CoMakingSpace Wiki - User Contributions [en]

D/T FeatherBoard (Feather Comb) M‑1407

2025-07-19T11:21:26Z

Cjaeck:

{{DISPLAYTITLE:FeatherBoards}}
{{DISPLAYTITLE:FeatherBoard}}

== Accessory: FeatherBoard ==

{{ToolInfoBox
|tool name=FeatherBoard
|german=Federklemme
|image=Featherboards routertable dualuse.jpg
|synonyms=Federklemme
|type=
|status=available
|material=[[wood]]
|used with=[[Router Table]], [[Table Saw]]
|location=
|access=
|made by=
|tutors=
|manual=
|similar=
}}'''Available as of July 2025''' – the '''Milescraft Dual/Tandem FeatherBoard (M‑1407)''' is now part of our equipment lineup. Designed for use in the T-slots of our Router Table, this 2‑in‑1 device enhances safety and precision.

==== 🛠 Description & Use-Cases ====
A versatile feather board that can be used:

* '''As two separate units''' for clamping small or narrow workpieces.
* '''Stacked with spacer''' for holding taller or wider stock securely

==== 📏 Technical Data ====

* '''Length:''' approx. 200 mm
* '''Adjustment range:''' ~130 mm
* Includes both '''5/8″ and 3/4″ guide/miter bars''' and '''T-slot bolts''', compatible with our router table and table saw rails

==== ✅ Features & Benefits ====

* Flat tension design enables consistent, reliable feed pressure and substantially '''reduces kick-back risk'''.
* Ergonomic knobs allow '''quick, secure clamping''' and easy adjustment.
* '''Two-in-one functionality''': separate units or tandem with spacer — ideal for diverse workpiece sizes

==== 📦 Included Scope ====
[[File:Scope featherboard.jpg|thumb]]
* 2 × FeatherBoard units
* 1 × Spacer for tandem use
* 4 × T-slot locking screws
* 2 × 5/8″ guide bars
* 2 × 3/4″ guide bars
* 2 x long screws for tandem use in u-profile
* 4 x short screws for single use in u-profiles
* 4 x black short screws for tandem use (SAFETY FEATURE)

==== ⚠️ Safety & Use Instructions ====

* Mount boards so that “fingers” apply light to firm pressure on the workpiece '''before it enters the bit'''.<gallery>
File:Featherboard correctuse.jpg|correct use.
File:Featherboard falseuse.jpg|false use!
</gallery>
* Adjust spacing and pressure for smooth movement without pinching.
* Always verify secure attachment of guide bars and fasteners.
* Dual use on router table:<gallery>
File:Featherboards routertable dualuse.jpg
</gallery>
* Tandem use:<gallery>
File:Featherboard tandem.jpg
File:Featherboard tandem1.jpg|alt=Only use u-profile guide bars!
File:Featherboard router correctuse.jpg
</gallery>Only use u-profile guide bars for tandem use! Fix the featherboards to the spacer with the 4 black screws!
*It's not recommended to use two featherboards in row in the same t- oder u-profile!
* Video: https://www.youtube.com/watch?v=yRG09xmT12I

==== 📦 Storage ====
Store the FeatherBoard next to the Router Table. Please return everything after use. Further accessories (e.g. srews for tandem use, guide bars etc.) can be found in the cabinet behind the router table

<gallery>
File:Featherboards storage.jpg
</gallery>{{DEFAULTSORT:FeatherBoard}}

D/T FeatherBoard (Feather Comb) M‑1407

2025-07-19T11:08:52Z

Cjaeck:

{{DISPLAYTITLE:FeatherBoards}}
{{DISPLAYTITLE:FeatherBoard}}

== Accessory: FeatherBoard ==

{{ToolInfoBox
|tool name=D/T FeatherBoard (Feather Comb) M‑1407
|german=Federklemme
|image=Featherboards routertable dualuse.jpg
|synonyms=Federklemme
|type=
|status=available
|material=[[wood]]
|used with=[[Router Table]], [[Table Saw]]
|location=
|access=
|made by=
|tutors=
|manual=
|similar=
}}'''Available as of July 2025''' – the '''Milescraft Dual/Tandem FeatherBoard (M‑1407)''' is now part of our equipment lineup. Designed for use in the T-slots of our Router Table, this 2‑in‑1 device enhances safety and precision.

==== 🛠 Description & Use-Cases ====
A versatile feather board that can be used:

* '''As two separate units''' for clamping small or narrow workpieces.
* '''Stacked with spacer''' for holding taller or wider stock securely

==== 📏 Technical Data ====

* '''Length:''' approx. 200 mm
* '''Adjustment range:''' ~130 mm
* Includes both '''5/8″ and 3/4″ guide/miter bars''' and '''T-slot bolts''', compatible with our router table and table saw rails

==== ✅ Features & Benefits ====

* Flat tension design enables consistent, reliable feed pressure and substantially '''reduces kick-back risk'''.
* Ergonomic knobs allow '''quick, secure clamping''' and easy adjustment.
* '''Two-in-one functionality''': separate units or tandem with spacer — ideal for diverse workpiece sizes

==== 📦 Included Scope ====

* 2 × FeatherBoard units
* 1 × Spacer for tandem use
* 4 × T-slot locking screws
* 2 × 5/8″ guide bars
* 2 × 3/4″ guide bars
* 2 x long screws for tandem use in u-profile
* 4 x short screws for single use in u-profiles
* 4 x black short screws for tandem use (SAFETY FEATURE)

==== ⚠️ Safety & Use Instructions ====

* Mount boards so that “fingers” apply light to firm pressure on the workpiece '''before it enters the bit'''.
* Adjust spacing and pressure for smooth movement without pinching.
* Always verify secure attachment of guide bars and fasteners.
* Video: https://www.youtube.com/watch?v=yRG09xmT12I

==== 📦 Storage ====
Store the FeatherBoard, spacer, guide bars, and mounting screws in the *'''no storage defined yet*''' next to the Router Table. Please return everything after use.

<gallery>
File:Featherboard.jpg
File:Featherboardtablesaw.jpg
File:Featherboardroutertable.jpg
File:Featherboardparts.jpg
</gallery>{{DEFAULTSORT:FeatherBoard}}

D/T FeatherBoard (Feather Comb) M‑1407

2025-07-19T11:08:04Z

Cjaeck: title changed

{{DISPLAYTITLE:FeatherBoard}}

== Accessory: FeatherBoard ==

{{ToolInfoBox
|tool name=D/T FeatherBoard (Feather Comb) M‑1407
|german=Federklemme
|image=Featherboards routertable dualuse.jpg
|synonyms=Federklemme
|type=
|status=available
|material=[[wood]]
|used with=[[Router Table]], [[Table Saw]]
|location=
|access=
|made by=
|tutors=
|manual=
|similar=
}}'''Available as of July 2025''' – the '''Milescraft Dual/Tandem FeatherBoard (M‑1407)''' is now part of our equipment lineup. Designed for use in the T-slots of our Router Table, this 2‑in‑1 device enhances safety and precision.

==== 🛠 Description & Use-Cases ====
A versatile feather board that can be used:

* '''As two separate units''' for clamping small or narrow workpieces.
* '''Stacked with spacer''' for holding taller or wider stock securely

==== 📏 Technical Data ====

* '''Length:''' approx. 200 mm
* '''Adjustment range:''' ~130 mm
* Includes both '''5/8″ and 3/4″ guide/miter bars''' and '''T-slot bolts''', compatible with our router table and table saw rails

==== ✅ Features & Benefits ====

* Flat tension design enables consistent, reliable feed pressure and substantially '''reduces kick-back risk'''.
* Ergonomic knobs allow '''quick, secure clamping''' and easy adjustment.
* '''Two-in-one functionality''': separate units or tandem with spacer — ideal for diverse workpiece sizes

==== 📦 Included Scope ====

* 2 × FeatherBoard units
* 1 × Spacer for tandem use
* 4 × T-slot locking screws
* 2 × 5/8″ guide bars
* 2 × 3/4″ guide bars
* 2 x long screws for tandem use in u-profile
* 4 x short screws for single use in u-profiles
* 4 x black short screws for tandem use (SAFETY FEATURE)

==== ⚠️ Safety & Use Instructions ====

* Mount boards so that “fingers” apply light to firm pressure on the workpiece '''before it enters the bit'''.
* Adjust spacing and pressure for smooth movement without pinching.
* Always verify secure attachment of guide bars and fasteners.
* Video: https://www.youtube.com/watch?v=yRG09xmT12I

==== 📦 Storage ====
Store the FeatherBoard, spacer, guide bars, and mounting screws in the *'''no storage defined yet*''' next to the Router Table. Please return everything after use.

<gallery>
File:Featherboard.jpg
File:Featherboardtablesaw.jpg
File:Featherboardroutertable.jpg
File:Featherboardparts.jpg
</gallery>{{DEFAULTSORT:FeatherBoard}}

D/T FeatherBoard (Feather Comb) M‑1407

2025-07-19T11:06:39Z

Cjaeck: some adds

== Accessory: FeatherBoard ==

{{ToolInfoBox
|tool name=D/T FeatherBoard (Feather Comb) M‑1407
|german=Federklemme
|image=Featherboards routertable dualuse.jpg
|synonyms=Federklemme
|type=
|status=available
|material=[[wood]]
|used with=[[Router Table]], [[Table Saw]]
|location=
|access=
|made by=
|tutors=
|manual=
|similar=
}}'''Available as of July 2025''' – the '''Milescraft Dual/Tandem FeatherBoard (M‑1407)''' is now part of our equipment lineup. Designed for use in the T-slots of our Router Table, this 2‑in‑1 device enhances safety and precision.

==== 🛠 Description & Use-Cases ====
A versatile feather board that can be used:

* '''As two separate units''' for clamping small or narrow workpieces.
* '''Stacked with spacer''' for holding taller or wider stock securely

==== 📏 Technical Data ====

* '''Length:''' approx. 200 mm
* '''Adjustment range:''' ~130 mm
* Includes both '''5/8″ and 3/4″ guide/miter bars''' and '''T-slot bolts''', compatible with our router table and table saw rails

==== ✅ Features & Benefits ====

* Flat tension design enables consistent, reliable feed pressure and substantially '''reduces kick-back risk'''.
* Ergonomic knobs allow '''quick, secure clamping''' and easy adjustment.
* '''Two-in-one functionality''': separate units or tandem with spacer — ideal for diverse workpiece sizes

==== 📦 Included Scope ====

* 2 × FeatherBoard units
* 1 × Spacer for tandem use
* 4 × T-slot locking screws
* 2 × 5/8″ guide bars
* 2 × 3/4″ guide bars
* 2 x long screws for tandem use in u-profile
* 4 x short screws for single use in u-profiles
* 4 x black short screws for tandem use (SAFETY FEATURE)

==== ⚠️ Safety & Use Instructions ====

* Mount boards so that “fingers” apply light to firm pressure on the workpiece '''before it enters the bit'''.
* Adjust spacing and pressure for smooth movement without pinching.
* Always verify secure attachment of guide bars and fasteners.
* Video: https://www.youtube.com/watch?v=yRG09xmT12I

==== 📦 Storage ====
Store the FeatherBoard, spacer, guide bars, and mounting screws in the *'''no storage defined yet*''' next to the Router Table. Please return everything after use.

<gallery>
File:Featherboard.jpg
File:Featherboardtablesaw.jpg
File:Featherboardroutertable.jpg
File:Featherboardparts.jpg
</gallery>

File:Featherboard tandem usage.jpg

2025-07-19T11:03:28Z

Cjaeck:

File:Featherboard tandem.jpg

2025-07-19T11:02:42Z

Cjaeck:

File:Featherboard tandem1.jpg

2025-07-19T11:02:15Z

Cjaeck:

File:Featherboard router correctuse.jpg

2025-07-19T11:01:30Z

Cjaeck:

File:Featherboards storage.jpg

2025-07-19T11:00:49Z

Cjaeck:

File:Featherboard falseuse.jpg

2025-07-19T10:59:16Z

Cjaeck:

File:Featherboard correctuse.jpg

2025-07-19T10:58:46Z

Cjaeck:

File:Featherboad correct.jpg

2025-07-19T10:58:11Z

Cjaeck:

File:Featherboards routertable dualuse.jpg

2025-07-19T10:57:18Z

Cjaeck:

File:Scope featherboard.jpg

2025-07-19T10:56:28Z

Cjaeck:

D/T FeatherBoard (Feather Comb) M‑1407

2025-07-12T09:46:56Z

Cjaeck: adding pictures

== Accessory: Milescraft D/T FeatherBoard (Feather Comb) M‑1407 ==

{{ToolInfoBox
|tool name=D/T FeatherBoard (Feather Comb) M‑1407
|german=Federklemme
|image=Featherboard.jpg
|synonyms=Federklemme
|type=
|status=available
|material=[[wood]]
|used with=[[Router Table]], [[Table Saw]]
|location=
|access=
|made by=
|tutors=
|manual=
|similar=
}}'''Available as of July 2025''' – the '''Milescraft Dual/Tandem FeatherBoard (M‑1407)''' is now part of our equipment lineup. Designed for use in the T-slots of our Router Table, this 2‑in‑1 device enhances safety and precision.

==== 🛠 Description & Use-Cases ====
A versatile feather board that can be used:

* '''As two separate units''' for clamping small or narrow workpieces.
* '''Stacked with spacer''' for holding taller or wider stock securely

==== 📏 Technical Data ====

* '''Length:''' approx. 200 mm
* '''Adjustment range:''' ~130 mm
* Includes both '''5/8″ and 3/4″ guide/miter bars''' and '''T-slot bolts''', compatible with our sauter-profile rails

==== ✅ Features & Benefits ====

* Flat tension design enables consistent, reliable feed pressure and substantially '''reduces kick-back risk'''.
* Ergonomic knobs allow '''quick, secure clamping''' and easy adjustment.
* '''Two-in-one functionality''': separate units or tandem with spacer — ideal for diverse workpiece sizes

==== 📦 Included Scope ====

* 2 × FeatherBoard units
* 1 × Spacer for tandem use
* 4 × T-slot locking screws
* 2 × 5/8″ guide bars
* 2 × 3/4″ guide bars

==== ⚠️ Safety & Use Instructions ====

* Mount boards so that “fingers” apply light to firm pressure on the workpiece '''before it enters the bit'''.
* Adjust spacing and pressure for smooth movement without pinching.
* Always verify secure attachment of guide bars and fasteners.
* Video: https://www.youtube.com/watch?v=yRG09xmT12I

==== 📦 Storage ====
Store the FeatherBoard, spacer, guide bars, and mounting screws in the *'''no storage defined yet*''' next to the Router Table. Please return everything after use.

<gallery>
File:Featherboard.jpg
File:Featherboardtablesaw.jpg
File:Featherboardroutertable.jpg
File:Featherboardparts.jpg
</gallery>

Sauter OFL2.0 Router Table

2025-07-12T09:33:01Z

Cjaeck: feather board in infobox

==Sauter OFL2.0 Router Table==
{{MachineInfoBox
|machine name=Sauter OFL2.0 Router Table
|german=Frästisch
|image=Sauter OFL2.0 Router Table.jpg
|synonyms=DE: Frästisch, Oberfrästisch, stationäre Oberfräse
|type=Router Table
|material=[[wood]]
|location=[[Location::Router Table|router table]]
|manual=[https://produkte.mafell.de/media/pdf/d7/c2/ab/fm800_fm1000_170558_0322_l.pdf Mafell FM1000]|assetid=154
|similar=[[Table Saw|table saw]]
|used with='''8 and 6 mm''' [[Router Bits|router bits]], [[Push Blocks|push blocks]],
[[D/T FeatherBoard (Feather Comb) M‑1407|feather boards]](optional)
}}

=== Setup ===
==== Router Bit ====
[[File:Sauter OFL2.0 Router Table Spindle unlocked.jpg.jpg|thumb|300x300px|Unlocked spindle]]
'''Router shaft size: 8mm, 6mm (by inserting the Bit Collet Reducer)'''

This router table spindle is equipped with a '''lever-action chuck''', therefore '''no tools are required to change the bit'''.
To release the chuck look '''under the table''' and pull the lever on the spindle towards the front of the table until it is horizontal. The spindle chuck is now release and the bit can be taken out or inserted. Push the lever down again until it is vertical to look the bit back in place. Make sure it is properly seated before starting up the spindle.
Ideally raise the router lift all the way up, insert the bit slightly above the desired position, then adjust it to the correct height. That way the bit shaft is inserted as much as possible and the dust extraction has the best seal with the router lift.

'''Changing the height''' is done via the '''adjustment knob on the top''' of face-plate of the router lift. Use the '''small tool''' located on the side of the router table to turn the knob. There shouldn't much torque needed to change the height; keep the top/bottom limits in mind if you feel a resistance. To avoid backlash in the lead screw, try to set the '''final height while raising''' the bit. Otherwise the lift may settle by a fraction of a millimetre.
Similarly the height can be '''locked/unlocked''' by turning the locking knob below one full rotation. Check that this lock is disengaged before adjusting the height. This lock only meant to stop vibrations changing the height of the router lift. It is not strong enough to stop you from adjusting the height (#not-a-bug #won't-fix).
[[File:Sauter OFL2.0 Router Table Changing Plates.jpg.jpg|thumb|Changing plates of the router table.]]
The router lift has '''differently sizes plates''' that are held in place via magnets. To remove a plate use the '''height adjust tool to lever''' it out of the router lift face plate. Unused plates are stored in the 3D-printed holders in front.

There is also a '''digital height gauge''' located on the left side of the router table. Press the "C" button the zero the height. The display can't be turned off.

As of '''July 2025''', we now offer a '''6 mm collet reducer''' that allows the use of 6 mm (¼″) router bits in the standard 8 mm spindle collet:

* Simply insert the 6 mm-to-8 mm collet reducer into the existing 8 mm spindle collet.
* Then insert the 6 mm bit and tighten the lever-action chuck as usual.
* Ensure the bit is seated properly — it should be firmly gripped with sufficient shaft depth to prevent vibration or slippage.

==== Fence ====
[[File:Sauter OFL2.0 Router Table Fence.jpg.jpg|thumb|Fence with gap open]]
The fence can be adjusted in depth via the '''two locking knobs''' that clamp in the two T-profiles inside the table.

The '''gap''' for the router bit can be adjusted by '''moving either aluminium plate''' to the side. Locking knobs are in the back.

The fence has to '''adjustable stop blocks''' that allow repeatable cutting of slots. It is best to just flip them up if they are not in use to avoid misplacing them.

Whenever possible use the '''transparent finger guard'''. Set it so it's just above your workpiece.
[[File:Sauter OFL2.0 Router Table Mitre Gauge.jpg.jpg|thumb|Mitre Gauge]]

==== Mitre Gauge ====
Similar to the table saw, the router table has a mitre gauge that runs inside the T-slot along the long side of the table. Adjust the angle as needed. The mitre gauge also has a '''depth stop''' similar to the ones on the fence. When not in use store the mitre gauge in the designated holder on the side of the table.

Don't cut into the mitre gauge!

==== Dust Extraction ====
Below the table is a '''designated shop vac''' that should '''turn on together with the router''' once the ON button is pressed. Because the dust extraction is need inside the lift as well as the fence, the vacuum hose is split. When the dust extraction at the fence is not needed unplug the hose from the fence and put the end into the "parking spot" in the back. This plugs the extraction path of the fence and allows more air to be extracted via the router lift below the table.

'''Closing the fence gap''' when not needed and '''using the transparent finger guard''' will improve the dust extraction significantly. Also when using router bits with a bearing, having the fence with an open gap behind it will avoid dust being thrown towards the back.

==== Videos ====
<gallery>
File:Sauter OFL2.0 Router Table Bit Height.webm|How to change the bit height.
File:Sauter OFL2.0 Router Table Fence Gap.webm|Fence gap adjustment.
File:Sauter OFL2.0 Router Table Guard.webm|Adjust finger guard.
File:Sauter OFL2.0 Router Table Fence Adjustment.webm|Adjust fence depth.
File:Sauter OFL2.0 Router Table Changing Bit.webm|Change bit and plate.
File:Sauter OFL2.0 Router Table In Action.webm|Usage example.
</gallery>

=== Parts ===
Here is the parts list for the complete router table in case a part breaks or someone wants to copy the design. Custom 3D printed parts can be found in the GitHub Repo: Coming Soon TM

* Router spindle - [https://www.sautershop.de/sauter-fraesmotor-mit-schnellspann-system-sa-fm1000-ofl SA-FM1000-OFL] similar to MAFELL Fräsmotor FM 1000 PV-WS
* Router lift - [https://www.sautershop.de/oberfraesenlift-ofl2.0-sa-ofl2.0 Sauter OFL2.0]
* Table surface - [https://www.sautershop.de/sauter-fraestischplatte-hpl-multiplex-1020-x-610-mm-sa-hpl3.0 SA-HPL3.0]
* Dust extractor - [https://www.kaercher.com/de/professional/sauger/nass-trockensauger/ap-klasse/nt-22-1-ap-l-13786000.html Kärcher NT 22/1 Ap L]
* Fence - [https://www.sautershop.de/sauter-fraesanschlag-fa-sa-2.0-schwinganschlaege-set-fa-sa20-flipstop Sauter Fräsanschlag FA-SA 2.0 + Schwinganschläge]
* Mitre Gauge - [https://www.sautershop.de/sauter-winkelanschlag-mit-anschlagschiene-fo-mgc-10 FO-MGC-10]
* 6x Item 40 Aluminium Profile 868mm
* 4x Item 40 Aluminium Profile 438mm
* Electronics
** [https://www.amazon.de/gp/product/B004AVIHKK/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1&language=de_DE Kemo M103N Master / Slave Switch]
** [https://www.amazon.de/gp/product/B07954GCXZ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1&language=de_DE KEDU KJD12-14]

D/T FeatherBoard (Feather Comb) M‑1407

2025-07-12T08:59:13Z

Cjaeck: Info inserted

== Accessory: Milescraft D/T FeatherBoard (Feather Comb) M‑1407 ==

{{ToolInfoBox
|tool name=D/T FeatherBoard (Feather Comb) M‑1407
|german=Federklemme
|image=Featherboard.jpg
|synonyms=Federklemme
|type=
|status=available
|material=[[wood]]
|used with=[[Router Table]] [[Table Saw]]
|location=
|access=
|made by=
|tutors=
|manual=
|similar=
}}'''Available as of July 2025''' – the '''Milescraft Dual/Tandem FeatherBoard (M‑1407)''' is now part of our equipment lineup. Designed for use in the T-slots of our Router Table, this 2‑in‑1 device enhances safety and precision.

==== 🛠 Description & Use-Cases ====
A versatile feather board that can be used:

* '''As two separate units''' for clamping small or narrow workpieces.
* '''Stacked with spacer''' for holding taller or wider stock securely

==== 📏 Technical Data ====

* '''Length:''' approx. 200 mm
* '''Adjustment range:''' ~130 mm
* Includes both '''5/8″ and 3/4″ guide/miter bars''' and '''T-slot bolts''', compatible with our sauter-profile rails

==== ✅ Features & Benefits ====

* Flat tension design enables consistent, reliable feed pressure and substantially '''reduces kick-back risk'''.
* Ergonomic knobs allow '''quick, secure clamping''' and easy adjustment.
* '''Two-in-one functionality''': separate units or tandem with spacer — ideal for diverse workpiece sizes

==== 📦 Included Scope ====

* 2 × FeatherBoard units
* 1 × Spacer for tandem use
* 4 × T-slot locking screws
* 2 × 5/8″ guide bars
* 2 × 3/4″ guide bars

==== ⚠️ Safety & Use Instructions ====

* Mount boards so that “fingers” apply light to firm pressure on the workpiece '''before it enters the bit'''.
* Adjust spacing and pressure for smooth movement without pinching.
* Always verify secure attachment of guide bars and fasteners.

==== 📦 Storage ====
Store the FeatherBoard, spacer, guide bars, and mounting screws in the *'''no storage defined yet*''' next to the Router Table. Please return everything after use.

D/T FeatherBoard (Feather Comb) M‑1407

2025-07-12T08:46:46Z

Cjaeck: Init

==$1==

{{ToolInfoBox
|tool name=D/T FeatherBoard (Feather Comb) M‑1407
|german=Federklemme
|image=Featherboard.jpg
|synonyms=Federklemme
|type=[[Router Table]]<nowiki>[[Table Saw]</nowiki>
|status=available
|material=[[wood]]
|used with=<nowiki>[Wood Lathe|wood lathe]]</nowiki>
|location=
|access=
|made by=
|tutors=
|manual=
|similar=
}}

Sauter OFL2.0 Router Table

2025-07-12T08:27:35Z

Cjaeck: Inserting information for the new 6. mm collet reducer

==Sauter OFL2.0 Router Table==
{{MachineInfoBox
|machine name=Sauter OFL2.0 Router Table
|german=Frästisch
|image=Sauter OFL2.0 Router Table.jpg
|synonyms=DE: Frästisch, Oberfrästisch, stationäre Oberfräse
|type=Router Table
|material=[[wood]]
|location=[[Location::Router Table|router table]]
|manual=[https://produkte.mafell.de/media/pdf/d7/c2/ab/fm800_fm1000_170558_0322_l.pdf Mafell FM1000]|assetid=154
|similar=[[Table Saw|table saw]]
|used with='''8 and 6 mm''' [[Router Bits|router bits]], [[Push Blocks|push blocks]]
}}

=== Setup ===
==== Router Bit ====
[[File:Sauter OFL2.0 Router Table Spindle unlocked.jpg.jpg|thumb|300x300px|Unlocked spindle]]
'''Router shaft size: 8mm, 6mm (by inserting the Bit Collet Reducer)'''

This router table spindle is equipped with a '''lever-action chuck''', therefore '''no tools are required to change the bit'''.
To release the chuck look '''under the table''' and pull the lever on the spindle towards the front of the table until it is horizontal. The spindle chuck is now release and the bit can be taken out or inserted. Push the lever down again until it is vertical to look the bit back in place. Make sure it is properly seated before starting up the spindle.
Ideally raise the router lift all the way up, insert the bit slightly above the desired position, then adjust it to the correct height. That way the bit shaft is inserted as much as possible and the dust extraction has the best seal with the router lift.

'''Changing the height''' is done via the '''adjustment knob on the top''' of face-plate of the router lift. Use the '''small tool''' located on the side of the router table to turn the knob. There shouldn't much torque needed to change the height; keep the top/bottom limits in mind if you feel a resistance. To avoid backlash in the lead screw, try to set the '''final height while raising''' the bit. Otherwise the lift may settle by a fraction of a millimetre.
Similarly the height can be '''locked/unlocked''' by turning the locking knob below one full rotation. Check that this lock is disengaged before adjusting the height. This lock only meant to stop vibrations changing the height of the router lift. It is not strong enough to stop you from adjusting the height (#not-a-bug #won't-fix).
[[File:Sauter OFL2.0 Router Table Changing Plates.jpg.jpg|thumb|Changing plates of the router table.]]
The router lift has '''differently sizes plates''' that are held in place via magnets. To remove a plate use the '''height adjust tool to lever''' it out of the router lift face plate. Unused plates are stored in the 3D-printed holders in front.

There is also a '''digital height gauge''' located on the left side of the router table. Press the "C" button the zero the height. The display can't be turned off.

As of '''July 2025''', we now offer a '''6 mm collet reducer''' that allows the use of 6 mm (¼″) router bits in the standard 8 mm spindle collet:

* Simply insert the 6 mm-to-8 mm collet reducer into the existing 8 mm spindle collet.
* Then insert the 6 mm bit and tighten the lever-action chuck as usual.
* Ensure the bit is seated properly — it should be firmly gripped with sufficient shaft depth to prevent vibration or slippage.

==== Fence ====
[[File:Sauter OFL2.0 Router Table Fence.jpg.jpg|thumb|Fence with gap open]]
The fence can be adjusted in depth via the '''two locking knobs''' that clamp in the two T-profiles inside the table.

The '''gap''' for the router bit can be adjusted by '''moving either aluminium plate''' to the side. Locking knobs are in the back.

The fence has to '''adjustable stop blocks''' that allow repeatable cutting of slots. It is best to just flip them up if they are not in use to avoid misplacing them.

Whenever possible use the '''transparent finger guard'''. Set it so it's just above your workpiece.
[[File:Sauter OFL2.0 Router Table Mitre Gauge.jpg.jpg|thumb|Mitre Gauge]]

==== Mitre Gauge ====
Similar to the table saw, the router table has a mitre gauge that runs inside the T-slot along the long side of the table. Adjust the angle as needed. The mitre gauge also has a '''depth stop''' similar to the ones on the fence. When not in use store the mitre gauge in the designated holder on the side of the table.

Don't cut into the mitre gauge!

==== Dust Extraction ====
Below the table is a '''designated shop vac''' that should '''turn on together with the router''' once the ON button is pressed. Because the dust extraction is need inside the lift as well as the fence, the vacuum hose is split. When the dust extraction at the fence is not needed unplug the hose from the fence and put the end into the "parking spot" in the back. This plugs the extraction path of the fence and allows more air to be extracted via the router lift below the table.

'''Closing the fence gap''' when not needed and '''using the transparent finger guard''' will improve the dust extraction significantly. Also when using router bits with a bearing, having the fence with an open gap behind it will avoid dust being thrown towards the back.

==== Videos ====
<gallery>
File:Sauter OFL2.0 Router Table Bit Height.webm|How to change the bit height.
File:Sauter OFL2.0 Router Table Fence Gap.webm|Fence gap adjustment.
File:Sauter OFL2.0 Router Table Guard.webm|Adjust finger guard.
File:Sauter OFL2.0 Router Table Fence Adjustment.webm|Adjust fence depth.
File:Sauter OFL2.0 Router Table Changing Bit.webm|Change bit and plate.
File:Sauter OFL2.0 Router Table In Action.webm|Usage example.
</gallery>

=== Parts ===
Here is the parts list for the complete router table in case a part breaks or someone wants to copy the design. Custom 3D printed parts can be found in the GitHub Repo: Coming Soon TM

* Router spindle - [https://www.sautershop.de/sauter-fraesmotor-mit-schnellspann-system-sa-fm1000-ofl SA-FM1000-OFL] similar to MAFELL Fräsmotor FM 1000 PV-WS
* Router lift - [https://www.sautershop.de/oberfraesenlift-ofl2.0-sa-ofl2.0 Sauter OFL2.0]
* Table surface - [https://www.sautershop.de/sauter-fraestischplatte-hpl-multiplex-1020-x-610-mm-sa-hpl3.0 SA-HPL3.0]
* Dust extractor - [https://www.kaercher.com/de/professional/sauger/nass-trockensauger/ap-klasse/nt-22-1-ap-l-13786000.html Kärcher NT 22/1 Ap L]
* Fence - [https://www.sautershop.de/sauter-fraesanschlag-fa-sa-2.0-schwinganschlaege-set-fa-sa20-flipstop Sauter Fräsanschlag FA-SA 2.0 + Schwinganschläge]
* Mitre Gauge - [https://www.sautershop.de/sauter-winkelanschlag-mit-anschlagschiene-fo-mgc-10 FO-MGC-10]
* 6x Item 40 Aluminium Profile 868mm
* 4x Item 40 Aluminium Profile 438mm
* Electronics
** [https://www.amazon.de/gp/product/B004AVIHKK/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1&language=de_DE Kemo M103N Master / Slave Switch]
** [https://www.amazon.de/gp/product/B07954GCXZ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1&language=de_DE KEDU KJD12-14]

Project:Nachttisch aus Eichenholz mit Schublade

2025-06-22T14:30:40Z

Cjaeck: /* Konstruktion */

{{ProjectInfoBox
|project title={{PAGENAME}}
|image=Nachttisch CJ.png
|status=planned
|date=
|initiator=Christian
|team=
|materials=Oak, Multiplex
|tools=
|software=
|cost=
}}
==Idee==
Die Idee ist, einen Nachttisch zu bauen. Dieser soll aus Eichenholz und mit einer Schublade ausgestattet sein. Die Schublade soll durch einen Teleskop-Vollauszug vollständig ausziehbar sein, um an alle Inhalte gut dran zu kommen.

==Konstruktion==
Als erstes habe ich das komplette Projekt im CAD nachgebildet. Dafür habe ich Creo Parametric von PTC verwendet.

Folgend ein paar Bilder von der Konstruktion:<gallery>
File:Nachttisch CJ Draufsicht Scharnier.png|alt=Bilder Konstruktion
File:Nachttisch CJ Schnitt.png
File:Nachttisch CJ Draufsicht.png
File:Nachttisch CJ.png
</gallery>Damit die 27mm Eichenbretter in der Frontansicht nicht zu wuchtig wirken und der Nachttisch ein wenig spannender wird, habe ich vor, die komplette Korpusfront mit einem Fräser anzufasen. Die Schublade soll im geschlossenen Zustand auch entsprechend bis zum Endpunkt der Fase in den Korpus versenkt werden.

==Planung==
Zur Planung habe ich einen Schnittplan erstellt. Hierfür habe ich im CAD die Eichenplatte nachkonstruiert und die Bauteile sinnvoll platziert:<gallery>
File:Nachttisch CJ Schnittplan.png
</gallery>Dabei habe ich darauf geachtet, dass die Maserung beim Korpus durchgängig verläuft.

Die Eichenplatte hat eine Baumkante, die ich natürlich auch mitverarbeiten wollte.

Die Eichenplatte hat eine Stärke von 27mm. Die Frontplatte der Schublade soll natürlich aus demselben Material sein. Um hier nicht zu viel Platz zu verlieren, werde ich die Frontplatte mit dem Dickenhobel auf 18mm runterhobeln.

Project:Nachttisch aus Eichenholz mit Schublade

2025-06-22T14:26:39Z

Cjaeck: /* Learnings */

{{ProjectInfoBox
|project title={{PAGENAME}}
|image=Nachttisch CJ.png
|status=planned
|date=
|initiator=Christian
|team=
|materials=Oak, Multiplex
|tools=
|software=
|cost=
}}
==Idee==
Die Idee ist, einen Nachttisch zu bauen. Dieser soll aus Eichenholz und mit einer Schublade ausgestattet sein. Die Schublade soll durch einen Teleskop-Vollauszug vollständig ausziehbar sein, um an alle Inhalte gut dran zu kommen.

==Konstruktion==
Als erstes habe ich das komplette Projekt im CAD nachgebildet. Dafür habe ich Creo Parametric von PTC verwendet.

Folgend ein paar Bilder von der Konstruktion:<gallery>
File:Nachttisch CJ Draufsicht Scharnier.png|alt=Bilder Konstruktion
File:Nachttisch CJ Schnitt.png
File:Nachttisch CJ Draufsicht.png
File:Nachttisch CJ.png
</gallery>

==Planung==
Zur Planung habe ich einen Schnittplan erstellt. Hierfür habe ich im CAD die Eichenplatte nachkonstruiert und die Bauteile sinnvoll platziert:<gallery>
File:Nachttisch CJ Schnittplan.png
</gallery>Dabei habe ich darauf geachtet, dass die Maserung beim Korpus durchgängig verläuft.

Die Eichenplatte hat eine Baumkante, die ich natürlich auch mitverarbeiten wollte.

Die Eichenplatte hat eine Stärke von 27mm. Die Frontplatte der Schublade soll natürlich aus demselben Material sein. Um hier nicht zu viel Platz zu verlieren, werde ich die Frontplatte mit dem Dickenhobel auf 18mm runterhobeln.

File:Nachttisch CJ Schnittplan.png

2025-06-22T14:22:58Z

Cjaeck:

Project:Nachttisch aus Eichenholz mit Schublade

2025-06-22T14:20:14Z

Cjaeck: /* Konstruktion */

File:Nachttisch CJ Draufsicht Scharnier.png

2025-06-22T14:12:48Z

Cjaeck:

File:Nachttisch CJ Schnitt.png

2025-06-22T14:12:21Z

Cjaeck:

File:Nachttisch CJ Draufsicht.png

2025-06-22T14:11:37Z

Cjaeck:

Project:Nachttisch aus Eichenholz mit Schublade

2025-06-22T14:09:09Z

Cjaeck: Init

File:Nachttisch CJ.png

2025-06-22T14:08:24Z

Cjaeck:

User:Cjaeck

2025-05-08T19:55:11Z

Cjaeck:

Hello there,

my name is Christian, friends just call me CJ. Im an mechatronic engineer and specialized in plastics.

In my free time I would like to do some woodwork in the shop.

My skillset is on 3D-Printing, programming microcontrollers, CAD and hopefully some woodworking in the future.

User:Cjaeck

2025-05-08T19:54:20Z

Cjaeck:

Waiting Lists

2025-05-08T19:47:50Z

Cjaeck: /* CNC Mill Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]
*[[User:Cjaeck|Christian Jäck]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:PaulVZ|Paul VZ]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[User:PaulVZ|Paul VZ]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]
*[[User:Cjaeck|Christian Jäck]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date:

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Jnafls|Johannnes]]
*[[User:Nicolai|Nicolai]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Cjaeck|Christian Jäck]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Cjaeck|Christian Jäck]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[NitramLegov|Martin]]
*[[User:Jakob|Jakob]]
*[[FabianM|Fabian]]
*[[User:Utis|Utis]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Lepus|Nidal]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Luzian]]
*[[LuLeBe|Leander Berg]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Pkalbers|Patrick A.]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Jnafls|Johannes]]
*Marc Werther

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

Waiting Lists

2025-05-08T19:44:19Z

Cjaeck: Add myself to list

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Cjaeck|Christian Jäck]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[User:PaulVZ|Paul VZ]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date:

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Jnafls|Johannnes]]
*[[User:Nicolai|Nicolai]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Cjaeck|Christian Jäck]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:PaulVZ|Paul VZ]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[NitramLegov|Martin]]
*[[User:Jakob|Jakob]]
*[[FabianM|Fabian]]
*[[User:Utis|Utis]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Lepus|Nidal]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Luzian]]
*[[LuLeBe|Leander Berg]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Pkalbers|Patrick A.]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Jnafls|Johannes]]
*Marc Werther

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

Waiting Lists

2025-05-08T19:42:12Z

Cjaeck: Add myself to list

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big> Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]]==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:PaulVZ|Paul VZ]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[User:PaulVZ|Paul VZ]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

==[[Jointer-Planer Introduction]]==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date:

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Jnafls|Johannnes]]
*[[User:Nicolai|Nicolai]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Cjaeck|Christian Jäck]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:PaulVZ|Paul VZ]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]

== [[Sliding Table Saw Introduction]] ==

[[Tutors]]: {{#show: Sliding Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

'''Waiting Members:'''
*[[NitramLegov|Martin]]
*[[User:Jakob|Jakob]]
*[[FabianM|Fabian]]
*[[User:Utis|Utis]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Lepus|Nidal]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Luzian]]
*[[LuLeBe|Leander Berg]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Pkalbers|Patrick A.]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:LuLeBe|Leander Berg]]
*[[User:Nicolai|Nicolai]]
*[[User:Pkalbers|Patrick A.]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]
*[[User:Jnafls|Johannes]]
*Marc Werther

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

Cjaeck

2025-05-07T18:14:04Z

Cjaeck: created redirect for user page

#REDIRECT [[User:Cjaeck]]

User:Cjaeck

2025-05-07T18:14:04Z

Cjaeck: create user page