CoMakingSpace Wiki - User Contributions [en]

Vehicle Workspaces

2025-12-25T09:01:09Z

Lepus: /* Warteliste */

''>>> also check out #topic-vans on [[slack]]!''

The CoMakingSpace currently offers 3 vehicle workspaces that can be used with the corresponding [[membership]] option. The spaces are 3.5 m wide and 6 m long, and our gate is 3.00 m high (yes, '''precisely''').
[[File:Holme2.jpg|It's really useful to have a full set of tools near your vehicle! Check out [[Project:CamperVan]] by [[St3ffi]] & [[Mfisch3r]]|thumb|200px]]
[[File:Van-Built .jpg|VW T4 interior by [[User:Ciara|Ciara]] & [[User:Jannis|Jannis]]|thumb|200px]]

As specified in our ''[[Werkstattordnung]]'', these are NOT to be used as [[storage]] or parking spots but should aid in the active realization of larger vehicle projects. "Vehicle projects" for us means creative building as well as extensive alterations and repairs of all kinds of vehicles - so whether you're going to do a camper van conversion, design a cargo bike or trailer from scratch, or perhaps restore an old treasure, we are excited to see the results and what you'll learn in the process! Keep in mind that the [[Werkstattordnung]] rules are still in place. For example work on and around the engine/transmission is not permitted due to the risk of oil/gas leakage.

Since there may be times with more interested members than available spaces, we are compiling the waiting list '''[[#Warteliste|below]]'''. Members who are interested in using one of the spots can simply enter themselves. As soon as a verhicle space frees up, we will then offer it to the longest waiting member!

----
''>>> schaut euch auch mal #topic-vans auf [[slack]] an!''

''Der CoMakingSpace hat momentan 3 Fahrzeug-Werkplätze, die mit einer entsprechenden [[membership|Mitgliedschaftsoption]] genutzt werden können. Die Plätze sind 6 m lang und 3,5 m breit, und unser Tor hat eine Höhe von 3,00 m.''

''Gemäß unserer [[Werkstattordnung]] handelt es sich dabei NICHT um [[Lager]]- oder Stellplätze, sondern um Flächen zur aktiven Verfolgung von umfangreicheren Fahrzeugprojekten. "Fahrzeugprojekte" sind bei uns kreative Neubauten sowie größere Umbauten und Reparaturen von Fahrzeugen aller Art - wenn ihr also beispielsweise einen Van ausbauen, ein Lastenrad oder Anhänger selbst entwickeln oder ein altes Schätzchen herrichten wollt sind wir gespannt auf die Resultate und was ihr "unterwegs" herausfindet! Bedenkt bitte, dass die [[Werkstattordnung]] auch bei den Fahrzeugplätzen besteht. Zum Beispiel sind Arbeiten am und um den Motorraum oder das Getriebe aufgrund des Risikos von Öl-/Benzinaustritt nicht möglich.''

''Da es vorkommen kann, dass es mehr Interessenten als Plätze gibt, haben wir die folgende Warteliste eingerichtet. Hier sollen sich Mitglieder eintragen, die einen Fahrzeugplatz nutzen wollen. Sobald einer frei geworden ist wird dieser an das am längsten wartende Mitglied in der Warteliste vergeben:''

== Warteliste ==
* Fahrzeugplätze werden für max. 6 Monate vergeben
* kürzere Zeiten sind auch möglich, auf jeden Fall wird direkt beim Einzug das Ende festgehalten
* Wer länger braucht, kann nach Ablauf der Zeit Glück haben und direkt als erster "Wartender" weitermachen oder muss den Platz freimachen und ganz regulär warten, bis ein neuer frei wird
* Wer einen Monat vor Ende der vereinbarten Laufzeit weiß, dass mehr Zeit doch gut wäre, darf sich bereits wieder auf die Liste setzen

{| class="wikitable"
!Platz:
|links
|mittig
|rechts
|-
!genutzt bis:
|1.2.2026
|''max. 4.4.2026''
|''max. 1.5.2026''
|-
!aktuell:
|[[Konsti]]
|[[Lepus]]
|[[MaKu]]
|-
!Nachfolge:
|?
|?
|[[Mamad]]
|}

Bei Interesse bitte '''hier eintragen''':
* Nidal (Lepus), Mittig, Verlängerung bis 4.5.2026

[[Category:Facilities]]
[[Category:Vehicles]]

Waiting Lists

2025-08-30T06:35:00Z

Lepus: /* Sliding Table Saw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[Deaf]]
*[[MobiTobi]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]
*LeoF

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Cjaeck|Christian Jäck]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[User:Lepus|Nidal]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*[[User:Erik|Erik]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*LeoF

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]
*LeoF

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]
*LeoF
*Tom

[[Category:Introductions]]

Waiting Lists

2025-08-30T06:34:25Z

Lepus: /* CNC Router Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[Deaf]]
*[[MobiTobi]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]
*LeoF

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Cjaeck|Christian Jäck]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[User:Lepus|Nidal]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*[[User:Erik|Erik]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*LeoF

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]
*LeoF

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]
*LeoF
*Tom

[[Category:Introductions]]

Waiting Lists

2025-08-16T06:25:00Z

Lepus: /* CNC Router Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[User:Nicolai|Nicolai]]
*[[Deaf]]
*[[MobiTobi]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Cjaeck|Christian Jäck]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[User:Lepus|Nidal]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*[[User:Erik|Erik]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]

[[Category:Introductions]]

Waiting Lists

2025-08-16T06:24:30Z

Lepus: /* CNC Mill Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[User:Nicolai|Nicolai]]
*[[Deaf]]
*[[MobiTobi]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Cjaeck|Christian Jäck]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[User:Lepus|Nidal]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*[[User:Erik|Erik]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]

[[Category:Introductions]]

Waiting Lists

2025-08-16T06:23:11Z

Lepus: /* Metal Lathe Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[User:Nicolai|Nicolai]]
*[[Deaf]]
*[[MobiTobi]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Cjaeck|Christian Jäck]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[User:Lepus|Nidal]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*[[User:Erik|Erik]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]

[[Category:Introductions]]

Waiting Lists

2025-08-16T06:22:37Z

Lepus: /* Metal Lathe Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:SteffenK|Steffen]]
*[[LuLeBe|Leander Berg]]
*[[MobiTobi]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[User:Nicolai|Nicolai]]
*[[Deaf]]
*[[MobiTobi]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Haifischfutter|Markus K.]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Jnafls|Johannnes]]
*[[Deaf]]
*[[Erik]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Cjaeck|Christian Jäck]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*Nidal

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[User:Lepus|Nidal]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*[[User:Erik|Erik]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

'''Waiting Members:'''

*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]

[[Category:Introductions]]

User talk:MaKu

2025-08-10T13:03:23Z

Lepus: /* Stellplatz */ new section

== Stellplatz ==

Hallo Martin & Laura,

habe mich auf die Warteliste für einen Stellplatz geschrieben.

Euer Platz wäre ab Anfang Okt. frei, richtig?

Möchtet ihr den evtl. etwas früher weiter geben?

Grüsse,

Nidal [[User:Lepus|Lepus]] ([[User talk:Lepus|talk]]) 15:03, 10 August 2025 (CEST)

Vehicle Workspaces

2025-06-29T13:58:29Z

Lepus: /* Warteliste */

''>>> also check out #topic-vans on [[slack]]!''

The CoMakingSpace currently offers 3 vehicle workspaces that can be used with the corresponding [[membership]] option. The spaces are 3.5 m wide and 6 m long, and our gate is 3.00 m high (yes, '''precisely''').
[[File:Holme2.jpg|It's really useful to have a full set of tools near your vehicle! Check out [[Project:CamperVan]] by [[St3ffi]] & [[Mfisch3r]]|thumb|200px]]
[[File:Van-Built .jpg|VW T4 interior by [[User:Ciara|Ciara]] & [[User:Jannis|Jannis]]|thumb|200px]]

As specified in our ''[[Werkstattordnung]]'', these are NOT to be used as [[storage]] or parking spots but should aid in the active realization of larger vehicle projects. "Vehicle projects" for us means creative building as well as extensive alterations and repairs of all kinds of vehicles - so whether you're going to do a camper van conversion, design a cargo bike or trailer from scratch, or perhaps restore an old treasure, we are excited to see the results and what you'll learn in the process! Keep in mind that the [[Werkstattordnung]] rules are still in place. For example work on and around the engine/transmission is not permitted due to the risk of oil/gas leakage.

Since there may be times with more interested members than available spaces, we are compiling the waiting list '''[[#Warteliste|below]]'''. Members who are interested in using one of the spots can simply enter themselves. As soon as a verhicle space frees up, we will then offer it to the longest waiting member!

----
''>>> schaut euch auch mal #topic-vans auf [[slack]] an!''

''Der CoMakingSpace hat momentan 3 Fahrzeug-Werkplätze, die mit einer entsprechenden [[membership|Mitgliedschaftsoption]] genutzt werden können. Die Plätze sind 6 m lang und 3,5 m breit, und unser Tor hat eine Höhe von 3,00 m.''

''Gemäß unserer [[Werkstattordnung]] handelt es sich dabei NICHT um [[Lager]]- oder Stellplätze, sondern um Flächen zur aktiven Verfolgung von umfangreicheren Fahrzeugprojekten. "Fahrzeugprojekte" sind bei uns kreative Neubauten sowie größere Umbauten und Reparaturen von Fahrzeugen aller Art - wenn ihr also beispielsweise einen Van ausbauen, ein Lastenrad oder Anhänger selbst entwickeln oder ein altes Schätzchen herrichten wollt sind wir gespannt auf die Resultate und was ihr "unterwegs" herausfindet! Bedenkt bitte, dass die [[Werkstattordnung]] auch bei den Fahrzeugplätzen besteht. Zum Beispiel sind Arbeiten am und um den Motorraum oder das Getriebe aufgrund des Risikos von Öl-/Benzinaustritt nicht möglich.''

''Da es vorkommen kann, dass es mehr Interessenten als Plätze gibt, haben wir die folgende Warteliste eingerichtet. Hier sollen sich Mitglieder eintragen, die einen Fahrzeugplatz nutzen wollen. Sobald einer frei geworden ist wird dieser an das am längsten wartende Mitglied in der Warteliste vergeben:''

== Warteliste ==
* Fahrzeugplätze werden für max. 6 Monate vergeben
* kürzere Zeiten sind auch möglich, auf jeden Fall wird direkt beim Einzug das Ende festgehalten
* Wer länger braucht, kann nach Ablauf der Zeit Glück haben und direkt als erster "Wartender" weitermachen oder muss den Platz freimachen und ganz regulär warten, bis ein neuer frei wird
* Wer einen Monat vor Ende der vereinbarten Laufzeit weiß, dass mehr Zeit doch gut wäre, darf sich bereits wieder auf die Liste setzen

{| class="wikitable"
!Platz:
|links
|mittig
|rechts
|-
!genutzt bis:
|''max. 4.12.2025''
|''max. 4.10.2025''
|''max. 1.11.2025''
|-
!aktuell:
|[[Konsti]]
|[[MaKu]]
|[[Mamad]]
|-
!Nachfolge:
|?
|?
|?
|}

Bei Interesse bitte '''hier eintragen''':
* Nidal Saghir (ab Oct)

[[Category:Facilities]]
[[Category:Vehicles]]

Vehicle Workspaces

2025-06-29T13:56:36Z

Lepus: /* Warteliste */

''>>> also check out #topic-vans on [[slack]]!''

The CoMakingSpace currently offers 3 vehicle workspaces that can be used with the corresponding [[membership]] option. The spaces are 3.5 m wide and 6 m long, and our gate is 3.00 m high (yes, '''precisely''').
[[File:Holme2.jpg|It's really useful to have a full set of tools near your vehicle! Check out [[Project:CamperVan]] by [[St3ffi]] & [[Mfisch3r]]|thumb|200px]]
[[File:Van-Built .jpg|VW T4 interior by [[User:Ciara|Ciara]] & [[User:Jannis|Jannis]]|thumb|200px]]

As specified in our ''[[Werkstattordnung]]'', these are NOT to be used as [[storage]] or parking spots but should aid in the active realization of larger vehicle projects. "Vehicle projects" for us means creative building as well as extensive alterations and repairs of all kinds of vehicles - so whether you're going to do a camper van conversion, design a cargo bike or trailer from scratch, or perhaps restore an old treasure, we are excited to see the results and what you'll learn in the process! Keep in mind that the [[Werkstattordnung]] rules are still in place. For example work on and around the engine/transmission is not permitted due to the risk of oil/gas leakage.

Since there may be times with more interested members than available spaces, we are compiling the waiting list '''[[#Warteliste|below]]'''. Members who are interested in using one of the spots can simply enter themselves. As soon as a verhicle space frees up, we will then offer it to the longest waiting member!

----
''>>> schaut euch auch mal #topic-vans auf [[slack]] an!''

''Der CoMakingSpace hat momentan 3 Fahrzeug-Werkplätze, die mit einer entsprechenden [[membership|Mitgliedschaftsoption]] genutzt werden können. Die Plätze sind 6 m lang und 3,5 m breit, und unser Tor hat eine Höhe von 3,00 m.''

''Gemäß unserer [[Werkstattordnung]] handelt es sich dabei NICHT um [[Lager]]- oder Stellplätze, sondern um Flächen zur aktiven Verfolgung von umfangreicheren Fahrzeugprojekten. "Fahrzeugprojekte" sind bei uns kreative Neubauten sowie größere Umbauten und Reparaturen von Fahrzeugen aller Art - wenn ihr also beispielsweise einen Van ausbauen, ein Lastenrad oder Anhänger selbst entwickeln oder ein altes Schätzchen herrichten wollt sind wir gespannt auf die Resultate und was ihr "unterwegs" herausfindet! Bedenkt bitte, dass die [[Werkstattordnung]] auch bei den Fahrzeugplätzen besteht. Zum Beispiel sind Arbeiten am und um den Motorraum oder das Getriebe aufgrund des Risikos von Öl-/Benzinaustritt nicht möglich.''

''Da es vorkommen kann, dass es mehr Interessenten als Plätze gibt, haben wir die folgende Warteliste eingerichtet. Hier sollen sich Mitglieder eintragen, die einen Fahrzeugplatz nutzen wollen. Sobald einer frei geworden ist wird dieser an das am längsten wartende Mitglied in der Warteliste vergeben:''

== Warteliste ==
* Fahrzeugplätze werden für max. 6 Monate vergeben
* kürzere Zeiten sind auch möglich, auf jeden Fall wird direkt beim Einzug das Ende festgehalten
* Wer länger braucht, kann nach Ablauf der Zeit Glück haben und direkt als erster "Wartender" weitermachen oder muss den Platz freimachen und ganz regulär warten, bis ein neuer frei wird
* Wer einen Monat vor Ende der vereinbarten Laufzeit weiß, dass mehr Zeit doch gut wäre, darf sich bereits wieder auf die Liste setzen

{| class="wikitable"
!Platz:
|links
|mittig
|rechts
|-
!genutzt bis:
|''max. 4.12.2025''
|''max. 4.10.2025''
|''max. 1.11.2025''
|-
!aktuell:
|[[Konsti]]
|[[MaKu]]
|[[Mamad]]
|-
!Nachfolge:
|?
|?
|?
|}

Bei Interesse bitte '''hier eintragen''':
* Nidal Saghir (ab Oct od. Nov)

[[Category:Facilities]]
[[Category:Vehicles]]

Waiting Lists

2025-03-08T21:14:42Z

Lepus: /* Laser Cutter Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[User:Edgar|Edgar]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:FMO|Frank]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:Edgar|Edgar]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Edgar|Edgar]]
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:FMO|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*Volker
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:Edgar|Edgar]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Jnafls|Johannnes]]
*[[User:Micha|Micha]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Edgar|Edgar]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Schmidt3D|Mirko Schmidt]]
*Nidal

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD - machine [https://github.com/comakingspace/do-something/issues/305 in commissioning!]

'''Waiting Members:'''
*[[NitramLegov|Martin]]
*[[User:Jakob|Jakob]]
*[[User:Anita|Anita]]
*[[FabianM|Fabian]]
*[[Björn]]
*[[Philip]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Utis|Utis]]
*[[User:Hypernode|Johannes Stegmüller]]
*Nidal

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Jnafls|Johannes]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: TBD

'''Waiting Members:'''
*[[User:FabianM|Fabian]]
*[[User:Baumphil|baumphil]]
*[[User:Ol|Oliver]]
*[[User:FranKNG|Frank K.]]
*[[Volker]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

Waiting Lists

2025-03-08T21:13:24Z

Lepus: /* Sliding Table Saw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[User:Edgar|Edgar]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:FMO|Frank]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:Edgar|Edgar]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Edgar|Edgar]]
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:FMO|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*Volker
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:Edgar|Edgar]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Jnafls|Johannnes]]
*[[User:Micha|Micha]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Edgar|Edgar]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD - machine [https://github.com/comakingspace/do-something/issues/305 in commissioning!]

'''Waiting Members:'''
*[[NitramLegov|Martin]]
*[[User:Jakob|Jakob]]
*[[User:Anita|Anita]]
*[[FabianM|Fabian]]
*[[Björn]]
*[[Philip]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Utis|Utis]]
*[[User:Hypernode|Johannes Stegmüller]]
*Nidal

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Jnafls|Johannes]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: TBD

'''Waiting Members:'''
*[[User:FabianM|Fabian]]
*[[User:Baumphil|baumphil]]
*[[User:Ol|Oliver]]
*[[User:FranKNG|Frank K.]]
*[[Volker]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

Waiting Lists

2022-02-17T20:35:56Z

Lepus: Waiting lists

Waiting Lists

2021-10-05T05:25:34Z

Lepus: /* Chop Saw Introduction */

Waiting Lists

2021-10-01T20:00:04Z

Lepus: /* Jointer-Planer Introduction */

Waiting Lists

2021-10-01T19:58:42Z

Lepus: /* CNC Router Introduction */

Waiting Lists

2021-10-01T19:56:46Z

Lepus: /* Bandsaw Introduction */

Waiting Lists

2021-10-01T19:55:48Z

Lepus: /* Laser Cutter Introduction */