CoMakingSpace Wiki - User Contributions [en]

Projects

2026-07-17T17:43:39Z

Finno: /* Gallery */ That didnt work.... again

Don't be afraid to share what you're making! There are [https://electronut.in/why-how-document-project/ many good reasons to document your projects], for instance giving back to the [[community]] you've learned so much from. You never know, even the smallest bit of information might help someone who is completely stuck in a similar project - or maybe an interesting [http://www.instructables.com/contest/ contest] pops up and you'll already have everything ready to join...

To create a project page, simply '''begin the page title with''' <code>Project:</code> - it will then '''automatically appear on this page'''. Please add a "[[ProjectInfoBox]]" as well to improve the linking of pages and maintain a principal structure. Below is a {{NavGal}} containing every project page with such an InfoBox!

__TOC__

== Quick Projects ==
Instructions that will quickly enable you to produce a result - great for beginners! Check out [[:Category:Quick Projects|"Category:Quick Projects"]].

== Gallery ==
''Here are all our projects with a [[ProjectInfoBox]] ''
{{#ask: [[Project:+]]
| ?Has image
| ?Has caption
| format=gallery
| navigation=auto
| imageproperty=Has image
| captionproperty=Has caption
| sort=Has caption

| widths = 300
| limit=500
}}

== All Projects ==
{{Special:AllPages/Project:}}

Projects

2026-07-17T17:43:02Z

Finno: /* Gallery */ Part of an attempt to get Image - Project redirects working

Don't be afraid to share what you're making! There are [https://electronut.in/why-how-document-project/ many good reasons to document your projects], for instance giving back to the [[community]] you've learned so much from. You never know, even the smallest bit of information might help someone who is completely stuck in a similar project - or maybe an interesting [http://www.instructables.com/contest/ contest] pops up and you'll already have everything ready to join...

To create a project page, simply '''begin the page title with''' <code>Project:</code> - it will then '''automatically appear on this page'''. Please add a "[[ProjectInfoBox]]" as well to improve the linking of pages and maintain a principal structure. Below is a {{NavGal}} containing every project page with such an InfoBox!

__TOC__

== Quick Projects ==
Instructions that will quickly enable you to produce a result - great for beginners! Check out [[:Category:Quick Projects|"Category:Quick Projects"]].

== Gallery ==
''Here are all our projects with a [[ProjectInfoBox]] ''
{{#ask: [[Project:+]]
| ?Has image
| ?Has caption
| format=gallery
| navigation=auto
| imageproperty=Has image
| captionproperty=Has caption
| sort=Has caption
| redirects=Has caption
| widths = 300
| limit=500
}}

== All Projects ==
{{Special:AllPages/Project:}}

Property:Has image

2026-07-17T17:38:41Z

Finno: Part of another attempt to get the projects gallery to link pages through images

This property is of type [[Has type::Page]].

Projects

2026-07-17T17:09:28Z

Finno: /* Gallery */ that didnt work

Projects

2026-07-17T17:08:40Z

Finno: /* Gallery */ attempt 2 - Image linking

Don't be afraid to share what you're making! There are [https://electronut.in/why-how-document-project/ many good reasons to document your projects], for instance giving back to the [[community]] you've learned so much from. You never know, even the smallest bit of information might help someone who is completely stuck in a similar project - or maybe an interesting [http://www.instructables.com/contest/ contest] pops up and you'll already have everything ready to join...

To create a project page, simply '''begin the page title with''' <code>Project:</code> - it will then '''automatically appear on this page'''. Please add a "[[ProjectInfoBox]]" as well to improve the linking of pages and maintain a principal structure. Below is a {{NavGal}} containing every project page with such an InfoBox!

__TOC__

== Quick Projects ==
Instructions that will quickly enable you to produce a result - great for beginners! Check out [[:Category:Quick Projects|"Category:Quick Projects"]].

== Gallery ==
''Here are all our projects with a [[ProjectInfoBox]] ''
{{#ask: [[Project:+]]
| ?Has image
| ?Has caption
| format=gallery
| navigation=auto
| imageproperty=Has image
| captionproperty=Has caption
| sort=Has caption
| redirects=Has caption
| widths = 300
| limit=500
}}

== All Projects ==
{{Special:AllPages/Project:}}

Projects

2026-07-17T16:59:03Z

Finno: /* Gallery */ Attempting image linking again

Don't be afraid to share what you're making! There are [https://electronut.in/why-how-document-project/ many good reasons to document your projects], for instance giving back to the [[community]] you've learned so much from. You never know, even the smallest bit of information might help someone who is completely stuck in a similar project - or maybe an interesting [http://www.instructables.com/contest/ contest] pops up and you'll already have everything ready to join...

To create a project page, simply '''begin the page title with''' <code>Project:</code> - it will then '''automatically appear on this page'''. Please add a "[[ProjectInfoBox]]" as well to improve the linking of pages and maintain a principal structure. Below is a {{NavGal}} containing every project page with such an InfoBox!

__TOC__

== Quick Projects ==
Instructions that will quickly enable you to produce a result - great for beginners! Check out [[:Category:Quick Projects|"Category:Quick Projects"]].

== Gallery ==
''Here are all our projects with a [[ProjectInfoBox]] ''
{{#ask: [[Project:+]]
| ?Has image
| ?Has caption
| format=gallery
| navigation=auto
| imageproperty=Has image
| captionproperty=Has caption
| sort=Has caption
| link=subject
| widths = 300
| limit=500
}}

== All Projects ==
{{Special:AllPages/Project:}}

Projects

2026-07-15T05:54:01Z

Finno: /* Gallery */ attempts didnt work. Will try again later

Projects

2026-07-15T05:51:29Z

Finno: /* Gallery */ Try again - image links

Don't be afraid to share what you're making! There are [https://electronut.in/why-how-document-project/ many good reasons to document your projects], for instance giving back to the [[community]] you've learned so much from. You never know, even the smallest bit of information might help someone who is completely stuck in a similar project - or maybe an interesting [http://www.instructables.com/contest/ contest] pops up and you'll already have everything ready to join...

To create a project page, simply '''begin the page title with''' <code>Project:</code> - it will then '''automatically appear on this page'''. Please add a "[[ProjectInfoBox]]" as well to improve the linking of pages and maintain a principal structure. Below is a {{NavGal}} containing every project page with such an InfoBox!

__TOC__

== Quick Projects ==
Instructions that will quickly enable you to produce a result - great for beginners! Check out [[:Category:Quick Projects|"Category:Quick Projects"]].

== Gallery ==
''Here are all our projects with a [[ProjectInfoBox]] ''
{{#ask: [[Project:+]]
| ?Has image
| ?Has caption
| format=gallery
| navigation=auto
| imageproperty=Has image
| captionproperty=Has caption
| sort=Has caption
| linktarget=Has caption

| widths = 300
| limit=500
}}

== All Projects ==
{{Special:AllPages/Project:}}

Projects

2026-07-15T05:47:26Z

Finno: /* Gallery */ Trying to fix image links

Don't be afraid to share what you're making! There are [https://electronut.in/why-how-document-project/ many good reasons to document your projects], for instance giving back to the [[community]] you've learned so much from. You never know, even the smallest bit of information might help someone who is completely stuck in a similar project - or maybe an interesting [http://www.instructables.com/contest/ contest] pops up and you'll already have everything ready to join...

To create a project page, simply '''begin the page title with''' <code>Project:</code> - it will then '''automatically appear on this page'''. Please add a "[[ProjectInfoBox]]" as well to improve the linking of pages and maintain a principal structure. Below is a {{NavGal}} containing every project page with such an InfoBox!

__TOC__

== Quick Projects ==
Instructions that will quickly enable you to produce a result - great for beginners! Check out [[:Category:Quick Projects|"Category:Quick Projects"]].

== Gallery ==
''Here are all our projects with a [[ProjectInfoBox]] ''
{{#ask: [[Project:+]]
| ?Has image
| ?Has caption
| format=gallery
| navigation=auto
| imageproperty=Has image
| captionproperty=Has caption
| sort=Has caption
| link=subject

| widths = 300
| limit=500
}}

== All Projects ==
{{Special:AllPages/Project:}}

User:Finno

2026-06-27T10:16:21Z

Finno: /* Sometimes 2 heads are better than 1 */

{{UserInfoBox
|real_name= Adam Finnerty (User=Finno)
|pronouns=He/ Him|image=Adam Finnerty.JPG
|expertise= I am a generalist.
You should take my advice, I'm not using it.
|interests= All things design, making, learning.
Having conversations with others.

|github=Finno-123
|telegram=@Finno_123
}}

== Hello, It's Me ;) ==
If you are curious about anything that I have posted here, You can;

<div style="column-count:2">
*'''Talk to me Digitally'''
**[[User talk:Finno|talk page]]
**[mailto:alfinnerty@gmail.com email me]
**Telegram
*'''Check me out ;P'''
**[https://www.youtube.com/@adamf302 Youtube]
**[[User:Finno|<small>This Wiki Page</small>]]
**When I am at the space come say Hi
</div>

== Summary of me ==
I joined the space in September 2023 to meet new people and learn from them, as well as to scratch the Making itch, since I had to leave my small shed workshop in Ireland.

A lot of my projects start and take a lot longer than expected becasue I had no idea what I was getting myself into. I learn a lot and then eventually (kind of) finish the project.

I have a background in all things crafts, making and design, and hope to be able to learn from others and share the limited knowledege that I have aswell.

== Projects ==
The projects I take on will be very varied. It could be anything from furniture and decoration for my new apartment or projects to try something I have never done before (almost everything).

I will often '''mix''' areas and interests, so some of the things I post might not ''just be'' making. Some projects might be only design, some might be baking or cooking related. I don't really know, but we will find out :)

Almost everything I post will just be for inspiration.

If you choose to try something for yourself, I will be happy to talk to you about my experience, but I am in no way an expert at anything and this should be well understood.
------------
=== Ideas <small>(will they ever be more than that?)</small> ===

<div style="column-count:3">
*Chess Board
*Chess Pieces
*Scrollsaw Art
*Veneer Stuff
*Vacuume Forming stuff
*Electro plating stuff
*String Art
*Prop-Making
*Wooden toys
*Christmas Decorations
*Dead Blow Hammer/ Mallet
*Round Mallet
*Rolling Pin
*Storage box icons/ labeling
*Keepsake/ Jewlery box
*Hook and Ring game
*Key Organiser - 'Swiss army key'
*Air Hockey Table
*Screen Printing things
*Letterpress things
*Plastic recycling/ injection molding things
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Started, But not really finished... yet...</div>
<div class="mw-collapsible-content">
*Cornhole Game
*Altering/ Sewing Clothes
*Woodturned Pens/ Pencils
</div></div>
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Made it to reality</div>
<div class="mw-collapsible-content">
*Entry way table
*Shoe racks
*Mirror Cabinet extra shelves
*Foiling Projects
*Ultimate Frisbee Disc Holder/clip
</div></div>
</div>


--------------

=== Stuff I am Doing ===
<gallery heights="200" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Finished Pen.jpeg|link=[[Project:Pen Turning]]|Pen Turning

</gallery>
-----------

=== Stuff I have made <small>(Here, There & Everywhere)</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Member wall poster.jpg|link=[[Project:Foiling]]|''Foiling''
File:21. Finsihed rack.jpg|link=[[Project:Basement Boot Rack]]|''Basment Boot Rack''
File:SS of digital modeljpg.png|link=[[Project:Mirrorshelf]]|Bathroom Mirror Shelf
File:Slide Box.jpg|link=[[Project:BonBons]]|''Bonbons & Boxes''
File:Old Attempt.jpg|''First attempt at BonBons, using an icecube mold''
File:Truffles 2019.jpg|''Truffles I made in large quantity's over a couple of days and boxed with a menu card I designed''
File:Woodturned Wineglass Stems.jpg|Woodturned new stems for some Crystal glasses that my grandad liked.
File:PXL 20231101 101802194.jpg|link=https://www.thingiverse.com/thing:721578 |''Tourist Ducky''
File:PXL 20231003 091826173.jpg|link=https://www.thingiverse.com/thing:5030934 |''Disc Clip''
File:Little Paper Friends.jpg|origami little friends for my girlfrinds desk at work
File:Cable Savers.jpeg|Parracord cable savers. knotted cord around the places that a charging cable usually breaks.
File:Desk Light.jpeg|A desk light that I designed and made in college. May revisit in the future
File:Dream Cathcers.jpg|Dream-Catchers, Materials sourced from a kit, but can be easily found in craft stores here.
File:RC Car From Scratch.jpg|An RC car that I designed and pulled together in secondary school. 3Dprinting, perspex, metalturning.
File:Wood turned spinningtops.jpg|Spinning tops
File:Woodturned Pen.jpg|Rosewood Pen
File:String art sign.jpg|a non-typical use for String-Art
File:Wire model scorpians.jpg|Re-purposing old electrical cables
File:Fixed plant pot.jpg|Kintsugi Hack
File:Bike Lock Holder.jpg|link=https://www.printables.com/model/408279-abus-bordo-lock-holder/files |''Bike lock Holder ''
File:SNowflake.jpg|link=[[Project:Snowflake]]|''Snoflakes''
File:SS Rack Plans.png|link=[[Apartment shoe rack]]|Apartment Shoe Rack
</gallery>
-----------------

== Machines/ Tool Access==
[https://comakingspace.webling.eu/portal#/ '''<big>Members Portal-Login to see your completed introductions etc</big>''']<div style="column-count:2">
*'''<big>Tutor Introuctions</big>'''
**[[3D Printer Introduction|3D Printing]]
**[[Bench Grinder Introduction|Bench Grinder]]
**[[Chop Saw Introduction|Chop Saw]]
**[[Compressor Introduction|Compressor]]
**[[Drill Introduction|Drills]]
**[[Handheld Circular Saw Introduction|Handheld Circular Saw]]
**[[Handheld Router Introduction|Router]]
**[[Heat Introduction|Heat gun, Hot glue, Hot air soldering, Pyrography burner]]
**[[Hand Planes]]
**[[Jointer-Planer Introduction|Jointer Planer]]
**[[Laser Cutter Introduction|Laser Cutter]]
**[[Router Table]]
**[[Sewing Machine Introduction|Sewing Machine]]
**[[Soldering Iron Introduction|Soldering]]
**[[Table Saw Introduction|Table Saw]]
**[[Vertical Bandsaw Introduction|Vertical Bandsaw]]
**[[Woodturning Introduction|Woodturning]]

*'''<big>Wiki / 'R.T.F.M' Intros</big>'''
**[[Personal Protection|PPE some available to share, better to have your own]]
**[[Clamps]]
**[[Hacksaws]]
**[[Festool CTM26 E AC (1)|Shop Vacs]]
**[[Files|Files from the space (not owned by an individual)]]
**[[Bevel Edge Chisels]]
**[[Punches]]
**[[Vises]]
**[[Laser Printers]]
**[[Laminator]]
**[[Paper Cutter]]
**.
**.
**.
**.
**.
**.
</div>
==Sometimes 2 heads are better than 1==
<div style="text-align:center;">
Céad Míle Fáilte, 100.000 Welcomes, Herzlichen Wilkommen! <br>
This section is where I might schowcase some things I have helped others with around the space. <br>
If you could use some help with anything in these specific, or other, areas I am always happy to chat and bounce ideas.
</div>
{| style="width:100%"
|-
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="90" widths="120" caption="Madlén Stange Schrank" perrow="2">
File:Madlén foot V1.jpg|alt=Maldén V1 foot
File:Madlén V1 in situ.jpg
File:Madlén `V1.1 Parts.jpg
File:Madlén V2 Prusa layout.png
</gallery>
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Mamad Baby Bugatti 3D Part">
File:Mamad 3D Model.png
</gallery>
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Björn Retro Arcade">
File:14349728657 7186a72775 c (WIP Oscar de Lama www.flickr.comphotosroofwalker14349728657).jpg
</gallery>
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Maker-Joe Flipper">
File:14349728657 7186a72775 c (WIP Oscar de Lama www.flickr.comphotosroofwalker14349728657).jpg
</gallery>
|}

User:Finno

2026-06-27T10:12:01Z

Finno: /* Sometimes 2 heads are better than 1 */ Table filled with galleries looks nicer than before

{{UserInfoBox
|real_name= Adam Finnerty (User=Finno)
|pronouns=He/ Him|image=Adam Finnerty.JPG
|expertise= I am a generalist.
You should take my advice, I'm not using it.
|interests= All things design, making, learning.
Having conversations with others.

|github=Finno-123
|telegram=@Finno_123
}}

== Hello, It's Me ;) ==
If you are curious about anything that I have posted here, You can;

<div style="column-count:2">
*'''Talk to me Digitally'''
**[[User talk:Finno|talk page]]
**[mailto:alfinnerty@gmail.com email me]
**Telegram
*'''Check me out ;P'''
**[https://www.youtube.com/@adamf302 Youtube]
**[[User:Finno|<small>This Wiki Page</small>]]
**When I am at the space come say Hi
</div>

== Summary of me ==
I joined the space in September 2023 to meet new people and learn from them, as well as to scratch the Making itch, since I had to leave my small shed workshop in Ireland.

A lot of my projects start and take a lot longer than expected becasue I had no idea what I was getting myself into. I learn a lot and then eventually (kind of) finish the project.

I have a background in all things crafts, making and design, and hope to be able to learn from others and share the limited knowledege that I have aswell.

== Projects ==
The projects I take on will be very varied. It could be anything from furniture and decoration for my new apartment or projects to try something I have never done before (almost everything).

I will often '''mix''' areas and interests, so some of the things I post might not ''just be'' making. Some projects might be only design, some might be baking or cooking related. I don't really know, but we will find out :)

Almost everything I post will just be for inspiration.

If you choose to try something for yourself, I will be happy to talk to you about my experience, but I am in no way an expert at anything and this should be well understood.
------------
=== Ideas <small>(will they ever be more than that?)</small> ===

<div style="column-count:3">
*Chess Board
*Chess Pieces
*Scrollsaw Art
*Veneer Stuff
*Vacuume Forming stuff
*Electro plating stuff
*String Art
*Prop-Making
*Wooden toys
*Christmas Decorations
*Dead Blow Hammer/ Mallet
*Round Mallet
*Rolling Pin
*Storage box icons/ labeling
*Keepsake/ Jewlery box
*Hook and Ring game
*Key Organiser - 'Swiss army key'
*Air Hockey Table
*Screen Printing things
*Letterpress things
*Plastic recycling/ injection molding things
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Started, But not really finished... yet...</div>
<div class="mw-collapsible-content">
*Cornhole Game
*Altering/ Sewing Clothes
*Woodturned Pens/ Pencils
</div></div>
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Made it to reality</div>
<div class="mw-collapsible-content">
*Entry way table
*Shoe racks
*Mirror Cabinet extra shelves
*Foiling Projects
*Ultimate Frisbee Disc Holder/clip
</div></div>
</div>


--------------

=== Stuff I am Doing ===
<gallery heights="200" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Finished Pen.jpeg|link=[[Project:Pen Turning]]|Pen Turning

</gallery>
-----------

=== Stuff I have made <small>(Here, There & Everywhere)</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Member wall poster.jpg|link=[[Project:Foiling]]|''Foiling''
File:21. Finsihed rack.jpg|link=[[Project:Basement Boot Rack]]|''Basment Boot Rack''
File:SS of digital modeljpg.png|link=[[Project:Mirrorshelf]]|Bathroom Mirror Shelf
File:Slide Box.jpg|link=[[Project:BonBons]]|''Bonbons & Boxes''
File:Old Attempt.jpg|''First attempt at BonBons, using an icecube mold''
File:Truffles 2019.jpg|''Truffles I made in large quantity's over a couple of days and boxed with a menu card I designed''
File:Woodturned Wineglass Stems.jpg|Woodturned new stems for some Crystal glasses that my grandad liked.
File:PXL 20231101 101802194.jpg|link=https://www.thingiverse.com/thing:721578 |''Tourist Ducky''
File:PXL 20231003 091826173.jpg|link=https://www.thingiverse.com/thing:5030934 |''Disc Clip''
File:Little Paper Friends.jpg|origami little friends for my girlfrinds desk at work
File:Cable Savers.jpeg|Parracord cable savers. knotted cord around the places that a charging cable usually breaks.
File:Desk Light.jpeg|A desk light that I designed and made in college. May revisit in the future
File:Dream Cathcers.jpg|Dream-Catchers, Materials sourced from a kit, but can be easily found in craft stores here.
File:RC Car From Scratch.jpg|An RC car that I designed and pulled together in secondary school. 3Dprinting, perspex, metalturning.
File:Wood turned spinningtops.jpg|Spinning tops
File:Woodturned Pen.jpg|Rosewood Pen
File:String art sign.jpg|a non-typical use for String-Art
File:Wire model scorpians.jpg|Re-purposing old electrical cables
File:Fixed plant pot.jpg|Kintsugi Hack
File:Bike Lock Holder.jpg|link=https://www.printables.com/model/408279-abus-bordo-lock-holder/files |''Bike lock Holder ''
File:SNowflake.jpg|link=[[Project:Snowflake]]|''Snoflakes''
File:SS Rack Plans.png|link=[[Apartment shoe rack]]|Apartment Shoe Rack
</gallery>
-----------------

== Machines/ Tool Access==
[https://comakingspace.webling.eu/portal#/ '''<big>Members Portal-Login to see your completed introductions etc</big>''']<div style="column-count:2">
*'''<big>Tutor Introuctions</big>'''
**[[3D Printer Introduction|3D Printing]]
**[[Bench Grinder Introduction|Bench Grinder]]
**[[Chop Saw Introduction|Chop Saw]]
**[[Compressor Introduction|Compressor]]
**[[Drill Introduction|Drills]]
**[[Handheld Circular Saw Introduction|Handheld Circular Saw]]
**[[Handheld Router Introduction|Router]]
**[[Heat Introduction|Heat gun, Hot glue, Hot air soldering, Pyrography burner]]
**[[Hand Planes]]
**[[Jointer-Planer Introduction|Jointer Planer]]
**[[Laser Cutter Introduction|Laser Cutter]]
**[[Router Table]]
**[[Sewing Machine Introduction|Sewing Machine]]
**[[Soldering Iron Introduction|Soldering]]
**[[Table Saw Introduction|Table Saw]]
**[[Vertical Bandsaw Introduction|Vertical Bandsaw]]
**[[Woodturning Introduction|Woodturning]]

*'''<big>Wiki / 'R.T.F.M' Intros</big>'''
**[[Personal Protection|PPE some available to share, better to have your own]]
**[[Clamps]]
**[[Hacksaws]]
**[[Festool CTM26 E AC (1)|Shop Vacs]]
**[[Files|Files from the space (not owned by an individual)]]
**[[Bevel Edge Chisels]]
**[[Punches]]
**[[Vises]]
**[[Laser Printers]]
**[[Laminator]]
**[[Paper Cutter]]
**.
**.
**.
**.
**.
**.
</div>
==Sometimes 2 heads are better than 1==
Céad Míle Fáilte, 100.000 Welcomes, Herzlichen Wilkommen!
This section is where I might schowcase some things I have helped others with around the space.
If you could use some help with anything in these specific, or other, areas I am always happy to chat and bounce ideas.

{| style="width:100%"
|-
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="90" widths="120" caption="Madlén Stange Schrank" perrow="2">
File:Madlén foot V1.jpg|alt=Maldén V1 foot
File:Madlén V1 in situ.jpg
File:Madlén `V1.1 Parts.jpg
File:Madlén V2 Prusa layout.png
</gallery>
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Mamad Baby Bugatti 3D Part">
File:Mamad 3D Model.png
</gallery>
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Björn Retro Arcade">
File:14349728657 7186a72775 c (WIP Oscar de Lama www.flickr.comphotosroofwalker14349728657).jpg
</gallery>
| style="width:25%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Maker-Joe Flipper">
File:14349728657 7186a72775 c (WIP Oscar de Lama www.flickr.comphotosroofwalker14349728657).jpg
</gallery>
|}

User:Finno

2026-06-27T09:53:12Z

Finno: /* Sometimes 2 heads are better than 1 */

{{UserInfoBox
|real_name= Adam Finnerty (User=Finno)
|pronouns=He/ Him|image=Adam Finnerty.JPG
|expertise= I am a generalist.
You should take my advice, I'm not using it.
|interests= All things design, making, learning.
Having conversations with others.

|github=Finno-123
|telegram=@Finno_123
}}

== Hello, It's Me ;) ==
If you are curious about anything that I have posted here, You can;

<div style="column-count:2">
*'''Talk to me Digitally'''
**[[User talk:Finno|talk page]]
**[mailto:alfinnerty@gmail.com email me]
**Telegram
*'''Check me out ;P'''
**[https://www.youtube.com/@adamf302 Youtube]
**[[User:Finno|<small>This Wiki Page</small>]]
**When I am at the space come say Hi
</div>

== Summary of me ==
I joined the space in September 2023 to meet new people and learn from them, as well as to scratch the Making itch, since I had to leave my small shed workshop in Ireland.

A lot of my projects start and take a lot longer than expected becasue I had no idea what I was getting myself into. I learn a lot and then eventually (kind of) finish the project.

I have a background in all things crafts, making and design, and hope to be able to learn from others and share the limited knowledege that I have aswell.

== Projects ==
The projects I take on will be very varied. It could be anything from furniture and decoration for my new apartment or projects to try something I have never done before (almost everything).

I will often '''mix''' areas and interests, so some of the things I post might not ''just be'' making. Some projects might be only design, some might be baking or cooking related. I don't really know, but we will find out :)

Almost everything I post will just be for inspiration.

If you choose to try something for yourself, I will be happy to talk to you about my experience, but I am in no way an expert at anything and this should be well understood.
------------
=== Ideas <small>(will they ever be more than that?)</small> ===

<div style="column-count:3">
*Chess Board
*Chess Pieces
*Scrollsaw Art
*Veneer Stuff
*Vacuume Forming stuff
*Electro plating stuff
*String Art
*Prop-Making
*Wooden toys
*Christmas Decorations
*Dead Blow Hammer/ Mallet
*Round Mallet
*Rolling Pin
*Storage box icons/ labeling
*Keepsake/ Jewlery box
*Hook and Ring game
*Key Organiser - 'Swiss army key'
*Air Hockey Table
*Screen Printing things
*Letterpress things
*Plastic recycling/ injection molding things
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Started, But not really finished... yet...</div>
<div class="mw-collapsible-content">
*Cornhole Game
*Altering/ Sewing Clothes
*Woodturned Pens/ Pencils
</div></div>
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Made it to reality</div>
<div class="mw-collapsible-content">
*Entry way table
*Shoe racks
*Mirror Cabinet extra shelves
*Foiling Projects
*Ultimate Frisbee Disc Holder/clip
</div></div>
</div>


--------------

=== Stuff I am Doing ===
<gallery heights="200" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Finished Pen.jpeg|link=[[Project:Pen Turning]]|Pen Turning

</gallery>
-----------

=== Stuff I have made <small>(Here, There & Everywhere)</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Member wall poster.jpg|link=[[Project:Foiling]]|''Foiling''
File:21. Finsihed rack.jpg|link=[[Project:Basement Boot Rack]]|''Basment Boot Rack''
File:SS of digital modeljpg.png|link=[[Project:Mirrorshelf]]|Bathroom Mirror Shelf
File:Slide Box.jpg|link=[[Project:BonBons]]|''Bonbons & Boxes''
File:Old Attempt.jpg|''First attempt at BonBons, using an icecube mold''
File:Truffles 2019.jpg|''Truffles I made in large quantity's over a couple of days and boxed with a menu card I designed''
File:Woodturned Wineglass Stems.jpg|Woodturned new stems for some Crystal glasses that my grandad liked.
File:PXL 20231101 101802194.jpg|link=https://www.thingiverse.com/thing:721578 |''Tourist Ducky''
File:PXL 20231003 091826173.jpg|link=https://www.thingiverse.com/thing:5030934 |''Disc Clip''
File:Little Paper Friends.jpg|origami little friends for my girlfrinds desk at work
File:Cable Savers.jpeg|Parracord cable savers. knotted cord around the places that a charging cable usually breaks.
File:Desk Light.jpeg|A desk light that I designed and made in college. May revisit in the future
File:Dream Cathcers.jpg|Dream-Catchers, Materials sourced from a kit, but can be easily found in craft stores here.
File:RC Car From Scratch.jpg|An RC car that I designed and pulled together in secondary school. 3Dprinting, perspex, metalturning.
File:Wood turned spinningtops.jpg|Spinning tops
File:Woodturned Pen.jpg|Rosewood Pen
File:String art sign.jpg|a non-typical use for String-Art
File:Wire model scorpians.jpg|Re-purposing old electrical cables
File:Fixed plant pot.jpg|Kintsugi Hack
File:Bike Lock Holder.jpg|link=https://www.printables.com/model/408279-abus-bordo-lock-holder/files |''Bike lock Holder ''
File:SNowflake.jpg|link=[[Project:Snowflake]]|''Snoflakes''
File:SS Rack Plans.png|link=[[Apartment shoe rack]]|Apartment Shoe Rack
</gallery>
-----------------

== Machines/ Tool Access==
[https://comakingspace.webling.eu/portal#/ '''<big>Members Portal-Login to see your completed introductions etc</big>''']<div style="column-count:2">
*'''<big>Tutor Introuctions</big>'''
**[[3D Printer Introduction|3D Printing]]
**[[Bench Grinder Introduction|Bench Grinder]]
**[[Chop Saw Introduction|Chop Saw]]
**[[Compressor Introduction|Compressor]]
**[[Drill Introduction|Drills]]
**[[Handheld Circular Saw Introduction|Handheld Circular Saw]]
**[[Handheld Router Introduction|Router]]
**[[Heat Introduction|Heat gun, Hot glue, Hot air soldering, Pyrography burner]]
**[[Hand Planes]]
**[[Jointer-Planer Introduction|Jointer Planer]]
**[[Laser Cutter Introduction|Laser Cutter]]
**[[Router Table]]
**[[Sewing Machine Introduction|Sewing Machine]]
**[[Soldering Iron Introduction|Soldering]]
**[[Table Saw Introduction|Table Saw]]
**[[Vertical Bandsaw Introduction|Vertical Bandsaw]]
**[[Woodturning Introduction|Woodturning]]

*'''<big>Wiki / 'R.T.F.M' Intros</big>'''
**[[Personal Protection|PPE some available to share, better to have your own]]
**[[Clamps]]
**[[Hacksaws]]
**[[Festool CTM26 E AC (1)|Shop Vacs]]
**[[Files|Files from the space (not owned by an individual)]]
**[[Bevel Edge Chisels]]
**[[Punches]]
**[[Vises]]
**[[Laser Printers]]
**[[Laminator]]
**[[Paper Cutter]]
**.
**.
**.
**.
**.
**.
</div>
==Sometimes 2 heads are better than 1==
Céad Míle Fáilte, 100.000 Welcomes, Herzlichen Wilkommen!
This section is where I might schowcase some things I have helped others with around the space.
If you could use some help with anything in these specific, or other, areas I am always happy to chat and bounce ideas.

{| style="width:100%"
|-
| style="width:40%; vertical-align:top; text-align:center;" |
<gallery heights="90" widths="120" caption="Madlén Stange Schrank" perrow="2">
File:Madlén foot V1.jpg|alt=Maldén V1 foot
File:Madlén V1 in situ.jpg
File:Madlén `V1.1 Parts.jpg
File:Madlén V2 Prusa layout.png
</gallery>
| style="width:60%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Mamad Baby Bugatti 3D Part">
File:Mamad 3D Model.png
</gallery>
|}

User:Finno

2026-06-27T09:46:52Z

Finno: /* Sometimes 2 heads are better than 1 */

{{UserInfoBox
|real_name= Adam Finnerty (User=Finno)
|pronouns=He/ Him|image=Adam Finnerty.JPG
|expertise= I am a generalist.
You should take my advice, I'm not using it.
|interests= All things design, making, learning.
Having conversations with others.

|github=Finno-123
|telegram=@Finno_123
}}

== Hello, It's Me ;) ==
If you are curious about anything that I have posted here, You can;

<div style="column-count:2">
*'''Talk to me Digitally'''
**[[User talk:Finno|talk page]]
**[mailto:alfinnerty@gmail.com email me]
**Telegram
*'''Check me out ;P'''
**[https://www.youtube.com/@adamf302 Youtube]
**[[User:Finno|<small>This Wiki Page</small>]]
**When I am at the space come say Hi
</div>

== Summary of me ==
I joined the space in September 2023 to meet new people and learn from them, as well as to scratch the Making itch, since I had to leave my small shed workshop in Ireland.

A lot of my projects start and take a lot longer than expected becasue I had no idea what I was getting myself into. I learn a lot and then eventually (kind of) finish the project.

I have a background in all things crafts, making and design, and hope to be able to learn from others and share the limited knowledege that I have aswell.

== Projects ==
The projects I take on will be very varied. It could be anything from furniture and decoration for my new apartment or projects to try something I have never done before (almost everything).

I will often '''mix''' areas and interests, so some of the things I post might not ''just be'' making. Some projects might be only design, some might be baking or cooking related. I don't really know, but we will find out :)

Almost everything I post will just be for inspiration.

If you choose to try something for yourself, I will be happy to talk to you about my experience, but I am in no way an expert at anything and this should be well understood.
------------
=== Ideas <small>(will they ever be more than that?)</small> ===

<div style="column-count:3">
*Chess Board
*Chess Pieces
*Scrollsaw Art
*Veneer Stuff
*Vacuume Forming stuff
*Electro plating stuff
*String Art
*Prop-Making
*Wooden toys
*Christmas Decorations
*Dead Blow Hammer/ Mallet
*Round Mallet
*Rolling Pin
*Storage box icons/ labeling
*Keepsake/ Jewlery box
*Hook and Ring game
*Key Organiser - 'Swiss army key'
*Air Hockey Table
*Screen Printing things
*Letterpress things
*Plastic recycling/ injection molding things
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Started, But not really finished... yet...</div>
<div class="mw-collapsible-content">
*Cornhole Game
*Altering/ Sewing Clothes
*Woodturned Pens/ Pencils
</div></div>
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Made it to reality</div>
<div class="mw-collapsible-content">
*Entry way table
*Shoe racks
*Mirror Cabinet extra shelves
*Foiling Projects
*Ultimate Frisbee Disc Holder/clip
</div></div>
</div>


--------------

=== Stuff I am Doing ===
<gallery heights="200" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Finished Pen.jpeg|link=[[Project:Pen Turning]]|Pen Turning

</gallery>
-----------

=== Stuff I have made <small>(Here, There & Everywhere)</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Member wall poster.jpg|link=[[Project:Foiling]]|''Foiling''
File:21. Finsihed rack.jpg|link=[[Project:Basement Boot Rack]]|''Basment Boot Rack''
File:SS of digital modeljpg.png|link=[[Project:Mirrorshelf]]|Bathroom Mirror Shelf
File:Slide Box.jpg|link=[[Project:BonBons]]|''Bonbons & Boxes''
File:Old Attempt.jpg|''First attempt at BonBons, using an icecube mold''
File:Truffles 2019.jpg|''Truffles I made in large quantity's over a couple of days and boxed with a menu card I designed''
File:Woodturned Wineglass Stems.jpg|Woodturned new stems for some Crystal glasses that my grandad liked.
File:PXL 20231101 101802194.jpg|link=https://www.thingiverse.com/thing:721578 |''Tourist Ducky''
File:PXL 20231003 091826173.jpg|link=https://www.thingiverse.com/thing:5030934 |''Disc Clip''
File:Little Paper Friends.jpg|origami little friends for my girlfrinds desk at work
File:Cable Savers.jpeg|Parracord cable savers. knotted cord around the places that a charging cable usually breaks.
File:Desk Light.jpeg|A desk light that I designed and made in college. May revisit in the future
File:Dream Cathcers.jpg|Dream-Catchers, Materials sourced from a kit, but can be easily found in craft stores here.
File:RC Car From Scratch.jpg|An RC car that I designed and pulled together in secondary school. 3Dprinting, perspex, metalturning.
File:Wood turned spinningtops.jpg|Spinning tops
File:Woodturned Pen.jpg|Rosewood Pen
File:String art sign.jpg|a non-typical use for String-Art
File:Wire model scorpians.jpg|Re-purposing old electrical cables
File:Fixed plant pot.jpg|Kintsugi Hack
File:Bike Lock Holder.jpg|link=https://www.printables.com/model/408279-abus-bordo-lock-holder/files |''Bike lock Holder ''
File:SNowflake.jpg|link=[[Project:Snowflake]]|''Snoflakes''
File:SS Rack Plans.png|link=[[Apartment shoe rack]]|Apartment Shoe Rack
</gallery>
-----------------

== Machines/ Tool Access==
[https://comakingspace.webling.eu/portal#/ '''<big>Members Portal-Login to see your completed introductions etc</big>''']<div style="column-count:2">
*'''<big>Tutor Introuctions</big>'''
**[[3D Printer Introduction|3D Printing]]
**[[Bench Grinder Introduction|Bench Grinder]]
**[[Chop Saw Introduction|Chop Saw]]
**[[Compressor Introduction|Compressor]]
**[[Drill Introduction|Drills]]
**[[Handheld Circular Saw Introduction|Handheld Circular Saw]]
**[[Handheld Router Introduction|Router]]
**[[Heat Introduction|Heat gun, Hot glue, Hot air soldering, Pyrography burner]]
**[[Hand Planes]]
**[[Jointer-Planer Introduction|Jointer Planer]]
**[[Laser Cutter Introduction|Laser Cutter]]
**[[Router Table]]
**[[Sewing Machine Introduction|Sewing Machine]]
**[[Soldering Iron Introduction|Soldering]]
**[[Table Saw Introduction|Table Saw]]
**[[Vertical Bandsaw Introduction|Vertical Bandsaw]]
**[[Woodturning Introduction|Woodturning]]

*'''<big>Wiki / 'R.T.F.M' Intros</big>'''
**[[Personal Protection|PPE some available to share, better to have your own]]
**[[Clamps]]
**[[Hacksaws]]
**[[Festool CTM26 E AC (1)|Shop Vacs]]
**[[Files|Files from the space (not owned by an individual)]]
**[[Bevel Edge Chisels]]
**[[Punches]]
**[[Vises]]
**[[Laser Printers]]
**[[Laminator]]
**[[Paper Cutter]]
**.
**.
**.
**.
**.
**.
</div>
==Sometimes 2 heads are better than 1==
Céad Míle Fáilte, 100.000 Welcomes, Herzlichen Wilkommen!
This section is where I might schowcase some things I have helped others with around the space.
If you could use some help with anything in these specific, or other, areas I am always happy to chat and bounce ideas.

{| style="width:100%"
|-
| style="width:40%; vertical-align:top; text-align:center;" |
<div style="max-height:200px; width:100%; overflow:hidden;">
<gallery mode="slideshow" caption="Madlén Stange Schrank" heights="150" widths="250">
File:Madlén foot V1.jpg|alt=Maldén V1 foot
File:Madlén V1 in situ.jpg
File:Madlén `V1.1 Parts.jpg
File:Madlén V2 Prusa layout.png
</gallery>
</div>
| style="width:60%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Mamad Baby Bugatti 3D Part">
File:Mamad 3D Model.png
</gallery>
|}

User:Finno

2026-06-27T09:43:27Z

Finno: /* Sometimes 2 heads are better than 1 */ Attempting improvements to allow more entries cleanly in future

{{UserInfoBox
|real_name= Adam Finnerty (User=Finno)
|pronouns=He/ Him|image=Adam Finnerty.JPG
|expertise= I am a generalist.
You should take my advice, I'm not using it.
|interests= All things design, making, learning.
Having conversations with others.

|github=Finno-123
|telegram=@Finno_123
}}

== Hello, It's Me ;) ==
If you are curious about anything that I have posted here, You can;

<div style="column-count:2">
*'''Talk to me Digitally'''
**[[User talk:Finno|talk page]]
**[mailto:alfinnerty@gmail.com email me]
**Telegram
*'''Check me out ;P'''
**[https://www.youtube.com/@adamf302 Youtube]
**[[User:Finno|<small>This Wiki Page</small>]]
**When I am at the space come say Hi
</div>

== Summary of me ==
I joined the space in September 2023 to meet new people and learn from them, as well as to scratch the Making itch, since I had to leave my small shed workshop in Ireland.

A lot of my projects start and take a lot longer than expected becasue I had no idea what I was getting myself into. I learn a lot and then eventually (kind of) finish the project.

I have a background in all things crafts, making and design, and hope to be able to learn from others and share the limited knowledege that I have aswell.

== Projects ==
The projects I take on will be very varied. It could be anything from furniture and decoration for my new apartment or projects to try something I have never done before (almost everything).

I will often '''mix''' areas and interests, so some of the things I post might not ''just be'' making. Some projects might be only design, some might be baking or cooking related. I don't really know, but we will find out :)

Almost everything I post will just be for inspiration.

If you choose to try something for yourself, I will be happy to talk to you about my experience, but I am in no way an expert at anything and this should be well understood.
------------
=== Ideas <small>(will they ever be more than that?)</small> ===

<div style="column-count:3">
*Chess Board
*Chess Pieces
*Scrollsaw Art
*Veneer Stuff
*Vacuume Forming stuff
*Electro plating stuff
*String Art
*Prop-Making
*Wooden toys
*Christmas Decorations
*Dead Blow Hammer/ Mallet
*Round Mallet
*Rolling Pin
*Storage box icons/ labeling
*Keepsake/ Jewlery box
*Hook and Ring game
*Key Organiser - 'Swiss army key'
*Air Hockey Table
*Screen Printing things
*Letterpress things
*Plastic recycling/ injection molding things
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Started, But not really finished... yet...</div>
<div class="mw-collapsible-content">
*Cornhole Game
*Altering/ Sewing Clothes
*Woodturned Pens/ Pencils
</div></div>
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Made it to reality</div>
<div class="mw-collapsible-content">
*Entry way table
*Shoe racks
*Mirror Cabinet extra shelves
*Foiling Projects
*Ultimate Frisbee Disc Holder/clip
</div></div>
</div>


--------------

=== Stuff I am Doing ===
<gallery heights="200" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Finished Pen.jpeg|link=[[Project:Pen Turning]]|Pen Turning

</gallery>
-----------

=== Stuff I have made <small>(Here, There & Everywhere)</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Member wall poster.jpg|link=[[Project:Foiling]]|''Foiling''
File:21. Finsihed rack.jpg|link=[[Project:Basement Boot Rack]]|''Basment Boot Rack''
File:SS of digital modeljpg.png|link=[[Project:Mirrorshelf]]|Bathroom Mirror Shelf
File:Slide Box.jpg|link=[[Project:BonBons]]|''Bonbons & Boxes''
File:Old Attempt.jpg|''First attempt at BonBons, using an icecube mold''
File:Truffles 2019.jpg|''Truffles I made in large quantity's over a couple of days and boxed with a menu card I designed''
File:Woodturned Wineglass Stems.jpg|Woodturned new stems for some Crystal glasses that my grandad liked.
File:PXL 20231101 101802194.jpg|link=https://www.thingiverse.com/thing:721578 |''Tourist Ducky''
File:PXL 20231003 091826173.jpg|link=https://www.thingiverse.com/thing:5030934 |''Disc Clip''
File:Little Paper Friends.jpg|origami little friends for my girlfrinds desk at work
File:Cable Savers.jpeg|Parracord cable savers. knotted cord around the places that a charging cable usually breaks.
File:Desk Light.jpeg|A desk light that I designed and made in college. May revisit in the future
File:Dream Cathcers.jpg|Dream-Catchers, Materials sourced from a kit, but can be easily found in craft stores here.
File:RC Car From Scratch.jpg|An RC car that I designed and pulled together in secondary school. 3Dprinting, perspex, metalturning.
File:Wood turned spinningtops.jpg|Spinning tops
File:Woodturned Pen.jpg|Rosewood Pen
File:String art sign.jpg|a non-typical use for String-Art
File:Wire model scorpians.jpg|Re-purposing old electrical cables
File:Fixed plant pot.jpg|Kintsugi Hack
File:Bike Lock Holder.jpg|link=https://www.printables.com/model/408279-abus-bordo-lock-holder/files |''Bike lock Holder ''
File:SNowflake.jpg|link=[[Project:Snowflake]]|''Snoflakes''
File:SS Rack Plans.png|link=[[Apartment shoe rack]]|Apartment Shoe Rack
</gallery>
-----------------

== Machines/ Tool Access==
[https://comakingspace.webling.eu/portal#/ '''<big>Members Portal-Login to see your completed introductions etc</big>''']<div style="column-count:2">
*'''<big>Tutor Introuctions</big>'''
**[[3D Printer Introduction|3D Printing]]
**[[Bench Grinder Introduction|Bench Grinder]]
**[[Chop Saw Introduction|Chop Saw]]
**[[Compressor Introduction|Compressor]]
**[[Drill Introduction|Drills]]
**[[Handheld Circular Saw Introduction|Handheld Circular Saw]]
**[[Handheld Router Introduction|Router]]
**[[Heat Introduction|Heat gun, Hot glue, Hot air soldering, Pyrography burner]]
**[[Hand Planes]]
**[[Jointer-Planer Introduction|Jointer Planer]]
**[[Laser Cutter Introduction|Laser Cutter]]
**[[Router Table]]
**[[Sewing Machine Introduction|Sewing Machine]]
**[[Soldering Iron Introduction|Soldering]]
**[[Table Saw Introduction|Table Saw]]
**[[Vertical Bandsaw Introduction|Vertical Bandsaw]]
**[[Woodturning Introduction|Woodturning]]

*'''<big>Wiki / 'R.T.F.M' Intros</big>'''
**[[Personal Protection|PPE some available to share, better to have your own]]
**[[Clamps]]
**[[Hacksaws]]
**[[Festool CTM26 E AC (1)|Shop Vacs]]
**[[Files|Files from the space (not owned by an individual)]]
**[[Bevel Edge Chisels]]
**[[Punches]]
**[[Vises]]
**[[Laser Printers]]
**[[Laminator]]
**[[Paper Cutter]]
**.
**.
**.
**.
**.
**.
</div>
==Sometimes 2 heads are better than 1==
Céad Míle Fáilte, 100.000 Welcomes, Herzlichen Wilkommen!
This section is where I might schowcase some things I have helped others with around the space.
If you could use some help with anything in these specific, or other, areas I am always happy to chat and bounce ideas.

{| style="width:100%"
|-
| style="width:40%; vertical-align:top; text-align:center;" |
<div style="height:200px; overflow:visible;">
<gallery mode="slideshow" caption="Madlén Stange Schrank" heights="200">
File:Madlén foot V1.jpg|alt=Maldén V1 foot
File:Madlén V1 in situ.jpg
File:Madlén V1.1 Parts.jpg
File:Madlén V2 Prusa layout.png
</gallery>
</div>
| style="width:60%; vertical-align:top; text-align:center;" |
<gallery heights="200" caption="Mamad Baby Bugatti 3D Part">
File:Mamad 3D Model.png
</gallery>
|}

Project:Pen Turning

2026-06-27T08:57:52Z

Finno:

{{ProjectInfoBox
|project title=Pen Turning
|image=Finished Pen.jpeg
|status=Ongoing
|initiator=User:Finno
|materials= Wood, Pen Kits, Adhesives
|tools=Wood Lathe/ Drillbits/ Pen Turning Kit
}}

== What is a turned pen? ==
== What tools do you need? ==
== What materials do you need? ==
-----------------
=== Pen Turning Process</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Pen turning tools.jpeg
File:Pen turning 1.jpeg
File:Pen turning 2.jpeg
File:Pen turning 3.jpeg
File:PXL 20241216 123507726.MP.jpg
File:Pen Assy Start.jpg
File:Pen assy Parts.jpg
File:Pen assy layout.jpg
File:Penn assy press in.jpg
File:Pen Assy Complete.jpg
File:Finished Pen.jpeg
File:Woodturned Pen.jpg
</gallery>
-----------------

Template:ProjectInfoBox

2026-06-27T08:55:53Z

Finno: adjusted the property ´Has caption` to fix broken links in the infobox gallery

{| class="wikitable" style="float:right; margin-left: 10px; border-style: solid; border-width: 5px; border-color: #00773D"
!colspan="2"|<small style="float:right">[[Template:ProjectInfoBox|ProjectInfoBox]]</small><br>
<big>'''{{{project title|Unnamed Project}}}'''</big>
|-
!colspan="2"| [[{{#if: {{{extrabox|}}} |File: | Has image::File:}}{{#if: {{{image|}}} |{{{image}}} |project-default.png}}|frameless|300px]]
|-
| Status:
| {{{status|planned}}}
|-
{{#if: {{{date|}}} |
{{!}}-
{{!}} Release Date:
{{!}} [[ProjectDate::{{{date|(planned) finishing date}}}]]
|}}
|-
| Initiator:
| {{{initiator|who maintains it?}}}
|-
{{#if: {{{team|}}} |
{{!}}-
{{!}} Team:
{{!}} {{{team}}}
|}}
|-
{{#if: {{{materials|}}} |
{{!}}-
{{!}} Materials Used:
{{!}} {{{materials}}}
|}}
|-
{{#if: {{{tools|}}} |
{{!}}-
{{!}} Tools Used:
{{!}} {{{tools}}}
|}}
|-
{{#if: {{{software|}}} |
{{!}}-
{{!}} Software Used:
{{!}} {{{software}}}
|}}
|-
{{#if: {{{cost|}}} |
{{!}}-
{{!}} Approx. Cost:
{{!}} {{{cost}}}
|}}
|}
[[Has caption::{{FULLPAGENAME}}|]]
<noinclude>
Inform others about your [[Projects|project]] in a compact overview!

== Documentation ==
To use this template, simply copy this code into your page and enter the relevant parameters:
<pre>
{{ProjectInfoBox
|project title=
|image=
|status=
|date=
|initiator=
|team=
|materials=
|tools=
|software=
|cost=
}}
</pre>
Default values for some parameters exist, but will only be used if the entire line is omitted. For example, <code>|image=</code> leads to no image being displayed while not entering the image parameter at all will lead to the default image (light bulb) being displayed. Please make use of the "Show preview" button and it should be clear.

If you had/have helpers with your project, you can use the <code>team</code> value to give them credit. Try using [[Template:HelpNeeded]] here to find collaborators! If you delete it or leave it empty, that field is not displayed at all.

The <code>software</code>, <code>materials</code> and <code>tools</code> value behaves this way as well since some projects are realized with tools and materials but others are done mostly digitally.

== [[Semantic MediaWiki]] ==
The content you enter for "date" can be queried under [[Property:ProjectDate]].

== Bugs/Future Development ==
* selection instead of free text: status= planned/in progress/finished?

== Template Parameters ==
<templatedata>
{
"description": "Provide information about a project you have built.",
"params": {
"project title": {
"label": "The name of your project",
"type": "string",
"required": true,
"description": "The name of your project",
"default": "Unnamed Project"
},
"image": {
"label": "An image for your project (example.jpg)",
"type": "wiki-file-name",
"required": false,
"description": "The file name of the image which represents your project the best. This might be printed on our [[Project Wall]]",
"suggested": true
},
"status": {
"label": "Status of your project",
"type": "string",
"required": false,
"description": "The current release status of your project",
"default": "planned",
"suggested": true
},
"date": {
"label": "The release date of your project",
"type": "date",
"required": false,
"description": "The date on which your project has been finished. Will be assigned to Property:ProjectDate and thus be searchable within [[Semantic MediaWiki]]."
},
"initiator": {
"label": "Who initiated your project?",
"type": "string",
"required": false,
"description": "The user page or name of the person who initiated the project.",
"default": "who maintains it?",
"suggested": true
},
"team": {
"label": "The team helping with your project.",
"type": "string",
"required": false
},
"materials": {
"label": "Materials you have used (wiki links, if possible).",
"type": "string",
"required": false,
"description": "A list of materials you have used in your project. Please provide them as wiki links ([[Material]])"
},
"tools": {
"label": "Tools you have used (wiki links, if possible).",
"type": "string",
"required": false,
"description": "A list of tools you have used in your project. Please provide them as wiki links ([[Tools]])"
},
"software": {
"label": "Software you have used (wiki links, if possible).",
"type": "string",
"required": false,
"description": "A list of softwareyou have used in your project. Please provide them as wiki links ([[Software]])"
},
"cost": {
"label": "Costs of your project",
"type": "string",
"required": false,
"description": "An estimate of the cost to be expected if someone wants to recreate your project."
}
}
}
</templatedata>
</noinclude>

Project:Pen Turning

2026-06-27T07:49:35Z

Finno: Testing page name string for possible required template update

Project:Pen Turning

2026-06-27T07:45:38Z

Finno:

Projects

2026-06-27T07:44:22Z

Finno: /* Gallery */

Project:Pen Turning

2026-06-27T07:36:42Z

Finno: Testing a fix

User:Finno

2026-06-25T06:13:07Z

Finno: Fixing outdated things on my page

{{UserInfoBox
|real_name= Adam Finnerty (User=Finno)
|pronouns=He/ Him|image=Adam Finnerty.JPG
|expertise= I am a generalist.
You should take my advice, I'm not using it.
|interests= All things design, making, learning.
Having conversations with others.

|github=Finno-123
|telegram=@Finno_123
}}

== Hello, It's Me ;) ==
If you are curious about anything that I have posted here, You can;

<div style="column-count:2">
*'''Talk to me Digitally'''
**[[User talk:Finno|talk page]]
**[mailto:alfinnerty@gmail.com email me]
**Telegram
*'''Check me out ;P'''
**[https://www.youtube.com/@adamf302 Youtube]
**[[User:Finno|<small>This Wiki Page</small>]]
**When I am at the space come say Hi
</div>

== Summary of me ==
I joined the space in September 2023 to meet new people and learn from them, as well as to scratch the Making itch, since I had to leave my small shed workshop in Ireland.

A lot of my projects start and take a lot longer than expected becasue I had no idea what I was getting myself into. I learn a lot and then eventually (kind of) finish the project.

I have a background in all things crafts, making and design, and hope to be able to learn from others and share the limited knowledege that I have aswell.

== Projects ==
The projects I take on will be very varied. It could be anything from furniture and decoration for my new apartment or projects to try something I have never done before (almost everything).

I will often '''mix''' areas and interests, so some of the things I post might not ''just be'' making. Some projects might be only design, some might be baking or cooking related. I don't really know, but we will find out :)

Almost everything I post will just be for inspiration.

If you choose to try something for yourself, I will be happy to talk to you about my experience, but I am in no way an expert at anything and this should be well understood.
------------
=== Ideas <small>(will they ever be more than that?)</small> ===

<div style="column-count:3">
*Chess Board
*Chess Pieces
*Scrollsaw Art
*Veneer Stuff
*Vacuume Forming stuff
*Electro plating stuff
*String Art
*Prop-Making
*Wooden toys
*Christmas Decorations
*Dead Blow Hammer/ Mallet
*Round Mallet
*Rolling Pin
*Storage box icons/ labeling
*Keepsake/ Jewlery box
*Hook and Ring game
*Key Organiser - 'Swiss army key'
*Air Hockey Table
*Screen Printing things
*Letterpress things
*Plastic recycling/ injection molding things
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Started, But not really finished... yet...</div>
<div class="mw-collapsible-content">
*Cornhole Game
*Altering/ Sewing Clothes
*Woodturned Pens/ Pencils
</div></div>
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Made it to reality</div>
<div class="mw-collapsible-content">
*Entry way table
*Shoe racks
*Mirror Cabinet extra shelves
*Foiling Projects
*Ultimate Frisbee Disc Holder/clip
</div></div>
</div>


--------------

=== Stuff I am Doing ===
<gallery heights="200" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Finished Pen.jpeg|link=[[Project:Pen Turning]]|Pen Turning

</gallery>
-----------

=== Stuff I have made <small>(Here, There & Everywhere)</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Member wall poster.jpg|link=[[Project:Foiling]]|''Foiling''
File:21. Finsihed rack.jpg|link=[[Project:Basement Boot Rack]]|''Basment Boot Rack''
File:SS of digital modeljpg.png|link=[[Project:Mirrorshelf]]|Bathroom Mirror Shelf
File:Slide Box.jpg|link=[[Project:BonBons]]|''Bonbons & Boxes''
File:Old Attempt.jpg|''First attempt at BonBons, using an icecube mold''
File:Truffles 2019.jpg|''Truffles I made in large quantity's over a couple of days and boxed with a menu card I designed''
File:Woodturned Wineglass Stems.jpg|Woodturned new stems for some Crystal glasses that my grandad liked.
File:PXL 20231101 101802194.jpg|link=https://www.thingiverse.com/thing:721578 |''Tourist Ducky''
File:PXL 20231003 091826173.jpg|link=https://www.thingiverse.com/thing:5030934 |''Disc Clip''
File:Little Paper Friends.jpg|origami little friends for my girlfrinds desk at work
File:Cable Savers.jpeg|Parracord cable savers. knotted cord around the places that a charging cable usually breaks.
File:Desk Light.jpeg|A desk light that I designed and made in college. May revisit in the future
File:Dream Cathcers.jpg|Dream-Catchers, Materials sourced from a kit, but can be easily found in craft stores here.
File:RC Car From Scratch.jpg|An RC car that I designed and pulled together in secondary school. 3Dprinting, perspex, metalturning.
File:Wood turned spinningtops.jpg|Spinning tops
File:Woodturned Pen.jpg|Rosewood Pen
File:String art sign.jpg|a non-typical use for String-Art
File:Wire model scorpians.jpg|Re-purposing old electrical cables
File:Fixed plant pot.jpg|Kintsugi Hack
File:Bike Lock Holder.jpg|link=https://www.printables.com/model/408279-abus-bordo-lock-holder/files |''Bike lock Holder ''
File:SNowflake.jpg|link=[[Project:Snowflake]]|''Snoflakes''
File:SS Rack Plans.png|link=[[Apartment shoe rack]]|Apartment Shoe Rack
</gallery>
-----------------

== Machines/ Tool Access==
[https://comakingspace.webling.eu/portal#/ '''<big>Members Portal-Login to see your completed introductions etc</big>''']<div style="column-count:2">
*'''<big>Tutor Introuctions</big>'''
**[[3D Printer Introduction|3D Printing]]
**[[Bench Grinder Introduction|Bench Grinder]]
**[[Chop Saw Introduction|Chop Saw]]
**[[Compressor Introduction|Compressor]]
**[[Drill Introduction|Drills]]
**[[Handheld Circular Saw Introduction|Handheld Circular Saw]]
**[[Handheld Router Introduction|Router]]
**[[Heat Introduction|Heat gun, Hot glue, Hot air soldering, Pyrography burner]]
**[[Hand Planes]]
**[[Jointer-Planer Introduction|Jointer Planer]]
**[[Laser Cutter Introduction|Laser Cutter]]
**[[Router Table]]
**[[Sewing Machine Introduction|Sewing Machine]]
**[[Soldering Iron Introduction|Soldering]]
**[[Table Saw Introduction|Table Saw]]
**[[Vertical Bandsaw Introduction|Vertical Bandsaw]]
**[[Woodturning Introduction|Woodturning]]

*'''<big>Wiki / 'R.T.F.M' Intros</big>'''
**[[Personal Protection|PPE some available to share, better to have your own]]
**[[Clamps]]
**[[Hacksaws]]
**[[Festool CTM26 E AC (1)|Shop Vacs]]
**[[Files|Files from the space (not owned by an individual)]]
**[[Bevel Edge Chisels]]
**[[Punches]]
**[[Vises]]
**[[Laser Printers]]
**[[Laminator]]
**[[Paper Cutter]]
**.
**.
**.
**.
**.
**.
</div>
==Sometimes 2 heads are better than 1==
Céad Míle Fáilte, 100.000 Welcomes, Herzlichen Wilkommen!
This section is where I might schowcase some things I have helped others with around the space.
If you could use some help with anything in these specific, or other, areas I am always happy to chat and bounce ideas.
=== Madlén Stange Schrank ===
<gallery heights="150" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Madlén foot V1.jpg|alt=Maldén V1 foot
File:Madlén V1 in situ.jpg
File:Madlén `V1.1 Parts.jpg
File:Madlén V2 Prusa layout.png
</gallery>

=== Mamad Baby Bugatti 3D Part ===
<gallery heights="150" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Mamad 3D Model.png
</gallery>

User:Finno

2026-06-24T18:22:16Z

Finno: /* Stuff I am Doing */ Trying to be current

{{UserInfoBox
|real_name= Adam Finnerty (User=Finno)
|pronouns=He/ Him|image=Adam Finnerty.JPG
|expertise= I am a generalist.
You should take my advice, I'm not using it.
|interests= All things design, making, learning.
Having conversations with others.
|website= https://www.adamfinnerty.com/
|github=Finno-123
|telegram=@Finno_123
}}

== Hello, It's Me ;) ==
If you are curious about anything that I have posted here, You can;

<div style="column-count:2">
*'''Talk to me Digitally'''
**[[User talk:Finno|talk page]]
**[mailto:alfinnerty@gmail.com email me]
**Telegram
*'''Check me out ;P'''
**[https://www.youtube.com/@adamf302 Youtube]
**[[User:Finno|<small>This Wiki Page</small>]]
**When I am at the space come say Hi
</div>

== Summary of me ==
I joined the space in September 2023 to meet new people and learn from them, as well as to scratch the Making itch, since I had to leave my small shed workshop in Ireland.

A lot of my projects start and take a lot longer than expected becasue I had no idea what I was getting myself into. I learn a lot and then eventually (kind of) finish the project.

I have a background in all things crafts, making and design, and hope to be able to learn from others and share the limited knowledege that I have aswell.

== Projects ==
The projects I take on will be very varied. It could be anything from furniture and decoration for my new apartment or projects to try something I have never done before (almost everything).

I will often '''mix''' areas and interests, so some of the things I post might not ''just be'' making. Some projects might be only design, some might be baking or cooking related. I don't really know, but we will find out :)

Almost everything I post will just be for inspiration.

If you choose to try something for yourself, I will be happy to talk to you about my experience, but I am in no way an expert at anything and this should be well understood.
------------
=== Ideas <small>(will they ever be more than that?)</small> ===

<div style="column-count:3">
*Chess Board
*Chess Pieces
*Scrollsaw Art
*Veneer Stuff
*Vacuume Forming stuff
*Electro plating stuff
*String Art
*Prop-Making
*Wooden toys
*Christmas Decorations
*Dead Blow Hammer/ Mallet
*Round Mallet
*Rolling Pin
*Storage box icons/ labeling
*Keepsake/ Jewlery box
*Hook and Ring game
*Key Organiser - 'Swiss army key'
*Air Hockey Table
*Screen Printing things
*Letterpress things
*Plastic recycling/ injection molding things
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Started, But not really finished... yet...</div>
<div class="mw-collapsible-content">
*Cornhole Game
*Altering/ Sewing Clothes
*Woodturned Pens/ Pencils
</div></div>
<div class="toccolours mw-collapsible mw-collapsed" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
<div style="color:green;font-weight:bold;line-height:2;">Made it to reality</div>
<div class="mw-collapsible-content">
*Entry way table
*Shoe racks
*Mirror Cabinet extra shelves
*Foiling Projects
*Ultimate Frisbee Disc Holder/clip
</div></div>
</div>


--------------

=== Stuff I am Doing ===
<gallery heights="200" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Finished Pen.jpeg|link=[[Project:Pen Turning]]|Pen Turning

</gallery>
-----------

=== Stuff I have made <small>(Here, There & Everywhere)</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Member wall poster.jpg|link=[[Project:Foiling]]|''Foiling''
File:21. Finsihed rack.jpg|link=[[Project:Basement Boot Rack]]|''Basment Boot Rack''
File:SS of digital modeljpg.png|link=[[Project:Mirrorshelf]]|Bathroom Mirror Shelf
File:Slide Box.jpg|link=[[Project:BonBons]]|''Bonbons & Boxes''
File:Old Attempt.jpg|''First attempt at BonBons, using an icecube mold''
File:Truffles 2019.jpg|''Truffles I made in large quantity's over a couple of days and boxed with a menu card I designed''
File:Woodturned Wineglass Stems.jpg|Woodturned new stems for some Crystal glasses that my grandad liked.
File:PXL 20231101 101802194.jpg|link=https://www.thingiverse.com/thing:721578 |''Tourist Ducky''
File:PXL 20231003 091826173.jpg|link=https://www.thingiverse.com/thing:5030934 |''Disc Clip''
File:Little Paper Friends.jpg|origami little friends for my girlfrinds desk at work
File:Cable Savers.jpeg|Parracord cable savers. knotted cord around the places that a charging cable usually breaks.
File:Desk Light.jpeg|A desk light that I designed and made in college. May revisit in the future
File:Dream Cathcers.jpg|Dream-Catchers, Materials sourced from a kit, but can be easily found in craft stores here.
File:RC Car From Scratch.jpg|An RC car that I designed and pulled together in secondary school. 3Dprinting, perspex, metalturning.
File:Wood turned spinningtops.jpg|Spinning tops
File:Woodturned Pen.jpg|Rosewood Pen
File:String art sign.jpg|a non-typical use for String-Art
File:Wire model scorpians.jpg|Re-purposing old electrical cables
File:Fixed plant pot.jpg|Kintsugi Hack
File:Bike Lock Holder.jpg|link=https://www.printables.com/model/408279-abus-bordo-lock-holder/files |''Bike lock Holder ''
File:SNowflake.jpg|link=[[Project:Snowflake]]|''Snoflakes''
File:SS Rack Plans.png|link=[[Apartment shoe rack]]|Apartment Shoe Rack
</gallery>
-----------------

== Machines/ Tool Access==
[https://comakingspace.webling.eu/portal#/ '''<big>Members Portal-Login to see your completed introductions etc</big>''']<div style="column-count:2">
*'''<big>Tutor Introuctions</big>'''
**[[3D Printer Introduction|3D Printing]]
**[[Bench Grinder Introduction|Bench Grinder]]
**[[Chop Saw Introduction|Chop Saw]]
**[[Compressor Introduction|Compressor]]
**[[Drill Introduction|Drills]]
**[[Handheld Circular Saw Introduction|Handheld Circular Saw]]
**[[Handheld Router Introduction|Router]]
**[[Heat Introduction|Heat gun, Hot glue, Hot air soldering, Pyrography burner]]
**[[Hand Planes]]
**[[Jointer-Planer Introduction|Jointer Planer]]
**[[Laser Cutter Introduction|Laser Cutter]]
**[[Router Table]]
**[[Sewing Machine Introduction|Sewing Machine]]
**[[Soldering Iron Introduction|Soldering]]
**[[Table Saw Introduction|Table Saw]]
**[[Vertical Bandsaw Introduction|Vertical Bandsaw]]
**[[Woodturning Introduction|Woodturning]]

*'''<big>Wiki / 'R.T.F.M' Intros</big>'''
**[[Personal Protection|PPE some available to share, better to have your own]]
**[[Clamps]]
**[[Hacksaws]]
**[[Festool CTM26 E AC (1)|Shop Vacs]]
**[[Files|Files from the space (not owned by an individual)]]
**[[Bevel Edge Chisels]]
**[[Punches]]
**[[Vises]]
**[[Laser Printers]]
**[[Laminator]]
**[[Paper Cutter]]
**.
**.
**.
**.
**.
**.
</div>
==Sometimes 2 heads are better than 1==
Céad Míle Fáilte, 100.000 Welcomes, Herzlichen Wilkommen!
This section is where I might schowcase some things I have helped others with around the space.
If you could use some help with anything in these specific, or other, areas I am always happy to chat and bounce ideas.
=== Madlén Stange Schrank ===
<gallery heights="150" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Madlén foot V1.jpg|alt=Maldén V1 foot
File:Madlén V1 in situ.jpg
File:Madlén `V1.1 Parts.jpg
File:Madlén V2 Prusa layout.png
</gallery>

=== Mamad Baby Bugatti 3D Part ===
<gallery heights="150" mode="packed-overlay" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Mamad 3D Model.png
</gallery>

Greggersen Ergomax

2026-06-24T18:10:04Z

Finno: /* Greggersen Ergomax */

==Greggersen Ergomax==
{{MachineInfoBox
|machine name=Greggersen Ergomax
|german=Hartlötgerät
|image=Ergomax.jpeg
|synonyms=Gaz brazing torch, Brazing burner, Lötbrenner
|manual=[https://www.kaeltetechnik-shop.at/mediafiles/Sonstiges/Greggersen/Greggersen_IND_Bedienungsanleitung_Ergomax_Plus.pdf Manual]
|material=Copper, Brass, Bronze, Iron, Steel
|used with=
|similar=
|software=
|firmware=
|assetid=
}}Handhabung vor dem Zünden: Die Bestückung des Gerätes ist variabel, d.h. es können verschiedene Einsätze (Düsen) gewählt werden, je nachdem welche Größe die Flamme haben soll. Beim Transport soll der Druckminderer von der Flasche getrennt werden.

Flaschen senkrecht mit dem Ventil nach oben stellen.

Schlauch komplett abrollen. Flaschenventile langsam öffnen und Sauerstoffdruck einstellen.

Zünden: Zuerst das Sauerstoffventil und dann das Brenngasventil öffnen. Dann Zündfunken erzeugen. Mit dem Brenngasventil nachregulieren, bis ein scharf um rissener blau-grüner Kegel sichtbar wird!

Abstellen: Zuerst das Brenngas-, dann das Sauerstoffventil schließen.

Nach Beendigung der Arbeit Flaschenventile schließen; Schläuche durch kurzes Öffnen der Brennerventile entlasten.

Befüllen der kleinen Propangasflasche: mittels des Umfüllstutzens. Die Vorratsflasche muss auf dem Kopf stehend stabil aufgehängt werden, erst dann wird die Schutzkappe entfernt und der Umfüllstutzen befestigt.

Befüllen der Sauerstoffflasche: Deren Ventile müssen fett- und staubfrei sein. Verbindung über speziellen Umfüllstutzen. Kleine Flasche öffnen, dann langsam die große Flasche öffnen.

{{Commissioning
|IssueNumber=452
|Naming=
|NamingComment=
|Picture=
|PictureComment=
|Manual=
|ManualComment=
|Documentation=
|DocumentationComment=
|QR=
|QRComment=
|Introduction=
|IntroductionComment=
|Security=
|SecurityComment=
|Test=
|TestComment=
|OwnerValue=
|OwnerValueComment=
|Availability=
|AvailabilityComment=
}}

Greggersen Ergomax

2026-06-24T18:04:46Z

Finno: /* Greggersen Ergomax */

Project:Pen Turning

2026-04-01T10:04:54Z

Finno: trying to add structure

Project:Pen Turning

2026-04-01T09:58:46Z

Finno: Gallery for pen turning process images

{{ProjectInfoBox
|project title=Pen Turning
|image=Finished Pen.jpeg
|status=Ongoing
|initiator=User:Finno
|materials= Wood, Pen Kits, Adhesives
|tools=Wood Lathe/ Drillbits/ Pen Turning Kit
}}
-----------------
=== Pen Turning Process</small> ===
<gallery heights="200" mode="packed-hover" caption="'[[Project:Navigation Galleries|Navigation Gallery]]' - Click to view projects">
File:Pen turning tools.jpeg
File:Pen turning 1.jpeg
File:Pen turning 2.jpeg
File:Pen turning 3.jpeg
File:PXL 20241216 123507726.MP.jpg
File:Pen Assy Start.jpg
File:Pen assy Parts.jpg
File:Pen assy layout.jpg
File:Penn assy press in.jpg
File:Pen Assy Complete.jpg
File:Finished Pen.jpeg
File:Woodturned Pen.jpg
</gallery>
-----------------

Project:Pen Turning

2026-04-01T09:50:34Z

Finno: Storing file name before organising page

{{ProjectInfoBox
|project title=Pen Turning
|image=Finished Pen.jpeg
|status=Ongoing
|initiator=User:Finno
|materials= Wood, Pen Kits, Adhesives
|tools=Wood Lathe/ Drillbits/ Pen Turning Kit
}}

File:Pen turning tools.jpeg
File:Pen turning 1.jpeg
File:Pen turning 2.jpeg
File:Pen turning 3.jpeg
File:PXL 20241216 123507726.MP.jpg
File:Pen Assy Start.jpg
File:Pen assy Parts.jpg
File:Pen assy layout.jpg
File:Penn assy press in.jpg
File:Pen Assy Complete.jpg
File:Finished Pen.jpeg
File:Woodturned Pen.jpg

File:Pen Assy Complete.jpg

2026-04-01T09:48:51Z

Finno:

File:Penn assy press in.jpg

2026-04-01T09:48:20Z

Finno:

File:Pen assy layout.jpg

2026-04-01T09:47:47Z

Finno:

File:Pen assy Parts.jpg

2026-04-01T09:47:21Z

Finno:

File:Pen Assy Start.jpg

2026-04-01T09:46:55Z

Finno:

File:PXL 20241216 123507726.MP.jpg

2026-04-01T09:42:34Z

Finno:

File:Pen turning 3.jpeg

2026-04-01T09:42:07Z

Finno:

File:Pen turning 2.jpeg

2026-04-01T09:41:33Z

Finno:

File:Pen turning 1.jpeg

2026-04-01T09:40:42Z

Finno:

Project:Pen Turning

2026-04-01T09:37:56Z

Finno: Added Project Info Box

File:Finished Pen.jpeg

2026-04-01T09:37:13Z

Finno:

File:Pen turning tools.jpeg

2026-04-01T09:36:22Z

Finno:

Project:Pen Turning

2026-04-01T09:32:31Z

Finno: Stated the project page my penturning in the space

THis page will be about Pen turning.

Project:Foiling

2026-04-01T09:28:47Z

Finno: /* How Does Crafting with Foil Work? */

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil'/ (Digital/ toner foils)(Sleeking Foils), becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with printer toner/ UV digital inks and varnishes, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]
[[File:Foining v2 clip shiny.mp4|300px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. The Canon Printer that is now in the Space works wonderfully for this process

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you. there is also an arrow drawn on the device for direction of feed)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling/ Overprinting images==
The process is almost the same as written above, however some minor changes need to be made. You need to foil you can spilt your design up into multiple 'layers' or stages/ Pages.

Take the V2 of my members wall picture for example;
This was a 2 page PDF, the pages were the same size.
The first page was all of the area I wanted the blue foil to be.
The second page was the image that I wanted.

* Print the 1st Page then foil it.
* Put the same sheet back into the printer and print the 2nd Page/ foil the second colour.
* and so on for as many layers as your design requires

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this easy.**'''

Project:Foiling

2026-04-01T09:27:36Z

Finno: /* Multi colour foiling/ Overprinting images */

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil'/ (Digital/ toner foils), becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with printer toner/ UV digital inks and varnishes, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]
[[File:Foining v2 clip shiny.mp4|300px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. The Canon Printer that is now in the Space works wonderfully for this process

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you. there is also an arrow drawn on the device for direction of feed)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling/ Overprinting images==
The process is almost the same as written above, however some minor changes need to be made. You need to foil you can spilt your design up into multiple 'layers' or stages/ Pages.

Take the V2 of my members wall picture for example;
This was a 2 page PDF, the pages were the same size.
The first page was all of the area I wanted the blue foil to be.
The second page was the image that I wanted.

* Print the 1st Page then foil it.
* Put the same sheet back into the printer and print the 2nd Page/ foil the second colour.
* and so on for as many layers as your design requires

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this easy.**'''

Project:Foiling

2026-04-01T09:27:09Z

Finno: /* Multi colour foiling */ description updated

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil'/ (Digital/ toner foils), becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with printer toner/ UV digital inks and varnishes, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]
[[File:Foining v2 clip shiny.mp4|300px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. The Canon Printer that is now in the Space works wonderfully for this process

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you. there is also an arrow drawn on the device for direction of feed)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling/ Overprinting images==
The process is almost the same as written above, however some minor changes need to be made. You need to foil you can spilt your design up into multiple 'layers' or stages/ Pages.

Take the V2 of my members wall picture for example;
This was a 2 page PDF, the pages were the same size.
The first page was all of the area I wanted the blue foil to be.
The second page was the image that I wanted.

* Print the 1st Page then foil it.
* Put the same sheet back into the printer and print the 2nd Page/ foil the second colour.
* and so on for as many layers as your design requires

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this easy, but not perfect as the pages move quite a bit when being printed. so very detailed design requiring tight registrtion may not yield the best results.**'''

Project:Foiling

2026-04-01T09:18:17Z

Finno: /* 3. Foiling */ text update

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil'/ (Digital/ toner foils), becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with printer toner/ UV digital inks and varnishes, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]
[[File:Foining v2 clip shiny.mp4|300px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. The Canon Printer that is now in the Space works wonderfully for this process

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you. there is also an arrow drawn on the device for direction of feed)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling==
The process is almost the same as written above, however some minor changes need to be made. Depending on the size of the area that you need to foil you can spilt your design up into multiple 'layers' or stages.

* Print the 1st stage then foil it.
* Put the same sheet back into the printer and print the 2nd stage and foil it,
* and so on for as many layers as you need.

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this more favourable than the next method.**'''

Which is to print the full design and try to place lots of small pieces of different coloured foil at the same time. The foil is really thin and can be a pain to work with/ handle as you want to keep it smooth for the best results.

Project:Foiling

2026-04-01T09:16:24Z

Finno: Updated text for v2 and new printer in the space

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil'/ (Digital/ toner foils), becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with printer toner/ UV digital inks and varnishes, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]
[[File:Foining v2 clip shiny.mp4|300px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. The Canon Printer that is now in the Space works wonderfully for this process

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you.)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling==
The process is almost the same as written above, however some minor changes need to be made. Depending on the size of the area that you need to foil you can spilt your design up into multiple 'layers' or stages.

* Print the 1st stage then foil it.
* Put the same sheet back into the printer and print the 2nd stage and foil it,
* and so on for as many layers as you need.

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this more favourable than the next method.**'''

Which is to print the full design and try to place lots of small pieces of different coloured foil at the same time. The foil is really thin and can be a pain to work with/ handle as you want to keep it smooth for the best results.

Project:Foiling

2026-04-01T09:13:24Z

Finno:

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil'/ (Digital/ toner foils), becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with printer toner/ UV digital inks and varnishes, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]
[[File:Foining v2 clip shiny.mp4|300px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. (I did have some issues with this and needed to use the printer and port names to find it and then select the correct driver from a long list.)

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you.)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling==
The process is almost the same as written above, however some minor changes need to be made. Depending on the size of the area that you need to foil you can spilt your design up into multiple 'layers' or stages.

* Print the 1st stage then foil it.
* Put the same sheet back into the printer and print the 2nd stage and foil it,
* and so on for as many layers as you need.

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this more favourable than the next method.**'''

Which is to print the full design and try to place lots of small pieces of different coloured foil at the same time. The foil is really thin and can be a pain to work with/ handle as you want to keep it smooth for the best results.

Project:Foiling

2026-04-01T09:09:55Z

Finno: Added Video clip

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

=='''!!!QR CODE IS DEAD!!!'''==
==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil', becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with laser printer toner, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]
[[File:Foining v2 clip shiny.mp4|300px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. (I did have some issues with this and needed to use the printer and port names to find it and then select the correct driver from a long list.)

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you.)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling==
The process is almost the same as written above, however some minor changes need to be made. Depending on the size of the area that you need to foil you can spilt your design up into multiple 'layers' or stages.

* Print the 1st stage then foil it.
* Put the same sheet back into the printer and print the 2nd stage and foil it,
* and so on for as many layers as you need.

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this more favourable than the next method.**'''

Which is to print the full design and try to place lots of small pieces of different coloured foil at the same time. The foil is really thin and can be a pain to work with/ handle as you want to keep it smooth for the best results.

File:Foining v2 clip shiny.mp4

2026-04-01T09:05:36Z

Finno:

Project:Foiling

2026-04-01T08:56:21Z

Finno: Added a new picture

{{ProjectInfoBox
|project title=Foiling
|image=Foiling V2 memberswall.jpeg
|status=Complete
|initiator=User:Finno
|materials= Paper/Card/Reactive Transfer Foil
|tools=Laser printer/laminator/ Computer
|software=Word, Illustrator, Inkscape
}}

=='''!!!QR CODE IS DEAD!!!'''==
==Foil Blocking / Foiling / Heiß Folie Prägung but *make it D.I.Y*==

Normally done with foil,heat and pressure. An image plate is machined into a metal plate and then heated and pressed into the piece with the foil inbetween the plate and the paper or substrate. You can get specialed machienes to do this process. It is ofetn seen in leather working, book binding and letterpress.
== How Does Crafting with Foil Work? ==
I saw a couple of instagram reels showing the results and did a bit of research. I watched a few youtube videos [https://youtu.be/5gpUS2R-VBc?si=mvGBEW_TiupkZX3e LIKE THIS ONE] and also found [https://www.scrapbook.com/articles/crafting-with-foil THIS ARTICLE].

I have used 'Reactive tranfer foil', becuase I didnt want to spend a lot of money on somewhat speacilized equipment/ chemical/ adhesives. This type of foil can react with laser printer toner, and when I figured out that the space already had a Laser printer and a laminator it made this fun craft more accessible.

I bought [https://www.amazon.de/dp/B091PHVJ23?ref=ppx_yo2ov_dt_b_product_details&th=1 THIS] foil multipack on amazon that seems to work okay, at least in the first test or two. Which you can see for yourself in the picture and video below.

[[File:Foil Peel Video - Trim.mp4|200px|left]]
[[File:Member wall poster.jpg|300px|centre-left]]
[[File:Foiling V2 memberswall.jpeg|250px|centre-right]]

== Process ==
<big>Process pictures are in the works, check back soon :) </big><big> </big>

===== <big>1. Getting your design ready </big> =====
The nice thing about this method is that you dont need to have any specific design software to create the files for your projects, but they do make it a little easier (If you have access and know how to use them or can put the time into learning them).

For the first test I used the 'Members wall' poster template because I had not yet made one. This is a word file that I edited and printed it directly from word when I was finished.

===== <big>2. Printing </big> =====
You will see from your own research that any random printer might not work for this process. It needs to be specifically a laser printer (I have read that some laser inks/toners may not work, but what we have in the space currenlty seems to be just fine).

To print the deigns you first need to be connected to the printer, instructions for doing that can be found on the [[Laser Printers|PRINTER PAGE]] on the WIKI. (I did have some issues with this and needed to use the printer and port names to find it and then select the correct driver from a long list.)

Once connected, ensure that you are printing in Black and White. The foil will really only stick to the Black printed area of your design.

===== <big>3. Foiling </big> =====
Turn on the laminator and allow it to come up to temperature. The instructions for the laminator in the space can be found [[Laminator|HERE]].

Once the design has been printed, cut a piece of foil to a size that just covers the printed deign. Then lay the foil, shiny side up, onto the printed deign. You can in theory run this through the laminator now, or you can place a sheet of blank paper under your work piece and over top of the foil and work piece.

Layers being; Blank paper - work piece - foil - blank paper.

Now pass the materials through the laminator. (With the laminator at the space you should start to feed the materials from the 'back' side with the power switch on the left facing towards you.)

===== <big>4. Next steps</big> =====
The satisfying part, as seen in the video above, peel the foil and you are done. If your material was already the finished size you need then yes you are done, otherwise use whatever method you prefer to cut project down to final size.

Further steps depending on the project and requirements can involve actually laminating the project in plastic or putting it in a protective sleeve.

==Multi colour foiling==
The process is almost the same as written above, however some minor changes need to be made. Depending on the size of the area that you need to foil you can spilt your design up into multiple 'layers' or stages.

* Print the 1st stage then foil it.
* Put the same sheet back into the printer and print the 2nd stage and foil it,
* and so on for as many layers as you need.

'''**You need to know which orientation to place it back into the printer tray for this to work but a quick test makes this more favourable than the next method.**'''

Which is to print the full design and try to place lots of small pieces of different coloured foil at the same time. The foil is really thin and can be a pain to work with/ handle as you want to keep it smooth for the best results.

File:Foiling V2 memberswall.jpeg

2026-04-01T08:53:52Z

Finno: