CoMakingSpace Wiki - User Contributions [en]

User:Kalunho

2021-12-05T19:20:06Z

Kalunho:

{{UserInfoBox
|real_name=Kalun
|image=Profile_kalunho.jpg
|expertise=[[3DP|3D printing]], [[Laser Cutting|laser cutting]], [[Raspberry Pi]]
|website=[https://kalunho.com/ www.kalunho.com]
|instagram=kalunho3d
|thingiverse=kalunho3d
|github=kalunho17
}}

My name is Kalun and I'm a student at the University of Mannheim! I was a member of the [https://engineering.uottawa.ca/ceed/design-spaces/makerspace uOttawas makerspace] during my exchange semester in Canada back in 2016. There, I learned everything about 3D printing and laser cutting. I am very happy that I've found Comaking Space and be a part of this community :)

My hobbies are sports, programming and of course "making stuff" using [[3DP|3D printing]]. I share most of my projects on [https://www.youtube.com/c/kalunho YouTube].

== Finished Projects ==

* [[Project:Mechanical_Keyboard]]
* [[Project:Squid Game Mask]]

== Current Projects ==
* 3D Printed Gaming Mouse

* 3D Printed Bike

* [https://www.instructables.com/Bottle-Caps-Pop-Art/ Bottle Caps Pop Art] by cfb70

* [https://www.thingiverse.com/thing:2376150 Caliburn Mag-Fed Pump-Action Nerf Blaster]

* [https://github.com/Ehdrien/Gecko-blaster-instructions Gecko Blaster Nerf]

* [[Project:Magnetic Cat Ear Badge holder]]

User:Kalunho

2021-11-23T00:05:19Z

Kalunho:

User:Kalunho

2021-11-23T00:05:07Z

Kalunho:

User:Kalunho

2021-11-23T00:03:56Z

Kalunho:

User:Kalunho

2021-11-23T00:03:30Z

Kalunho:

{{UserInfoBox
|real_name=Kalun
|image=Profile_kalunho.jpg
|expertise=[[3DP|3D printing]], [[Laser Cutting|laser cutting]], [[Raspberry Pi]]
|website=[https://kalunho.com/ www.kalunho.com]
|instagram=kalunho3d
|thingiverse=kalunho3d
|github=kalunho17
}}

My name is Kalun and I'm a student at the University of Mannheim! I was a member of the [https://engineering.uottawa.ca/ceed/design-spaces/makerspace uOttawas makerspace] during my exchange semester in Canada back in 2016. There, I learned everything about 3D printing and laser cutting. I am very happy that I've found Comaking Space and be a part of this community :)

My hobbies are sports, programming and of course "making stuff" using [[3DP|3D printing]]. I share most of my projects on [https://www.youtube.com/c/kalunho YouTube].

== Finished Projects ==

* [[Project:Mechanical_Keyboard]]
* [[Project:Squid Game Mask]]

== Current Projects ==
* 3D Printed Gaming Mouse

* 3D Printed Bike

* [https://www.instructables.com/Bottle-Caps-Pop-Art/ Bottle Caps Pop Art] by cfb70

* [Caliburn Mag-Fed Pump-Action Nerf Blaster](https://www.thingiverse.com/thing:2376150)

* Cat Ear Card Badge

Project:Squid Game Mask

2021-11-10T10:30:48Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Squid Game Mask
|image=Squid_Game_Mask_1.jpg
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=10-20€ (PLA)
}}

This is a remix of the squid game mask I found on Thingiverse. It allows you to see through the mask since i reduce the thickness of the wall. The mask is printed in two pieces, which are glued together. Furthermore, I used white acrylic color to paint the circle of the mask. Finally, I spray painted the mask with a transparent color to seal the acylic paint. Happy Halloween :)

== Features ==
The main features are:
* See though
* Breathable
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=XBLqhmaZx-c YouTube] channel. The file is available on [https://www.thingiverse.com/thing:5031527 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Squid_Game_Mask_2.JPG|
File:Squid_Game_Mask_3.JPG|
File:Squid_Game_Mask_4.JPG|
File:Squid_Game_Mask_5.JPG|
File:Squid_Game_Mask_6.JPG|
</gallery>

Project:Squid Game Mask

2021-11-08T14:38:33Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Squid Game Mask
|image=Squid_Game_Mask_1.jpg
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=10-20€ (PLA)
}}

This is a remix of the squid game mask I found on Thingiverse. It allows you to see through the mask since i reduce the thickness of the wall. The mask is printed in two pieces, which are glued together. Furthermore, I used white acrylic color to paint the circle of the mask. Finally, I spray painted the mask with a transparent color to seal the acylic paint. Happy Halloween :)

== Features ==
The main features of this keyboard are:
* See though
* Breathable
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=XBLqhmaZx-c YouTube] channel. The file is available on [https://www.thingiverse.com/thing:5031527 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Squid_Game_Mask_2.JPG|My name on the back
File:Squid_Game_Mask_3.JPG|Backside of the keyboard
File:Squid_Game_Mask_4.JPG|Magnetic USB-C adapter
File:Squid_Game_Mask_5.JPG|3D-printed Keycaps
File:Squid_Game_Mask_6.JPG|3D-printed Keycaps
</gallery>

Project:Squid Game Mask

2021-11-08T14:32:34Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Squid Game Mask
|image=Squid_Game_Mask_1.jpg
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=10-20€ (PLA)
}}

This is a remix of the squid game mask I found on Thingiverse. It allows you to see through the mask since i reduce the thickness of the wall. The mask is printed in two pieces, which are glued together. Furthermore, I used white acrylic color to paint the circle of the mask.

== Features ==
The main features of this keyboard are:
* See though
* Breathable
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=XBLqhmaZx-c YouTube] channel. The file is available on [https://www.thingiverse.com/thing:5031527 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Squid_Game_Mask_2.JPG|My name on the back
File:Squid_Game_Mask_3.JPG|Backside of the keyboard
File:Squid_Game_Mask_4.JPG|Magnetic USB-C adapter
File:Squid_Game_Mask_5.JPG|3D-printed Keycaps
File:Squid_Game_Mask_6.JPG|3D-printed Keycaps
</gallery>

Project:Squid Game Mask

2021-11-08T14:32:22Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Squid Game Mask
|image=Squid_Game_Mask_1.jpg
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=20€ (PLA)
}}

This is a remix of the squid game mask I found on Thingiverse. It allows you to see through the mask since i reduce the thickness of the wall. The mask is printed in two pieces, which are glued together. Furthermore, I used white acrylic color to paint the circle of the mask.

== Features ==
The main features of this keyboard are:
* See though
* Breathable
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=XBLqhmaZx-c YouTube] channel. The file is available on [https://www.thingiverse.com/thing:5031527 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Squid_Game_Mask_2.JPG|My name on the back
File:Squid_Game_Mask_3.JPG|Backside of the keyboard
File:Squid_Game_Mask_4.JPG|Magnetic USB-C adapter
File:Squid_Game_Mask_5.JPG|3D-printed Keycaps
File:Squid_Game_Mask_6.JPG|3D-printed Keycaps
</gallery>

Project:Squid Game Mask

2021-11-08T14:31:55Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Squid Game Mask
|image=Squid_Game_Mask_1.jpg
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=60€ (board) + 20€ (Switches) + 20€ (PLA)
}}

This is a remix of the squid game mask I found on Thingiverse. It allows you to see through the mask since i reduce the thickness of the wall. The mask is printed in two pieces, which are glued together. Furthermore, I used white acrylic color to paint the circle of the mask.

== Features ==
The main features of this keyboard are:
* See though
* Breathable
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=XBLqhmaZx-c YouTube] channel. The file is available on [https://www.thingiverse.com/thing:5031527 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Squid_Game_Mask_2.JPG|My name on the back
File:Squid_Game_Mask_3.JPG|Backside of the keyboard
File:Squid_Game_Mask_4.JPG|Magnetic USB-C adapter
File:Squid_Game_Mask_5.JPG|3D-printed Keycaps
File:Squid_Game_Mask_6.JPG|3D-printed Keycaps
</gallery>

Project:Squid Game Mask

2021-11-05T22:42:17Z

Kalunho: Created page with "{{ProjectInfoBox |project title=3D Printed Squid Game Mask |image=Squid_Game_Mask_1.jpg |status=Completed |date=September 05, 2021 |initiator=User:Kalunho |materials=PLA..."

{{ProjectInfoBox
|project title=3D Printed Squid Game Mask
|image=Squid_Game_Mask_1.jpg
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=60€ (board) + 20€ (Switches) + 20€ (PLA)
}}

Text here

== Features ==
The main features of this keyboard are:
* Gasket Mount
* No screws are required
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=XBLqhmaZx-c YouTube] channel. The file is available on [https://www.thingiverse.com/thing:5031527 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Squid_Game_Mask_2.JPG|My name on the back
File:Squid_Game_Mask_3.JPG|Backside of the keyboard
File:Squid_Game_Mask_4.JPG|Magnetic USB-C adapter
File:Squid_Game_Mask_5.JPG|3D-printed Keycaps
File:Squid_Game_Mask_6.JPG|3D-printed Keycaps
</gallery>

File:Squid Game Mask 6.JPG

2021-11-05T22:35:03Z

Kalunho:

File:Squid Game Mask 5.JPG

2021-11-05T22:34:54Z

Kalunho:

File:Squid Game Mask 4.JPG

2021-11-05T22:34:44Z

Kalunho:

File:Squid Game Mask 3.JPG

2021-11-05T22:34:15Z

Kalunho:

File:Squid Game Mask 2.JPG

2021-11-05T22:33:57Z

Kalunho:

File:Squid Game Mask 1.jpg

2021-11-05T22:33:46Z

Kalunho:

User:Kalunho

2021-11-05T22:29:34Z

Kalunho:

Prusa i3 MK2S (1)

2021-10-30T10:11:27Z

Kalunho:

{{MachineInfoBox
|machine name=Original Prusa i3 MK2S
|image=Prusa i3 MK2S.JPG
|synonyms=Prusa i3 MK2 ''(nearly identical)''
|type=3D printer
|material=plastic [[filament]]
|location=[[Location::3D Printer Farm|3D printer farm]]
|access=[[3D Printer Introduction|3D printer introduction]]
|status=see [[3D Printer Farm#Available Printers|list]]
|firmware=https://www.prusa3d.com/drivers/
|software=[[Slic3r]] Prusa Edition
|manual=[http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf prusa3d.com]
|tutors=[[Tutor::User:Mitja|Mitja]], [[Tutor::User:Pakue|Patrick]], [[Tutor::User:Lmnl99|Luca]], [[Tutor::User:Johannes|Johannes]], [[Tutor::User:Lukas|Lukas]], [[Tutor::User:Luzian|Luzian]], [[Tutor::User:NitramLegov|Martin]], [[Tutor::User:Narquadah|Kim]], [[Tutor::User:Kalunho|Kalun]]
}}

The Prusa i3 MK2S is our default 3D printer in the [[3D Printer Farm|3D printer farm]]. We have five of them, named "P1" through "P5".

In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf handbook] and use the latest version of [[Slic3r]] available at the [https://www.prusa3d.com/drivers/ drivers and manuals page].

The build volume of this model is 250{{x}}210{{x}}200 mm.

== Dangers ==
* exposed heated parts - may still be hot if the display is already turned off!
** the print head reaches temperatures up to 230 °C during operation
** the bed reaches temperatures up to 100 °C during operation
* machine parts may rapidly change direction - do not reach in when a print is running!
* machine may keep executing its commands after something went wrong
** every move is based on the initial homing ("zero-ing")
** no sensing of obstacles or current position!

== Maintenance ==
''See [[3D_Printer_Farm#Maintenance]].''
 

== Multi-Material Printer ==
{{MachineInfoBox
|machine name=Original Prusa i3 MK2S Multi Material
|image=MultiMaterialPrinter.JPG
|type=3D printer with multi material support
|material=plastic [[filament]]
|location=[[Location::3D Printer Farm|3D printer farm]]
|access=[[3D Printer Introduction|3D printer introduction]]
|status=see [[3D Printer Farm#Available Printers|list]]
|firmware=https://www.prusa3d.com/drivers/
|software=[[Slic3r]] Prusa Edition
|manual=[https://www.prusa3d.com/downloads/manual/Original-Prusai3-MK2-MM-quickstart.pdf prusa3d.com]
|tutors=[[Tutor::User:Ciaran|Ciaran]]
}}
The printer "P6" has a multi-material upgrade!

In the slicer, please select "Original Prusa i3 MK2 Multi Material" as the printer. 
Please ensure that the filament loaded into the printer matches the settings you have in the slicer, for example like this:
 
[[File:MultiMaterialSlicingExample.png|350px]]

For each part in your model, you can assign a specific extruder. If you import your parts in a single STL file, try marking it and pressing the "Split" button in order to split it into multiple parts (it will for example split it into the bodies from Fusion 360).
Prusa provides a few helpful links for Multi Material Printing: 
[https://manual.prusa3d.com/Guide/Export+model+from+Fusion+360/378?lang=en Export model from Fusion 360] 
[https://manual.prusa3d.com/Guide/Gcode+preparation+for+Multi+Material+v2.0/424?lang=en Gcode Preparation for Multi Material v 2.0] 
[https://manual.prusa3d.com/Guide/Splitting+STL+using+MeshMixer/403?lang=en Splitting STL using MeshMixer] 
[https://manual.prusa3d.com/Guide/Splitting+STL+with+single+compact+part/380?lang=en Splitting STL with single compact part] 
Please read them while preparing for your first print. 
In case you have a specific support Material (e.g. Soluble support), please see the settings at: Print Settings --> Multiple Extruders.
Please note that Multi Material printing takes much longer than regular printing. After you exported the GCode, you can see the estimated printing time in the lower right corner.

[[Category:3D Printing]]

Waiting Lists

2021-09-20T08:19:50Z

Kalunho:

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: Prusa_i3_MK2S
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:DANIEL BULTRINI|Daniel]]
* PaulW
* JuliaWe

==[[Arc Welding Introduction]]==

Tutors: {{#show: Welding_Transformer
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* PaulW

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2021-9-17, 20:00

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Ozel|Oliver]] (would be interested to become a tutor later, but I'm not an expert in band saws at the moment)
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
* [[User:PaulW|PaulW]]

== [[Chop Saw Introduction]] ==
Tutors:Tutors: {{#show: Chop_Saw
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:Sebastian|Sebastian]]
* [[User:BenKenobi|BenKenobi]]
* [[User:HoerstJ|HoerstJ]]
* PaulW

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC_Router
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:F.Huchinson|F.Huchinson]]
* [[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Gregor|Gregor]]
* [[User:Ed_Green]]
* [[User:Ozel|Oliver]]
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:DANIEL BULTRINI|Daniel]]
* PaulW
* [[User:Kalunho|Kalun]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld_Router
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

*[[User:Andreas|Andreas]]
*[[User:BenKenobi|BenKenobi]]
*PaulW

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: TBD

'''Waiting Members:'''

* [[eileen]]
* [[User:Christoph|Christoph]]
* [[User:Gregor|Gregor]]
* [[User:Narquadah|Kim]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:BenKenobi|BenKenobi]]
* [[User:F.Huchinson|F.Huchinson]]
* [[User:HoerstJ|HoerstJ]]
* [[User:Mfisch3r|Markus]]
* PaulW

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser_Cutter
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

[[User:Sebastian|Sebastian]] would like to become a tutor!

'''Waiting Members:'''

* [[User:Blacksheep|Micha]]
* [[User:Gregor|Gregor]]
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:Kalunho|Kalun]]
* [[User:F.Huchinson|F.Huchinson]]
* PaulW

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal_Lathes
|?Tutor
| format=ul
}}

Time Required: To be determined

Next Date: TBD - waiting for completion of the electrics ([https://github.com/comakingspace/do-something/issues/196 #196])

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Leo|Leo]] (I am offering a sixpack of beer, lemmonade or similar beverages of choice for a introduction!)
* [[User:Lmnl99|Luca]]
* [[User:Blacksheep|Micha]]
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table_Saw
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD (last: 2021-7-14)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Kalunho|Kalun]]
* [[User:BenKenobi|BenKenobi]]
* [[User:HoerstJ|HoerstJ]]
* PaulW

==[[Woodturning Introduction]]==

Tutors: {{#show: Wood_Lathe
|?Tutor
| format=ul
}}
Time required: ~ 2 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Utis|Utis]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:Andreas|Andreas]]
* [[User:Sebastian|Sebastian]]
* [[User:Kalunho|Kalun]]
* [[User:BenKenobi|BenKenobi]]

Project:Mechanical Keyboard

2021-09-16T09:39:45Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Mechanical Keyboard
|image=Keyboard_1.JPG
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=60€ (board) + 20€ (Switches) + 20€ (PLA)
}}

I designed this custom mechanical keyboard case including the keycaps. The PCB I used for this project is the [https://keygem.store/collections/pcb/products/dz60rgb-v2-hot-swap-mechanical-keyboard-pcb DZ60rgb v3] hot-swappable, therefore no soldering is required. I personally like small and compact keyboards, that is why I choose a 60% layout. The PCB is configured via [https://config.qmk.fm/#/ QMK], which allows you to pretty much re-programm all the keys. For this build, I have also added four small white LEDs on the back, which I soldered directly on the board (there is a 5v output pin somewhere on the board). These four LEDs are static and cannot be controlled via the software and light up as soon as you plug your USB-C cable in the keyboard.
One 750g spool of regular PLA should be more than enough to print this keyboard.

== Features ==
The main features of this keyboard are:
* Gasket Mount
* No screws are required
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=ilK-Wx_Bp7w YouTube] channel. The file is available on [https://www.thingiverse.com/thing:4948525 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Keyboard_2.JPG|My name on the back
File:Keyboard_3.JPG|Backside of the keyboard
File:Keyboard_4.JPG|Magnetic USB-C adapter
File:Keyboard_5.JPG|3D-printed Keycaps
</gallery>

User:Kalunho

2021-09-16T09:37:02Z

Kalunho:

{{UserInfoBox
|real_name=Kalun
|image=Profile_kalunho.jpg
|expertise=[[3DP|3D printing]], [[Laser Cutting|laser cutting]], [[Raspberry Pi]]
|website=[https://kalunho.com/ www.kalunho.com]
|instagram=kalunho3d
|thingiverse=kalunho3d
|github=kalunho17
}}

My name is Kalun and I'm a student at the University of Mannheim! I was a member of the [https://engineering.uottawa.ca/ceed/design-spaces/makerspace uOttawas makerspace] during my exchange semester in Canada back in 2016. There, I learned everything about 3D printing and laser cutting. I am very happy that I've found Comaking Space and be a part of this community :)

My hobbies are sports, programming and of course "making stuff" using [[3DP|3D printing]]. I share most of my projects on [https://www.youtube.com/c/kalunho YouTube].

== Finished Projects ==

* [[Project:Mechanical_Keyboard]]

== Current Projects ==
* [https://www.thingiverse.com/thing:3626084 WRLS (Water Rocket Launch System)]

* [https://www.instructables.com/Bottle-Caps-Pop-Art/ Bottle Caps Pop Art] by cfb70

Project:Mechanical Keyboard

2021-09-16T00:12:19Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Mechanical Keyboard
|image=Keyboard_1.JPG
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=60€ (board) + 20€ (Switches) + 20€ (PLA)
}}

I designed this custom mechanical keyboard case including the keycaps. The PCB I used for this project is the [https://keygem.store/collections/pcb/products/dz60rgb-v2-hot-swap-mechanical-keyboard-pcb DZ60rgb v3] hot-swappable, therefore no soldering is required. I personally like small and compact keyboards, that is why I choose a 60% layout. The PCB is configured via [https://config.qmk.fm/#/ QMK], which allows you to pretty much re-programm all the keys. For this build, I have also added four small white LEDs, which I soldered directly on the board (there is a 5v output pin somewhere on the board). These four LEDs are static and cannot be controlled via the software and light up as soon as you plug your USB-C cable in the keyboard.
One 750g spool of regular PLA should be more than enough to print this keyboard.

== Features ==
The main features of this keyboard are:
* Gasket Mount
* No screws are required
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=ilK-Wx_Bp7w YouTube] channel. The file is available on [https://www.thingiverse.com/thing:4948525 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150>
File:Keyboard_2.JPG|My name on the back
File:Keyboard_3.JPG|Backside of the keyboard
File:Keyboard_4.JPG|Magnetic USB-C adapter
File:Keyboard_5.JPG|3D-printed Keycaps
</gallery>

Project:Mechanical Keyboard

2021-09-16T00:11:35Z

Kalunho:

{{ProjectInfoBox
|project title=3D Printed Mechanical Keyboard
|image=Keyboard_1.JPG
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=60€ (board) + 20€ (Switches) + 20€ (PLA)
}}

I designed this custom mechanical keyboard case including the keycaps. The PCB I used for this project is the [https://keygem.store/collections/pcb/products/dz60rgb-v2-hot-swap-mechanical-keyboard-pcb DZ60rgb v3] hot-swappable, therefore no soldering is required. I personally like small and compact keyboards, that is why I choose a 60% layout. The PCB is configured via [https://config.qmk.fm/#/ QMK], which allows you to pretty much re-programm all the keys. For this build, I have also added four small white LEDs, which I soldered directly on the board (there is a 5v output pin somewhere on the board). These four LEDs are static and cannot be controlled via the software and light up as soon as you plug your USB-C cable in the keyboard.
One 750g spool of regular PLA should be more than enough to print this keyboard.

== Features ==
The main features of this keyboard are:
* Gasket Mount
* No screws are required
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=ilK-Wx_Bp7w YouTube] channel. The file is available on [https://www.thingiverse.com/thing:4948525 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150 caption="Photos">
File:Keyboard_2.JPG|My name on the back
File:Keyboard_3.JPG|Backside of the keyboard
File:Keyboard_4.JPG|Magnetic USB-C adapter
File:Keyboard_5.JPG|3D-printed Keycaps
</gallery>

Project:Mechanical Keyboard

2021-09-16T00:10:43Z

Kalunho:

{{ProjectInfoBox
|project title=Wax Cloth to Wrap Food
|image=Keyboard_1.JPG
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=60€ (board) + 20€ (Switches) + 20€ (PLA)
}}

I designed this custom mechanical keyboard case including the keycaps. The PCB I used for this project is the [https://keygem.store/collections/pcb/products/dz60rgb-v2-hot-swap-mechanical-keyboard-pcb DZ60rgb v3] hot-swappable, therefore no soldering is required. I personally like small and compact keyboards, that is why I choose a 60% layout. The PCB is configured via [https://config.qmk.fm/#/ QMK], which allows you to pretty much re-programm all the keys. For this build, I have also added four small white LEDs, which I soldered directly on the board (there is a 5v output pin somewhere on the board). These four LEDs are static and cannot be controlled via the software and light up as soon as you plug your USB-C cable in the keyboard.
One 750g spool of regular PLA should be more than enough to print this keyboard.

== Features ==
The main features of this keyboard are:
* Gasket Mount
* No screws are required
* fully 3D printable

== Tutorial / Download ==
A full tutorial is available on my [https://www.youtube.com/watch?v=ilK-Wx_Bp7w YouTube] channel. The file is available on [https://www.thingiverse.com/thing:4948525 thingiverse].

== Photos==

<gallery mode=packed-hover heights=150 caption="Photos">
File:Keyboard_2.JPG|My name on the back
File:Keyboard_3.JPG|Backside of the keyboard
File:Keyboard_4.JPG|Magnetic USB-C adapter
File:Keyboard_5.JPG|3D-printed Keycaps
</gallery>

Project:Mechanical Keyboard

2021-09-16T00:05:24Z

Kalunho:

{{ProjectInfoBox
|project title=Wax Cloth to Wrap Food
|image=Keyboard_1.JPG
|status=Completed
|date=September 05, 2021
|initiator=[[User:Kalunho]]
|materials=[[PLA]]
|tools=[[3D Printer|3D printer]]
|software=[https://www.tinkercad.com Tinkercad], [https://www.blender.org Blender], [https://www.meshmixer.com Meshmixer]
|cost=60€ (board) + 20€ (Switches) + 20€ (PLA)
}}

I designed this custom mechanical keyboard case including the keycaps. The PCB I used for this project is the [https://keygem.store/collections/pcb/products/dz60rgb-v2-hot-swap-mechanical-keyboard-pcb DZ60rgb v3] hot-swappable, therefore no soldering is required. I personally like small and compact keyboards, that is why I choose a 60% layout. The PCB is configured via [https://config.qmk.fm/#/ QMK], which allows you to pretty much re-programm all the keys. For this build, I have also added four small white LEDs, which I soldered directly on the board (there is a 5v output pin somewhere on the board). These four LEDs are static and cannot be controlled via the software and light up as soon as you plug your USB-C cable in the keyboard.
One 750g spool of regular PLA should be more than enough to print this keyboard.

== Features ==
The main features of this keyboard are:
* Gasket Mount
* No screws are required
* fully 3D printable

== Photos==

<gallery mode=packed-hover heights=150 caption="assembly steps">
File:Keyboard_1.JPG|A
File:Keyboard_2.JPG|B
File:Keyboard_3.JPG|C
File:Keyboard_4.JPG|D
File:Keyboard_5.JPG|E
File:Keyboard_6.JPG|F
</gallery>

Project:Mechanical Keyboard

2021-09-15T19:56:16Z

Kalunho: Created page with "{{ProjectInfoBox |project title=Wax Cloth to Wrap Food |image=Keyboard_1.JPG |status=Completed |date=September 05, 2021 |initiator=User:Kalunho |materials=PLA |tools=[..."

File:Keyboard 6.JPG

2021-09-15T19:46:26Z

Kalunho:

File:Keyboard 5.JPG

2021-09-15T19:46:17Z

Kalunho:

File:Keyboard 4.JPG

2021-09-15T19:46:08Z

Kalunho:

File:Keyboard 3.JPG

2021-09-15T19:45:59Z

Kalunho:

File:Keyboard 2.JPG

2021-09-15T19:45:50Z

Kalunho:

File:Keyboard 1.JPG

2021-09-15T19:45:29Z

Kalunho:

User:Kalunho

2021-09-15T19:42:44Z

Kalunho:

{{UserInfoBox
|real_name=Kalun
|image=Profile_kalunho.jpg
|expertise=[[3DP|3D printing]], [[Laser Cutting|laser cutting]], [[Raspberry Pi]]
|website=[https://kalunho.com/ www.kalunho.com]
|instagram=kalunho3d
|thingiverse=kalunho3d
}}

My name is Kalun and I'm a student at the University of Mannheim! I was a member of the [https://engineering.uottawa.ca/ceed/design-spaces/makerspace uOttawas makerspace] during my exchange semester in Canada back in 2016. There, I learned everything about 3D printing and laser cutting. I am very happy that I've found Comaking Space and be a part of this community :)

My hobbies are sports, programming and of course "making stuff" using [[3DP|3D printing]]. I share most of my projects on [https://www.youtube.com/c/kalunho YouTube].

== Finished Projects ==

* [[Project:Mechanical_Keyboard]]

== Current Projects ==
* [https://www.thingiverse.com/thing:3626084 WRLS (Water Rocket Launch System)]

* [https://www.instructables.com/Bottle-Caps-Pop-Art/ Bottle Caps Pop Art] by cfb70

Waiting Lists

2021-09-01T14:03:04Z

Kalunho:

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: Prusa_i3_MK2S
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Karel|Karel]]
* [[User:Andreas|Andreas]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:DANIEL BULTRINI|Daniel]]
* [[User:Kalunho|Kalun]]

==[[Arc Welding Introduction]]==

Tutors: {{#show: Welding_Transformer
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:Karel|Karel]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Micha]]
* [[User:Ploenk]]
* [[User:Karel|Karel]]
* [[User:Utis|Utis]]
* [[User:Ozel|Oliver]] (would be interested to become a tutor later, but I'm not an expert in band saws at the moment)
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]

== [[Chop Saw Introduction]] ==
Tutors:Tutors: {{#show: Chop_Saw
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:Karel|Karel]]
* [[User:Sebastian|Sebastian]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC_Router
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:F.Huchinson|F.Huchinson]]
* [[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Mfisch3r|Markus]]
* [[User:Karel|Karel]]
* [[User:St3ffi|Steffi]]
* [[User:Gregor|Gregor]]
* [[User:Ed_Green]]
* [[User:Paul]]
* [[User:Ozel|Oliver]]
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:DANIEL BULTRINI|Daniel]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Karel|Karel]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld_Router
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

*[[User:F.Huchinson]]
*[[User:Paul]]
*[[User:Andreas|Andreas]]
*[[User:AlexBaumgart|AlexBaumgart]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer
|?Tutor
| format=ul
}}

Time required: 60min + 30min per member

Next Date: TBD

'''Waiting Members:'''

* [[eileen]]
* [[User:Blacksheep|Micha]]
* [[User:Karel|Karel]]
* [[User:Christoph|Christoph]]
* [[User:Gregor|Gregor]]
* [[User:Keno|Keno]]
* [[User:Narquadah|Kim]]
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser_Cutter
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

* [[User:Blacksheep|Micha]]
* [[User:Gregor|Gregor]]
* [[User:Ozel|Oliver]]
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Kalunho|Kalun]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal_Lathes
|?Tutor
| format=ul
}}

Time Required: To be determined

Next Date: TBD - waiting for completion of the electrics ([https://github.com/comakingspace/do-something/issues/196 #196])

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Leo|Leo]] (I am offering a sixpack of beer, lemmonade or similar beverages of choice for a introduction!)
* [[User:Lmnl99|Luca]]
* [[User:Blacksheep|Micha]]
* [[User:Karel|Karel]]
* [[User:Andreas|Andreas]]
* [[User:AlexBaumgart|AlexBaumgart]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table_Saw
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD (last: 2021-7-14)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Kalunho|Kalun]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Wood_Lathe
|?Tutor
| format=ul
}}
Time required: ~ 2 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Utis]]
* [[User:Karel|Karel]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:Andreas|Andreas]]
* [[User:Sebastian|Sebastian]]
* [[User:Kalunho|Kalun]]

User:Kalunho

2021-08-31T10:05:17Z

Kalunho:

{{UserInfoBox
|real_name=Kalun
|image=Profile_kalunho.jpg
|expertise=[[3DP|3D printing]], [[Laser Cutting|laser cutting]], [[Raspberry Pi]]
|website=[https://kalunho.com/ www.kalunho.com]
|instagram=kalunho3d
|thingiverse=kalunho3d
}}

My name is Kalun and I'm a student at the University of Mannheim! I was a member of the [https://engineering.uottawa.ca/ceed/design-spaces/makerspace uOttawas makerspace] during my exchange semester in Canada back in 2016. There, I learned everything about 3D printing and laser cutting. I am very happy that I've found Comaking Space and be a part of this community :)

My hobbies are sports, programming and of course "making stuff" using [[3DP|3D printing]]. I share most of my projects on [https://www.youtube.com/c/kalunho YouTube].

== Current Projects ==
* [https://www.thingiverse.com/thing:3626084 WRLS (Water Rocket Launch System)]

* Improved version of my [https://www.thingiverse.com/thing:4838335 Mechanical Keyboard Case]

* [https://www.instructables.com/Bottle-Caps-Pop-Art/ Bottle Caps Pop Art] by cfb70

User:Kalunho

2021-08-29T19:56:40Z

Kalunho: Created page with "{{UserInfoBox |real_name=Kalun |image=Profile_kalunho.jpg |expertise=3D printing, laser cutting, Raspberry Pi |website=[https://kalunho.com/ www...."

{{UserInfoBox
|real_name=Kalun
|image=Profile_kalunho.jpg
|expertise=[[3DP|3D printing]], [[Laser Cutting|laser cutting]], [[Raspberry Pi]]
|website=[https://kalunho.com/ www.kalunho.com]
|instagram=kalunho3d
|thingiverse=kalunho3d
}}

My name is Kalun and I'm a student at the University of Mannheim! I was a member of the [https://engineering.uottawa.ca/ceed/design-spaces/makerspace uOttawas makerspace] during my exchange semester in Canada back in 2016. There, I learned everything about 3D printing and laser cutting. I am very happy that I've found Comaking Space and be a part of this community :)

My hobbies are sports, programming and of course "making stuff" using [[3DP|3D printing]]. I share most of my projects on [https://www.youtube.com/c/kalunho YouTube].

== Current Projects ==

* Improved version of my [https://www.thingiverse.com/thing:4838335 Mechanical Keyboard Case]

* [https://www.instructables.com/Bottle-Caps-Pop-Art/ Bottle Caps Pop Art] by cfb70

File:Profile kalunho.jpg

2021-08-29T19:17:44Z

Kalunho: