CoMakingSpace Wiki - User Contributions [en]

Woodturning Blanks

2022-11-23T12:56:51Z

Jrosy: /* Bowl Blanks */

[[File:softwood spindle blanks.JPG|thumb|200px|spindle blanks cut from various [[softwood]] scraps - good for practicing (e.g. [[Project:File Handles|file handles]]), but not suited for [[Project:Captive Ring Turning|complex shapes]]]]
In any [[woodturning]] project, you will start out with a "blank". Those can often be quite small and reclaimed from (free) [[Scrap Wood|scrap wood]]! Some even ''literally'' grow on trees, but often you'll need to make some preparations before actually starting to turn.

[[File:center finder on log.JPG|thumb|200px|using a [[3DP|3D printed]] "center finder" to estimate the center of a not exactly round apple log]]
[[File:hook tool 3.JPG|thumb|200px|a [[brace]] is very useful to pre-drill the center hole so the lathe's center does not split the wood]]
In general, you should look for an '''even grain structure''' and '''avoid knots''' for easier turning. Single flawless pieces are optimal, but with some experience you can also try to fill cracks with a suitable [[resin]] or turn carefully arranged & glued "segmented" blanks. Whatever you end up doing, make sure to '''estimate the center''' of the blank as closely as you can to reduce unwanted forces and unneccessary waste of material!

The more unneeded wood you can remove ''before'' turning, the better! Octagonal blanks are relatively easy to make in most cases, and the extra sawing steps are quickly worth it at larger diameters.

Contrary to many other [[woodworking]] techniques, a bit how much? of '''moisture''' (or even "green" wood) can be helpful when turning. Very dry, hard woods (e.g. beech table leg used for some [[Project:Tigerente|Tigerente]] wheels) can be hard to cut and produces small chips rather than nice, smooth shavings.

== Wood Species ==
Very soft wood, like fir/spruce, is actually NOT easy to turn, you'll often get tear-out instead of nicely shaven surfaces (similar to planing these woods). So while it's good to start "soft" to understand catches & [[Woodturning Tools|tool]] angles, prepare yourself to acquire some higher-quality wood for your take-home projects.

[[Lukas]] made very positive experiences with [[Project:Drying Timber|self-dried]] '''apple''' logs, but (cheap) birch logs do not turn much better than [[softwoods]] because they are grown too fast.

Micha has tried plane ''(Platane)'' and hated it, but is often seen in the Space happily turning '''maple'''.

== Spindle Blanks ==
[[File:composite woodturning blank.JPG|thumb|300 px|lots of material can be saved by gluing together different sections - e.g. to have a larger blank thickness only where needed]]
Spindle blanks ''(Kanteln)'', i.e. those you would turn lengthwise (and often between centers), ideally have a straight grain along the spindle.

The diameter of these is often quite small and you'll get away with a square blank.

Tree branches and small logs also make great spindle blanks if they're not too curvy!

=== Cutting Square Blanks ===
<gallery widths=200>
File:squaring up 1.JPG|step 1: use the narrower width of your stock to set the [[Table Saw|table saw's]] parallel fence
File:squaring up 2.JPG|step 2: lay your stock flat and cut it along its wider width
</gallery>

=== Glued Spindle Blanks ===
When your stock is too thin for the work you have planned, you can glue two pieces together - just make sure to have them in the right orientation so the bond won't crack due to the wood "working" later on!

''Very'' schematic grain constellations that should work: [http://www.holzwerken.net/Wissen/Tipps-Tricks/Drechseln/Spurloses-Verleimen-von-Langholz]
* ''')(''' (might open in the center, but not visibly)
* '''=='''
* '''//'''
* NOT ()
* NOT =/ (or any other mix of different cuts)

Have a look at the ''somewhat'' more sophisticated [http://www.holzwerken.net/Wissen/Tipps-Tricks/Drechseln/Spurloses-Verleimen-von-Langholz illustrations on HolzWerken.net] if this doesn't make sense ;-)

 

== Bowl Blanks ==
''We now have a [[Tyme Avon|wood lathe capable of serious bowl turning]] ! Here we can start to collect information on bowl blanks''

starting points:
* [https://www.woodmagazine.com/materials-guide/lumber/from-trees-to-turning-blanks "From Trees to Turning Blanks"] (WOOD Magazine)

== Sourcing ==
If you do not want to make your own blanks or, perhaps more likely, don't have the proper kind of wood at hand, you can buy blanks at numerous stores. Just do a quick online search for "Drechselholz", "Drechsel Kantel" or "Drechsel Rohling" and you should find what you need! As usual, please share your experience if you try out a shop :-)

[[Category:Methods]]
[[Category:Woodturning]]

Waiting Lists

2022-02-18T20:32:45Z

Jrosy: /* Woodturning Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:MartinSte|Steven]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Woodkid|Lukas Mathur]]
* [[User:Canastaking]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]

Waiting Lists

2022-02-18T20:32:04Z

Jrosy: /* Handheld Router Introduction */

Waiting Lists

2022-02-18T20:31:45Z

Jrosy: /* CNC Router Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:MartinSte|Steven]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Woodkid|Lukas Mathur]]
* [[User:Canastaking]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]

Waiting Lists

2022-02-18T20:31:08Z

Jrosy: /* Bandsaw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:MartinSte|Steven]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Woodkid|Lukas Mathur]]
* [[User:Canastaking]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]

Waiting Lists

2022-02-18T20:29:46Z

Jrosy: /* Jointer-Planer Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:MartinSte|Steven]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Woodkid|Lukas Mathur]]
* [[User:Canastaking]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]