CoMakingSpace Wiki - User Contributions [en]

Kress CNC

2022-10-28T00:09:08Z

Diemex: 3000mm = 3m -> 300mm = 30cm

==Kress CNC==
{{MachineInfoBox
|machine name=Kress CNC Portal Mill
|german=CNC Portalfräse
|image=Kress_CNC.jpg
|synonyms=
|type=CNC Mill
|material=[[wood]], [[metal]]
|location=[[Location::CNC Area|CNC area]]
|status=[https://github.com/comakingspace/do-something/issues/267 do-something #267]
|firmware=
|software=
|manual=[https://www.lollette.com/support/pdf/CNC/SMC5-5.pdf Manual of the Controller Board]
|used with=[[endmills]]
|similar=[[CNC Router|CNC router]]
}}
This [[CNC Mill|CNC portal mill]] was bought used in 2022 from a maker that build and used it to machine aluminum parts for other CNCs. Main features and specs:

* Portal Mill driven by 3 stepper motors (23HS30-2804S)
*80kg steel & aluminum build, t-slot table
* Spindle: 800w China HF spindle with ER11 collet
* Work area: 300x360x80mm
* Controller: SMC5-5-N-N with jog-wheel
* Power Supply: Meanwell 48V 10A
* Stepper Drivers: 3x Leadshine DM556

=== Workflow ===
'''This is just an overview and does NOT replace the [[CNC Mill Introduction|personal introduction]]!'''

# Create the tool paths in a suitable CAM software (e.g. [[Fusion 360]])
# Post and export the correct [[G-code]] flavor as described below in Fusion 360 Setup
# Home the machine to zero the machine coordinates
# Secure your workpiece on the machine's bed using clamps or a vice screwed to the t-nut table. If you plan on cutting through the workpiece use a spoil board or machine vise
#Insert the appropriate collet & bit as defined in your tool paths
#Set your workpiece zero
#Put on [[PPE|personal protection]] and turn the spindle on
#Start your job from the USB stick. Always test new code "in the air" before cutting.

===Fusion 360 Setup===
# In a new set-up, import the [https://github.com/comakingspace/CommonFiles/blob/master/CNCFiles/KressCNC_machineconfig.machine machine file] from Github
# Edit the machine settings. Under "post processor", import the [https://github.com/comakingspace/CommonFiles/blob/master/CNCFiles/mach3mill_kress.cps post file]. Make sure to save the post under "local".
The SMC5-N-N-5 processor uses the "mach3" post processor. The one included in [[Fusion 360]] is reported to sometimes cause erratic behavior with this controller. The prepared post on Github is modified to avoid this (add link).

=== Machine Control===
The machine itself is mainly operated by the control panel located on the right side of the machine box and the jog-wheel (SMC5-5-N-N).

[[File:0 MainSwitch.jpg|thumb|left|The main switch turns on the power for the CNC, the spindle, light and the controller.]]

 '''Homing the machine:''' This CNC has no auto-home. '''Always run the homing operation as first step directly after startup!'''

[[File:1 Homing.jpg|thumb|left|Start by homing the machine. If the text „Reset“ blinks red on the screen, press the reset button (1). Press the “Origin Operation“ button (2). In the menu, select „Return To Home“ (3).]]

 '''Navigation basics:'''

On the panel, use the XYZ +/- buttons to move the spindle. Always home the spindle at the beginning of your session. If properly homed, softstop settings should prevent the spindle from crashing into the sides of the machine, but navigate with caution. (add info how to change the distance per button press on the panel)

When using the jogwheel, press the button on the left side and then move the wheel. The X1, X10, X100 switch controls how far the spindle moves per click of the wheel. If set to X1, one click is 1/100mm. X10 is 1/10th and at X100 one click moves 1mm.

'''Zeroing the machine coordinate''' on the workpiece origin:
<gallery>
File:2 CoordinateSystem.jpg|The coordinate system. Note that the machine zero point is in the top left front corner of the machine and the spindle moves down into the negative Z direction.
File:3 SetToolheight.jpg|Carefully move down the tooltip onto the reference plane of your workpiece (usually the surface). Wiggle a piece of paper in between the tooltip and the workpiece and move the head down in 0.1mm or smaller increments until you start to feel the resistance and scratching.
File:4 zeroZ.jpg|Press the „Coordinate Operation" button (1). Press „Z Auto Zero" to set zero of the work coordinate for Z in the current position.
File:5 WorkpieceZeroXY.jpg|Move the tooltip to the X and Y position that you have set up as your origin in the CAM software.
File:6 zeroXY.jpg|Zero the work coordinates for X and Y by pressing „X Axis Zero" and „Y Axis Zero" (1,2). You have now fully set-up the zero point of the work coordinates to be in line with the origin of your workpiece in CAM.
</gallery>

To '''load your program''', insert USB key with gcode

In the control-panel, select "File-Open" > USB > *.tap file > Open

Make sure the Machine Zero is set-correctly and compare it one more time to your fusion settings.

'''''Are you sure, that the height is correct and you are not cutting into the work table? Are you really sure? Good.'''''

Dust & chip protection: If you are milling metal, position the U-shaped protection box over the work table. If it is wood, also hook up the dust shoe and a vacuum cleaner!

Move your Z Axis up to clearance and start the spindle. Manually adjust the speed.

RUN > Restart starts the program

'''Stop and Emergency Stop''': In case of any issues don't hesitate to hit the big emergency stop (cuts all electricity to spindle and stepper motors) or for smaller issues the stop on the jog-wheel (stops the program, moves to home after reset).

After finished, shut down the spindle and wait until it came to a full stop. Be careful: Endmill will be very hot!

User:Diemex

2022-03-17T21:39:28Z

Diemex: Write about God and the world

Hey I am Max. I have been interested in making stuff for quite some time now, but was mostly limited to 3D printers as a tool. I like to modify things and machines to better suit my needs, mainly 3D printers. What happens often that the printer is modified to the point that it ends up being a new printer.

=== 3D Printers ===
I have had many 3d printers in my life time. The first was a Mendel90, which was one of the first good looking 3d printer kits back in 2013. After that I got a broken Tronxy P802 from eBay for 40€ including two rolls of ABS and fixed it within an afternoon.

===== Ender 3 CoreVz =====
[[File:PXL 20220110 185440411.jpg|none|thumb]]
Nowadays I still have an Ender 3 V2 frame, which has turned into a heavily modified machine with a fully custom all aluminium CoreXZ kinematic (similiar to the Voron Switchwire).
[[File:Ender 3 skeletonized backplate.jpg|none|thumb|Ender 3 skeletonized backplate]]

==== VzBot ====
[[File:VzBot Gantry.jpg|none|thumb|VzBot Gantry]]

I have been building a VzBot and contributing to the design a bit, mainly with aluminium skeletonized parts. This design style has become second nature to me and I use it everywhere were weight is of concern including my Ender 3.
[[File:VzBot Y gantry bracket.jpg|none|thumb|VzBot Y gantry bracket]]
My main contribution to the project is the y gantry bracket, which is now produced my Mellow in China and I had to purchase my own part lol.

=== CNC Machining ===
CNC machining is also one of my passions with a heavy focus on aluminium and especially extremely small parts that require small endmills in the 1-2mm range.

==== Stuff I make ====
[[File:Little disc.jpg|none|thumb|169x169px|Little disc]]
The part I make on my CNC are small, in the range of a button on a shirt or even smaller. Tiny holes, difficult to hold, but difficult and challenging.

==== Lil Sgt Chonky ====
[[File:Lil Chonker on the edge.jpg|none|thumb|433x433px|Lil Chonker on the edge]]
[[File:Lil Sgt Chonky in box.jpg|none|thumb|439x439px|Lil Sgt Chonky in box]]
To be able to machine small parts I built a small PrintNC named Lil Sgt Chonky ([https://wiki.printnc.info/en/home PrintNC wiki]).
[[File:Lil Chonky and his box.jpg|none|thumb|Lil Chonky and his box]]
To avoid noise getting on my nerves I built a soundproof enclosure and let the machine hang in it so the chips fall down.[[File:PXL 20220204 153730608.jpg|thumb|My CNC electronics (grblHal)|none|318x318px]]
I am really proud of my electronics, because it is the first time I spent significant effort on "trying to do it right" instead of the usual "jaja wird schon passen" attitude.

I go into detail about my CNC in a youtube video [https://youtu.be/ju0VupUnt00 Youtube video were I go into detail].

File:VzBot Gantry.jpg

2022-03-17T21:38:55Z

Diemex:

VzBot Gantry

File:Lil Chonky and his box.jpg

2022-03-17T21:29:49Z

Diemex:

Lil Chonky and his box

File:Lil Chonker on the edge.jpg

2022-03-17T21:27:51Z

Diemex:

Lil Chonker on the edge

File:My VzBot .jpg

2022-03-17T21:24:37Z

Diemex:

My VzBot

File:Lil Sgt Chonky in box.jpg

2022-03-17T21:20:41Z

Diemex:

Lil Sgt Chonky in box

File:Lil Sgt Chonky hanging.jpg

2022-03-17T21:18:29Z

Diemex:

Lil Sgt Chonky hanging

File:Lil Chonker in the corner.jpg

2022-03-17T21:13:09Z

Diemex:

Lil Chonker in the corner

File:Little disc.jpg

2022-03-17T21:09:02Z

Diemex:

Little disc

File:VzBot Y gantry bracket.jpg

2022-03-17T21:02:55Z

Diemex:

VzBot Y gantry bracket

File:Ender 3 skeletonized backplate.jpg

2022-03-17T21:00:52Z

Diemex:

Ender 3 skeletonized backplate

File:PXL 20220110 185440411.jpg

2022-03-17T20:57:47Z

Diemex:

Ender 3 CoreVZ FrontView

File:PXL 20220114 183248362.jpg

2022-03-17T20:55:44Z

Diemex:

Ender 3 CoreVz

User:Diemex

2022-03-17T20:55:10Z

Diemex: Add some stuff on CNC and 3D printing

File:PXL 20220204 153730608.jpg

2022-03-17T20:48:36Z

Diemex:

My CNC electronics

Waiting Lists

2022-03-15T07:17:46Z

Diemex: /* Metal Lathe Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]
*[[User:BenKenobi|Benedict]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]
*[[User:Diemex|Max]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]
*[[User:Diemex|Max]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Diemex|Max]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Max]]
* [[User:BenKenobi|Benedict]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Max]]
* [[User:BenKenobi|Benedict]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Max]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-15T07:17:18Z

Diemex: /* Laser Cutter Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]
*[[User:BenKenobi|Benedict]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]
*[[User:Diemex|Max]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]
*[[User:Diemex|Max]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Diemex|Max]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Max]]
* [[User:BenKenobi|Benedict]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Max]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-15T07:16:39Z

Diemex: /* Table Saw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]
*[[User:BenKenobi|Benedict]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]
*[[User:Diemex|Max]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]
*[[User:Diemex|Max]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Diemex|Max]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Max]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-15T07:16:02Z

Diemex: /* Jointer-Planer Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]
*[[User:BenKenobi|Benedict]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]
*[[User:Diemex|Max]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]
*[[User:Diemex|Max]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Diemex|Max]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Diemex]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-15T07:15:10Z

Diemex: /* CNC Router Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]
*[[User:BenKenobi|Benedict]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]
*[[User:Diemex|Max]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]
*[[User:Diemex|Max]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Diemex|Diemex]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Diemex]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-15T07:13:37Z

Diemex: /* Chop Saw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]
*[[User:BenKenobi|Benedict]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]
*[[User:Diemex|Max]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Diemex|Diemex]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Diemex]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-15T07:11:09Z

Diemex: /* Jointer-Planer Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]
*[[User:BenKenobi|Benedict]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Diemex|Diemex]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]
* [[User:BenKenobi|Benedict]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Diemex]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

User:Diemex

2022-03-11T07:06:59Z

Diemex: Created page with "Hey I am Max. I have been interested in making stuff for quite some time now, but was mostly limited to 3D printers as a tool. I like to modify 3D printers to the point in which it has nothing to do with the original printer anymore. My most recent printer is a modified Ender 3 which has been turned into a CoreXZ kinematic. CNC machining is also one of my passions with a heavy focus on aluminium and especially extremely small parts that require small endmills in the..."

Hey I am Max. I have been interested in making stuff for quite some time now, but was mostly limited to 3D printers as a tool.

I like to modify 3D printers to the point in which it has nothing to do with the original printer anymore.

My most recent printer is a modified Ender 3 which has been turned into a CoreXZ kinematic.

CNC machining is also one of my passions with a heavy focus on aluminium and especially extremely small parts that require small endmills in the 1-2mm range.

To be able to use my CNC I have built quite an elaborate enclosure in which my machine is hanging.

[https://youtu.be/ju0VupUnt00]

Waiting Lists

2022-03-10T19:44:08Z

Diemex: /* Arc Welding Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Diemex|Diemex]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Diemex]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-10T19:42:59Z

Diemex: /* Table Saw Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
* [[User:Diemex|Diemex]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-10T19:42:03Z

Diemex: /* Metal Lathe Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]
* [[User:Diemex|Diemex]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]

Waiting Lists

2022-03-10T19:41:03Z

Diemex: /* Laser Cutter Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> 
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed Green|Ed]]
* [[User:Bruh|Nana]]
*[[User:Paul|Paul G.]]
*

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 1 h + 20 min per member (to be confirmed)

Next Date: TBD - waiting for completion of the welding corner, [https://github.com/comakingspace/do-something/issues/199 everyone can help!]

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Blacksheep|Micha]]
* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Andreas|Andreas]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]

==[[Bandsaw Introduction]]==

Tutors: {{#show: Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''
* [[User:Ploenk]]
* [[User:Utis|Utis]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:HoerstJ|HoerstJ]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]

== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

* [[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Johanna|Johanna]]
* [[User:SvenG|SvenG]]
*[[User:Lepus|Nidal]]

== [[CNC Router Introduction]] ==

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Leo|Leo]]
* [[User:Hanna|Hanna]]
* [[User:Ed_Green]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Utis|Utis]]
* [[User:Lars|Lars]]
* [[User:Christoph|Christoph]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Compressor Introduction]] ==
Tutors:{{#show: Compressor Introduction
|?Tutor
| format=ul
}}Time required: < 15 min - not really worth a list...

Next Date: TBD

'''Waiting Members:'''

* [[User:Christoph|Christoph]]
* [[User:Mfisch3r|Markus]]
* [[User:St3ffi|Steffi]]
* [[User:AlexBaumgart|AlexBaumgart]]
* [[User:HoerstJ|HoerstJ]]
*[[User:Lepus|Nidal]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:BenKenobi|BenKenobi]]
* [[User:Utis|Utis]]
*[[User:MartinSte|Steven]]
*[[User:Jrosy|Jrosy]]
*[[User:Paul|Paul G.]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 20 min per member

Next Date: Sun, 2022-1-23

'''Waiting Members:'''

* [[User:Eileen|Eileen]]
*[[User:HoerstJ|HoerstJ]]
* [[User:Utis|Utis]]
* [[User:Woodkid|Lukas Mathur]]
*[[User:Lepus|Nidal]]
*[[User:Jrosy|Jrosy]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: 2022-3-5 (sign up [https://www.termino.gv.at/meet/b/c3f3642b86b533b6c03a9d8173904b06-114282 here])

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:PaulW|PaulW]]
* [[User:Christoph|Christoph]]
* [[User:SvenG|SvenG]]
*[[User:MartinSte|Steven]]
*[[User:Lepus|Nidal]]
* [[User:Diemex|Diemex]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

* [[User:ErikSchatz|Erik]]
* [[User:Utis|Utis]]

== [[Table Saw Introduction]] ==
Tutors: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2022-2-23, 19:00 (ask [[Keno]] about open slots!)

'''Waiting Members:'''

* [[User:Ozel|Oliver]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: ''TBD'' (last: 2021-11-20)

'''Waiting Members:'''

* [[User:Olli.Klos|Olli Klos]]
* [[User:Sebastian|Sebastian]]
* [[User:Ronanb|Ronan]]
*[[User:Jrosy|Jrosy]]
*[[User:MartinSte|Steven]]