/oszillierer/zubehoer/ Fein shop].
An oscillating tool is a very flexible tool which can be used for a broad range of tasks and with a broad range of materials.
In order to achieve this flexibility, a variety of attachments exist, which can quickly be attached to the tool.

Depending on the attachment and the use-case, different oscillating frequencies are available. According to the manual, they should be selected following this logic:
* high oscillation frequency: sanding, sawing, rasping; polishing stone and metal
* low oscillation frequency: polishing varnishes

Please note that we do NOT have everything available, you may want to bring the attachment needed for your project:
 
=== Sanding Pads ===
{{ToolInfoBox
|tool name=Sanding Pads
|image=Oscillating Tool Sander.jpg ‎
|synonyms=DE: Schleifplatten
|type=attachment for the oscillating tool
|access=
|location=oscillating tool's box
|material=
}}
We have several sanding pads that hold compatible triangular sandpaper sheets with a hook-and-loop ''(Klett)'' system. Please bring more sanding sheets when you consume some!
 
=== Shop Vac Adapter ===
{{ToolInfoBox
|tool name=Shop Vac Adapter
|image=Oscillating Tool Vac Adapter.jpg
|synonyms=DE: Staubsaugeradapter
|type=attachment for the oscillating tool
|access=
|location=oscillating tool's box
|material=
}}
We have an adapter for the [[Shop Vac|shop vac]], which can be used when sanding! Please note that there are different sanding attachments. Please use the shop vac only with the ones with holes. Otherwise, it will not work. [https://www.thingiverse.com/thing:3392262 Frestool adapter design on Thingiverse]

 
=== Saw Blades ===
{{ToolInfoBox
|tool name=Saw Blades
|image=‎‎Oscillating Tool Saw Fix.jpg
|synonyms=DE: Sägeblätter
|type=attachment for the oscillating tool
|access=
|location=
|material=many, [https://fein.com/de_de/oszillierer/zubehoer/saegen/ depending on type of blade]
}}
Saw blades for the oscillating tool come in two basic variants - fixed or exchangeable. The [https://fein.com/de_de/oszillierer/zubehoer/saegen/ Fein shop] only seems to be selling fixed ones, perhaps because they are more stable and will deliver consistent quality?

[[File:Oscillating Tool Saw Changeable.jpg|200px|thumb|left|exchangeable saw attachment]]
Exchangeable saw attachments are attachments to the oscillating tool in which the saw blade is replaceable. In case the saw breaks or becomes blunt, the saw blade can easily be replaced and therefore not the whole attachment has to be thrown away.
 
[[File:Oscillating Tool Saw Fix.jpg|200px|thumb|left|fixed saw attchment]] ‎
Fixed saw attachments are attachments to the oscillating tool in which the saw blade is fixed and cannot be replaced. In case the saw breaks or becomes blunt, the whole attachment has to be replaced.
 

As with "normal" saws, there are different teeth profiles or coatings for various materials.
 
==== Carbide Coated Saw Blades ====
[[File:Oscillating Tool Saw Hard Metal.jpg|thumb|left|carbide saw blade]]‎‎
Carbide coated saw blades ''(Hartmetall-Sägeblätter)'' are being used when cutting joints between tiles ''(Fugen)''. They are useful for removing defective tile ground, but can also be used for cutting into plaster or porous concrete ([https://fein.com/en_us/multi-tools/accessories/cutting-filing/carbide-saw-blade-order-no-6-35-02-170-21-0/ according to Fein]).

 
===Scraper Tools===
{{ToolInfoBox
|tool name=Scraper Attachment
|image=Oscillating Tool Scraper.jpg ‎
|synonyms=
|type=attachment for the oscillating tool
|access=
|location=
|material=
}}
Scraper blades can be used "for removal of stubborn paint, adhesive residue, carpet, tile adhesive, and underseal." [https://fein.com/en_us/accessories/scraping/rigid-scraper-blade-order-no-6-39-03-234-21-0/?back=1&start=product&productId=342759]

[[Category:Metalworking]]
[[Category:Power Tools]]
[[Category:Saws]]
[[Category:Sanders]]
[[Category:Sanding]]
[[Category:Woodworking]]

Shop Vacs

2019-01-30T18:10:44Z

Malte:

A shop vac is needed for every operation of dust-generating [[:Category:Power Tools|power tools]] (see list [[Shop Vac#Compatible Tools|below]]). It is also useful for cleaning your workspace or the floor after you are done for the day.

== Accessories ==
Floor attachments should help clean the rooms more effectively. We have a few that came with the small "Shop Vac" brand machine; [[Mitja]] also [[3DP|3D printed]] an orange adapter to connect those with the Festool hose.

== Emptying Bags ==
On a windless day you can empty the shop vac's dry bag into a regular trash bag '''outside'''. If you notice any damage to the bag, or dirt inside the machine, [[Management|report it]] immediately and do not use the machine until a new bag is purchased.

 

== Festool CTM26 E AC ==
{{ToolInfoBox
|tool name=Festool CTM26 E AC
|image=Festool CTM26 E AC.jpg
|synonyms=hoover; DE: Kesselsauger
|access=upon reading
|location=[[Wood Workshop|wood workshop]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=[https://www.libble.de/festool-ctm-26-e-ac/p/470124/ libble.de]
}}
The large Festool shop vac can also be used as an extension cord of sorts and supports continuous (manual) or automatic (depending on the connected tool) action.

Use this shop vac whenever dealing with dangerous dust - it is class "M" rated.

=== Compatible Tools ===
'''already compatible:'''
* [[Table Saw|table saw]]
* [[Circular Saw|circular saw]]
* [[Chop Saw|chop saw]]
* "Parkside" [[jigsaw]]
* [[Scroll Saw|scroll saw]]
* [[router]]
* [[Router Table]]
* [[Eccentric Sanders|eccentric sanders]] (old Festool "Rotex" models)
* [[Oscillating_Tool#Shop_Vac_Adapter|Oscillating Tool]]
**[https://www.thingiverse.com/thing:3392262 Design on Thingiverse]

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''
* Bosch jigsaw ({{£}}, not in the wiki yet)
* [[Drill Press|drill press]] - rather complicated to make, but could be nice for certain materials
* [[Bandsaws]]
** Metabo BS 1638 W
** CMI C-S-BS 250
* <more TBD>

 

== ShopVac Super K11-SQ14 ==
{{ToolInfoBox
|tool name=ShopVac Super K11-SQ14
|image=ShopVac Super K11-SQ14.JPG
|synonyms=Shop Vac Nass-Trockensauger Super 16
|access=upon reading
|location=[[CNC Room|CNC room]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=
}}
Our small shop vac is '''not equipped with a fine filter and therefore unsuitable for harmful dust'''. It is quite okay for "normal" cleaning tasks, though, and might be enough to hook up to the [[CNC Router|CNC router's]] dust extraction.

Perhaps we should add a fine dust filter to its exhaust once everything else (cyclone separator, connecting hose to the CNC router) is set up, we'll see!

=== Consumables ===
* bags: 16 L (4 gallons), e.g. [https://www.bauhaus.info/staubsaugerbeutel-staubsaugerfilter/shop-vac-staubbeutel/p/21292534 these from Bauhaus]

=== Compatible Tools ===
'''already compatible:'''
* [[CNC Router|CNC router]] (see [https://github.com/comakingspace/do-something/issues/15 #15])

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''

[[Category:Cleaning]]

Shop Vacs

2019-01-16T16:59:19Z

Malte: /* Compatible Tools */

A shop vac is needed for every operation of dust-generating [[:Category:Power Tools|power tools]] (see list [[Shop Vac#Compatible Tools|below]]). It is also useful for cleaning your workspace or the floor after you are done for the day.

== Accessories ==
Floor attachments should help clean the rooms more effectively. We have a few that came with the small "Shop Vac" brand machine; [[Mitja]] also [[3DP|3D printed]] an orange adapter to connect those with the Festool hose.

== Emptying Bags ==
On a windless day you can empty the shop vac's dry bag into a regular trash bag '''outside'''. If you notice any damage to the bag, or dirt inside the machine, [[Management|report it]] immediately and do not use the machine until a new bag is purchased.

''Festool: bag last emptied 2018-4-30''

 
== Festool CTM26 E AC ==
{{ToolInfoBox
|tool name=Festool CTM26 E AC
|image=Festool CTM26 E AC.jpg
|synonyms=hoover; DE: Kesselsauger
|access=upon reading
|location=[[Wood Workshop|wood workshop]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=
}}
The large Festool shop vac can also be used as an extension cord of sorts and supports continuous (manual) or automatic (depending on the connected tool) action.

Use this shop vac whenever dealing with dangerous dust - it is class "M" rated.

=== Compatible Tools ===
'''already compatible:'''
* [[Table Saw|table saw]]
* [[Circular Saw|circular saw]]
* [[Chop Saw|chop saw]]
* "Parkside" [[jigsaw]]
* [[Scroll Saw|scroll saw]]
* [[router]]
* [[Router Table]]
* [[Eccentric Sanders|eccentric sanders]] (old Festool "Rotex" models)

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''
* Bosch jigsaw ({{£}}, not in the wiki yet)
* [[Drill Press|drill press]] - rather complicated to make, but could be nice for certain materials
* [[Oscillating_Tool#Shop_Vac_Adapter|Oscillating Tool]]
* [[Bandsaws]]
** Metabo BS 1638 W
** CMI C-S-BS 250
* <more TBD>

 

== ShopVac Super K11-SQ14 ==
{{ToolInfoBox
|tool name=ShopVac Super K11-SQ14
|image=ShopVac Super K11-SQ14.JPG
|synonyms=Shop Vac Nass-Trockensauger Super 16
|access=upon reading
|location=[[CNC Room|CNC room]]
|material=dry dirt in its usual setup, '''wet dirt only with special bag'''
|tutors=
|manual=
}}
Our small shop vac is '''not equipped with a fine filter and therefore unsuitable for harmful dust'''. It is quite okay for "normal" cleaning tasks, though, and might be enough to hook up to the [[CNC Router|CNC router's]] dust extraction.

Perhaps we should add a fine dust filter to its exhaust once everything else (cyclone separator, connecting hose to the CNC router) is set up, we'll see!

=== Consumables ===
* bags: 16 L (4 gallons), e.g. [https://www.bauhaus.info/staubsaugerbeutel-staubsaugerfilter/shop-vac-staubbeutel/p/21292534 these from Bauhaus]

=== Compatible Tools ===
'''already compatible:'''
* [[CNC Router|CNC router]] (see [https://github.com/comakingspace/do-something/issues/15 #15])

'''not tested/[https://github.com/comakingspace/do-something/issues/24 adapters needed]:'''

[[Category:Cleaning]]