CoMakingSpace Wiki - User Contributions [en]

Anmeldesystem

2020-11-07T05:03:13Z

Blacksheep:

WICHTIG: Im '''November 2020''' ist der Aufenthalt im Space, auch mit [[Hygienekonzept]], nur für maximal zwei Haushalte gleichzeitig möglich! Eine Mail dazu solltet ihr am Morgen des 2. November bekommen haben.

Zur Anmeldung haben wir uns diese Regeln überlegt, um diese Einschränkung möglichst fair zu gestalten:
* die Rahmenzeiten sind verbindlich - bitte weder überziehen noch "ins Blaue" blocken und dann erst viel später auftauchen!
* immer nur eine zukünftige Reservierung pro Person: also den nächsten Tag erst eintragen, wenn der aktuell reservierte angebrochen ist * möglichst mit einem Tag Vorlauf eintragen! So können wir Missverständnisse/Doppelbuchungen noch rechtzeitig bemerken
* '''sollte ein Schlüsselzugang entgegen dieser Regeln ohne Voranmeldung genutzt werden, müssen wir ihn leider ohne weitere Verwarnung bis zum Ende des Monats sperren'''

[[Management|Meldet euch]] gerne mit allen Fragen und Verbesserungsvorschlägen! Der Austausch mit anderen findet diesen Winter am besten von zuhause aus statt: schaut doch mal im [https://whereby.com/comakingspace whereby-Videochat] oder unseren anderen [[Community]]-Ressourcen vorbei :-)

== KW 45 (2.-8. November) ==
* Montag
** [[User Pages|Beispiel-Mitglied]] 7:00-8:10
** [[User:Gregor|Gregor]] 11:00-16:00
** [[User:Keno|Keno]] 19:00-22:00
** {{P}} 19:00-22:30

* Dienstag
** {{j}} 05:00-08:00
** [[User:Gregor|Gregor]] 11:30-15:30
** {{£}} + Gast aus anderem Haushalt 18:00-19:30

* Mittwoch
** {{P}} 22:00-23:00

* Donnerstag
** [[User:Gregor|Gregor]] 11:00-15:30
** Simon 15:30-17:30
** Einweisungsabend: {{£}} und max. 3 Bandsägen-Wartende 19:00-22:00
** {{£}} 22:00-02:00

* Freitag

* Samstag
** Simon 8:30-11:30
**[[Blacksheep|Micha]] -> Kann nicht - Slot 12:00 bis 18:00 ist frei!
**[[User:Mfisch3r|Markus]] & [[User:St3ffi|Steffi]] 14:00-20:00

* Sonntag

== KW 46 (9.-15. November) ==
* Montag

* Dienstag
** {{£}} 18:00-20:00
** [[User:Helmuth|Helmuth]] 18:00-20:00

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 47 (16.-22. November) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 48 (23.-29. November) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 49 (30. November - 6. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

Anmeldesystem

2020-11-07T05:00:04Z

Blacksheep:

WICHTIG: Im '''November 2020''' ist der Aufenthalt im Space, auch mit [[Hygienekonzept]], nur für maximal zwei Haushalte gleichzeitig möglich! Eine Mail dazu solltet ihr am Morgen des 2. November bekommen haben.

Zur Anmeldung haben wir uns diese Regeln überlegt, um diese Einschränkung möglichst fair zu gestalten:
* die Rahmenzeiten sind verbindlich - bitte weder überziehen noch "ins Blaue" blocken und dann erst viel später auftauchen!
* immer nur eine zukünftige Reservierung pro Person: also den nächsten Tag erst eintragen, wenn der aktuell reservierte angebrochen ist * möglichst mit einem Tag Vorlauf eintragen! So können wir Missverständnisse/Doppelbuchungen noch rechtzeitig bemerken
* '''sollte ein Schlüsselzugang entgegen dieser Regeln ohne Voranmeldung genutzt werden, müssen wir ihn leider ohne weitere Verwarnung bis zum Ende des Monats sperren'''

[[Management|Meldet euch]] gerne mit allen Fragen und Verbesserungsvorschlägen! Der Austausch mit anderen findet diesen Winter am besten von zuhause aus statt: schaut doch mal im [https://whereby.com/comakingspace whereby-Videochat] oder unseren anderen [[Community]]-Ressourcen vorbei :-)

== KW 45 (2.-8. November) ==
* Montag
** [[User Pages|Beispiel-Mitglied]] 7:00-8:10
** [[User:Gregor|Gregor]] 11:00-16:00
** [[User:Keno|Keno]] 19:00-22:00
** {{P}} 19:00-22:30

* Dienstag
** {{j}} 05:00-08:00
** [[User:Gregor|Gregor]] 11:30-15:30
** {{£}} + Gast aus anderem Haushalt 18:00-19:30

* Mittwoch
** {{P}} 22:00-23:00

* Donnerstag
** [[User:Gregor|Gregor]] 11:00-15:30
** Simon 15:30-17:30
** Einweisungsabend: {{£}} und max. 3 Bandsägen-Wartende 19:00-22:00
** {{£}} 22:00-02:00

* Freitag

* Samstag
** Simon 8:30-11:30
**[[Blacksheep|Micha]] -> Kann nicht - Slot ist frei!
**[[User:Mfisch3r|Markus]] & [[User:St3ffi|Steffi]] 14:00-20:00

* Sonntag

== KW 46 (9.-15. November) ==
* Montag

* Dienstag
** {{£}} 18:00-20:00
** [[User:Helmuth|Helmuth]] 18:00-20:00

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 47 (16.-22. November) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 48 (23.-29. November) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 49 (30. November - 6. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

Anmeldesystem

2020-11-07T04:59:36Z

Blacksheep:

WICHTIG: Im '''November 2020''' ist der Aufenthalt im Space, auch mit [[Hygienekonzept]], nur für maximal zwei Haushalte gleichzeitig möglich! Eine Mail dazu solltet ihr am Morgen des 2. November bekommen haben.

Zur Anmeldung haben wir uns diese Regeln überlegt, um diese Einschränkung möglichst fair zu gestalten:
* die Rahmenzeiten sind verbindlich - bitte weder überziehen noch "ins Blaue" blocken und dann erst viel später auftauchen!
* immer nur eine zukünftige Reservierung pro Person: also den nächsten Tag erst eintragen, wenn der aktuell reservierte angebrochen ist * möglichst mit einem Tag Vorlauf eintragen! So können wir Missverständnisse/Doppelbuchungen noch rechtzeitig bemerken
* '''sollte ein Schlüsselzugang entgegen dieser Regeln ohne Voranmeldung genutzt werden, müssen wir ihn leider ohne weitere Verwarnung bis zum Ende des Monats sperren'''

[[Management|Meldet euch]] gerne mit allen Fragen und Verbesserungsvorschlägen! Der Austausch mit anderen findet diesen Winter am besten von zuhause aus statt: schaut doch mal im [https://whereby.com/comakingspace whereby-Videochat] oder unseren anderen [[Community]]-Ressourcen vorbei :-)

== KW 45 (2.-8. November) ==
* Montag
** [[User Pages|Beispiel-Mitglied]] 7:00-8:10
** [[User:Gregor|Gregor]] 11:00-16:00
** [[User:Keno|Keno]] 19:00-22:00
** {{P}} 19:00-22:30

* Dienstag
** {{j}} 05:00-08:00
** [[User:Gregor|Gregor]] 11:30-15:30
** {{£}} + Gast aus anderem Haushalt 18:00-19:30

* Mittwoch
** {{P}} 22:00-23:00

* Donnerstag
** [[User:Gregor|Gregor]] 11:00-15:30
** Simon 15:30-17:30
** Einweisungsabend: {{£}} und max. 3 Bandsägen-Wartende 19:00-22:00
** {{£}} 22:00-02:00

* Freitag

* Samstag
** Simon 8:30-11:30
**[[Blacksheep|Micha]] Kann nicht - Slot ist frei
**[[User:Mfisch3r|Markus]] & [[User:St3ffi|Steffi]] 14:00-20:00

* Sonntag

== KW 46 (9.-15. November) ==
* Montag

* Dienstag
** {{£}} 18:00-20:00
** [[User:Helmuth|Helmuth]] 18:00-20:00

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 47 (16.-22. November) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 48 (23.-29. November) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

== KW 49 (30. November - 6. Dezember) ==
* Montag

* Dienstag

* Mittwoch

* Donnerstag

* Freitag

* Samstag

* Sonntag

Anmeldesystem

2020-11-02T07:31:00Z

Blacksheep: /* KW 45 (2.-8. November) */

Anmeldesystem

2020-11-02T07:29:47Z

Blacksheep:

Jointer-Planer Introduction/Waiting

2020-09-24T09:26:11Z

Blacksheep:

{{Waiting Page
|IntroLink=Jointer-Planer Introduction
|slots=
|next=
}}
* [[luzian]]
* [[johannes]]
* [[eileen]]
* [[User:Blacksheep|Micha]]
* ''link yourself here!''

Arc Welding Introduction/Waiting

2020-09-08T23:09:46Z

Blacksheep:

{{Waiting Page
|IntroLink=[[Arc Welding Introduction|arc welding introduction]]
|slots=2-3
|next=''TBD''
}}
* [[User:Drew|Drew]]
* {{M}}
* [[User:Blacksheep|Micha]]
* ''link yourself here!''

Bandsaw Introduction/Waiting

2020-09-08T23:08:44Z

Blacksheep:

{{Waiting Page
|IntroLink=[[Bandsaw Introduction|bandsaw introduction]]
|slots=2-4
|next=''TBD''
}}

* [[User:Blacksheep|Micha]]
* ''<add yourself here!>''
* ''<add yourself here!>''
* ''<add yourself here!>''

Laser Cutter Introduction/Waiting

2020-08-20T21:58:54Z

Blacksheep:

{{Waiting Page
|IntroLink=[[Laser Cutter Introduction|laser cutter introduction]]
|next=''soon''
}}
In order for everyone to get detailed hands-on experience, it does not make sense to have more than 3 people in one introduction. So link yourself quickly!

* next group:

* later
** [[User:Korbi|Korbi]]
** [[User:Hanna|Hanna]]
** [[User:Henrik|Henrik]]
** [[User:Utis|Utis]]
** [[User:Blacksheep|Micha]]
** ''<link yourself here!>''

Metal Lathe Introduction/Waiting

2020-03-09T12:32:58Z

Blacksheep:

{{Template:Waiting Page|IntroLink=[[Metal Lathe Introduction]] | next=TBD}}

* [[User:ErikSchatz|Erik]]
* [[User:Anton|Anton]]
* [[User:Leo|Leo]]
* [[User:Drew|Drew]]
* [[User:lmnl99|Luca]]
* [[User:Blacksheep|Micha]]

Talk:Plenum/Meeting minutes/2019-08-07

2019-08-08T15:28:05Z

Blacksheep: Created page with "I will arrange that the CNC Mill arrives the space soon. Maybe I will ask via Telegram for help as it needs to be carried out of our basement into the car and then brought fro..."

I will arrange that the CNC Mill arrives the space soon. Maybe I will ask via Telegram for help as it needs to be carried out of our basement into the car and then brought from Wiesloch to Heidelberg.
As we are actually in preperation of our movement to Mannheim my time is (again -.-) limited.

Talk:3D Printer Introduction/Waiting

2019-03-15T06:49:10Z

Blacksheep: Created page with "Can we arrange a date for next introduction? There are 4 ppl waiting since a while."

Can we arrange a date for next introduction? There are 4 ppl waiting since a while.

Talk:TEKA Vacuair UML 500

2018-11-30T17:29:02Z

Blacksheep: Created page with "There was a good article in one of the last German Maker magazine (Make 4/2018). If I remember correctly the costs were roundabout 400 euros."

There was a good article in one of the last German Maker magazine (Make 4/2018). If I remember correctly the costs were roundabout 400 euros.

3D Printer Introduction/Waiting

2018-11-30T17:13:43Z

Blacksheep:

The [[3D Printer Introduction|3D printer introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' ''TBD when there are 2-3 members waiting''

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

* [[User:Blacksheep|Micha (Blacksheep)]]
* ''<link yourself here!>''

CNC Router Introduction/Waiting

2018-11-30T17:12:24Z

Blacksheep:

The [[CNC Router Introduction|CNC router introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' ''TBD when there are 2-3 members waiting''

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

* [[User:Narquadah|Kim]]
* [[User:Blacksheep|Micha (Blacksheep)]]
* ''<link yourself here!>''

Laser Cutter Introduction/Waiting

2018-11-29T14:23:36Z

Blacksheep:

The [[Laser Cutter Introduction|laser cutter introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' 2018-11-30, 20:00 - approx 22:00

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

In order for everyone to get detailed hands-on experience, it does not make sense to have more than 5 people in one introduction. So link yourself quickly!

next group:
* [[User:NitramLegov|Martin]]
* [[User:Narquadah|Kim]]
* [[User:Johannes|Johannes]] vielleicht mit [[User:Luzian|Kind]]
* [[User:Ed Green|Ed]]
* ''<link yourself here!>''

later:
* [[User:Blacksheep|Micha (Blacksheep)]]
* ''<link yourself here!>''
* ''<link yourself here!>''
* ''<link yourself here!>''
* ''<link yourself here!>''

User:Blacksheep

2018-11-14T13:36:58Z

Blacksheep:

[[File:make_bs.jpg|right|400px|Focus on targets!]]
== Blacksheep's Projects ==

=== Current Projects ===

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

https://www.youtube.com/watch?time_continue=2&v=eMySpqtiCpg

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

=== Planned Projects ===

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Wire cutter table to cut styropor / foam'''

A table with a heat wire to cut styropor / foam

=== Completed Projects ===

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router at eBay and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-11-14T13:35:51Z

Blacksheep:

[[File:make_bs.jpg|right|400px|Focus on targets!]]
== Blacksheep's Projects ==

=== Current Projects ===

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin
https://www.youtube.com/watch?time_continue=2&v=eMySpqtiCpg

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

=== Planned Projects ===

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Wire cutter table to cut styropor / foam'''

A table with a heat wire to cut styropor / foam

=== Completed Projects ===

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router at eBay and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

Handheld Router Introduction/Waiting

2018-11-14T13:27:56Z

Blacksheep: /* Interested Members */

The [[Handheld Router Introduction|handheld router introduction]] takes longer than many others and can't just be done during regular opening times. If you would like to receive it, please enter yourself below and we will find a good time once a few members are on the list!

'''Next introduction:''' ''TBD when there are 2-3 members waiting''

== Interested Members ==
Please link your [[Special:MyPage|user page]] after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

* ''<link yourself here!>''
[[User:Blacksheep]]

Talk:Plenum/Meeting minutes/2018-11-02

2018-11-04T21:06:18Z

Blacksheep:

Suggestion for the "Familientarif":

If we take an average family with two adults and 2 kids and all are being interested to become a member there is a ground fee for all of 100 Euros, if one takes a keycard 150 Euros per month.
That might be a lot of money for some familys.

So my suggestion is that if both adults of a family becomes a member the kids should be for free. As the adults are responsible for the kids (means the kids are not allowed to work without parental survey) they are always working as a team so they can't block any tools on their own.

If the kids needs an membership there should be a family membership available which takes care of this.
::My Two Cents: When it comes to rebates for a certain user-group (in this case families), I think we should consider a couple of points:
::1. Are we already in a position to grant rebates (financial dimension)
::2. What is the base for the rebates?
::3. What groups do we want to offer rebates for?
::The first point has to be answered by our managers.
::About point two: If we take up your suggestion, there could be two rebate bases: Either a mass rebate (4 new members only pay two memberships) or a social rebate (we want to ::support families).
::I would see a family rebate as a social thing. However (and this is a very personal statement), I think there are other groups which I would prioritize more when it comes to rebates. Namely I am speaking of people with lower or no income. In Heidelberg, this group is eligable to get a [https://www.heidelberg.de/hd,Lde/HD/Rathaus/Heidelberg_Pass.html Heidelberg Pass]. This would also cover families which might not be able to otherwise afford the membership of the space.
::For anybody who has enough money, I would personally not see the need of offering discounts. What the space offers is already very cheap. In the end we all get access to fully equipped workshops for just 25€/month. For just 50€ more we even get 24/7 access. I don´t think there are many other places which offer comparable services at such a price :)--[[User:NitramLegov|NitramLegov]] ([[User talk:NitramLegov|talk]]) 17:26, 4 November 2018 (CET)

::::Heidelberg Pass is a good hook and should be considered as well. What about the non-Heidelberger's?

::::However, I still have the opinion that paying 100 (150 Euros with one keycard for 24/7 access) for a family with two kids (again: the kids can't work on their own and block tools as they need parental survey) is too much. I don't see an argument
::::for what a kid should pay if it can't work on it's own in the makerspace except the possible fee required for insurance. Especially the statues of CoMakingspace states that it is one of the targets to provide a cost-efficient space to achieve

::::"Der Zweck der Gesellschaft ist die Förderung der Erziehung, Volks- und Berufsbildung einschließlich der Studentenhilfe sowie die Förderung von Kunst und Kultur."

::::In my example (two adults, two kids) this would be 1800 Euros per year. I would be able to pay as I am having a good job. But I am pretty sure that some familys (which might be above the line to be eligible for the Heidelberg Pass) this is too
::::much.

::::So in short my point is: Why should the kids pay full (25 Euros) if they can't work on their own because of insurance rules and therefore can't use/block any tool without a parent on their side? And the usage of the tool is already paid by
::::the parent. If kids only pay the fee required for insurance it will become automatically more family friendly. Of course we can discuss about the conditions (age of the kids, living in the same place etc) to prevent that a large family
::::with kids already living in their own space misuse the tariff.

::::IMHO we can't loose but win 2 adults membership plus the insurance fee for each kid per family. And the nowadays kids are the possible full members of tomorrow.

Talk:Plenum/Meeting minutes/2018-11-02

2018-11-04T03:22:24Z

Blacksheep: Created page with "Suggestion for the "Familientarif": If we take an average family with two adults and 2 kids and all are being interested to become a member there is a ground fee for all of 1..."

User:Blacksheep

2018-10-31T11:04:03Z

Blacksheep:

== Blacksheep's Projects == [[File:make_bs.jpg|right|400px|Focus on targets!]]

=== Current Projects ===

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

=== Planned Projects ===

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Wire cutter table to cut styropor / foam'''

A table with a heat wire to cut styropor / foam

=== Completed Projects ===

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router at eBay and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-10-31T11:03:14Z

Blacksheep:

== Blacksheep's Projects == [[File:make_bs.jpg|right|400px|caption]]

=== Current Projects ===

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

=== Planned Projects ===

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Wire cutter table to cut styropor / foam'''

A table with a heat wire to cut styropor / foam

=== Completed Projects ===

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router at eBay and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

File:Make bs.jpg

2018-10-31T11:00:46Z

Blacksheep:

User:Blacksheep

2018-10-31T10:47:32Z

Blacksheep:

== Blacksheep's Projects ==

=== Current Projects ===

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

=== Planned Projects ===

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Wire cutter table to cut styropor / foam'''

A table with a heat wire to cut styropor / foam

=== Completed Projects ===

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router at eBay and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-10-31T10:43:33Z

Blacksheep: /* Blacksheep's corner */

== Blacksheep's Projects ==

=== Current Projects ===

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

=== Planned Projects ===

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

=== Completed Projects ===

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router at eBay and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-10-31T10:42:28Z

Blacksheep:

== Blacksheep's corner ==

=== Current Projects ===

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

=== Planned Projects ===

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

=== Completed Projects ===

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-10-31T10:38:42Z

Blacksheep:

== Blacksheep's corner ==

'''Current Projects:'''

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Adding a 2W 455nm Laser to the CNC Router'''

Building a mount to add a 2W 455nm Laser to the CNC router to cut paper / foam

'''Planned Projects'''

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Completed Projects'''

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-10-31T10:37:00Z

Blacksheep:

== Blacksheep's corner ==

'''Current Projects:'''

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

An external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Planned Projects'''

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Completed Projects'''

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-10-31T10:36:37Z

Blacksheep:

== Blacksheep's corner ==

'''Current Projects:'''

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

A external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Planned Projects'''

'''Foundry to melt and cast aluminium / copper'''

A simple but secure foundry using an empty gas cylinder to melt alu & copper to cast objects.

'''Forge build from an empty fire extinguisher'''

A simple, gas driven forge build up from an empty fire extinguisher

'''Completed Projects'''

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

User:Blacksheep

2018-10-25T20:35:32Z

Blacksheep:

== Blacksheep's corner ==

'''Projects:'''

'''openSLA 3D Printer'''

A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

'''SC Deck'''

A external console with a TFT touchscreen to control several functions in the game Star Citizen

https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

'''Restauration of an old CNC Portal Router'''

Shoot an old CNC router and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.

https://www.youtube.com/watch?v=sbyFlTLGP9Q

Seminar Ideas

2018-10-25T16:14:44Z

Blacksheep:

Similar to the [[Event Ideas|event ideas]] page, this is a collection of ideas we are keeping until a good opportunity to organize them comes along. Seminars are like classes: the instructor should know the topic '''very well''' and be able to teach others step by step. However, you may suggest topics here even if you are not ready to teach about them yourself - we will see if someone else would be able to!

Once a seminar receives its own page it should be deleted from this list.

{| class="wikitable"
|-
! scope="col"| Topic
! scope="col"| Description
! scope="col"| Potential Instructors
! scope="col"| Material Cost
! scope="col"| Requirements
|-
! scope="row"| 3D Design Basics: Meshmixer
| digital sculpting from scratch or based on a 3D scan
| [[User:Lukas|Lukas]]
| -
| laptop & mouse
|-
! scope="row"| 3D Design Basics: Onshape
| browser-based parametric design
|
| -
| laptop & mouse
|-
! scope="row"| 3D Scanning Basics: Photogrammetry
| calculate shapes from a series of photos (AKA "structure from motion")
| [[User:Lukas|Lukas]]
| -
| ''camera'', laptop & mouse
|-
! scope="row"| 3D Scanning Basics: Kinect
| infrared depth sensor coupled with digital camera
|
| -
| ''Xbox "Kinect" camera'', laptop & mouse
|-
! scope="row"| Robot Arm Construction
| [http://littlearm.weebly.com/ LittleArm] or MeArm
| [[User:Mitja|Mitja]]
| servos, Arduino, CNC made parts
| Arduino knowledge
|-
! scope="row"| Hand Tool Woodworking Basics
| learn to use planes, chisels, hand saws - ''what would be a good example project?''
| [[Lukas]]
| wood? (scrap wood might be enough)
|
|-
! scope="row"| Hand Tool Joinery
| lap, bridle, mortise and tenon, dovetails - ''what would be good example project(s)?''
| [[Lukas]] (eventually)
| wood? (scrap wood might be enough)
| Hand Tool Woodworking Basics
|-
! scope="row"| Woodturning Basics
| learn to prepare stock and use the wood lathe - ''what would be a good example project?''
|
| wood
|
|-
! scope="row"| [[Raspberry Pi]]
| learn how to work with this mini computer, GUI vs. SSH, python, GPIO access & protocols (I²C, SPI, etc.), example projects?
| Andi, {{NL}}
|
| 1 pi/person , 1 breadboard/person, electronic components (resistors, LEDs, jumper cables, etc.)
|-
! scope="row"| tree trunk candle holders
| make simple but attractive tealight holders out of a log
| [[Lukas]]
| wood
|
|-
! scope="row"| "printing on wood"
| basic wood cutting(?) and sanding, artwork transfer (toner from paper)
| [[Lukas]]?
| wood, "mod podge"(?)
| none, could even be made safe for children
|
|-
! scope="row"| Debug Arduino
| Debug code on Arduino during runtime with Atmel ICE debugger
| [[Blacksheep]]
| -
| Just your time
|}

== Inspiration from Other Spaces ==
* [https://kunst-stoffe-berlin.de/offene-werkstatt-holzbearbeitung/ "Kunst-Stoffe Berlin" Holzkurse]

[[Category:Inspiration]]
[[Category:Seminars]]

Seminar Ideas

2018-10-25T16:14:29Z

Blacksheep:

Similar to the [[Event Ideas|event ideas]] page, this is a collection of ideas we are keeping until a good opportunity to organize them comes along. Seminars are like classes: the instructor should know the topic '''very well''' and be able to teach others step by step. However, you may suggest topics here even if you are not ready to teach about them yourself - we will see if someone else would be able to!

Once a seminar receives its own page it should be deleted from this list.

{| class="wikitable"
|-
! scope="col"| Topic
! scope="col"| Description
! scope="col"| Potential Instructors
! scope="col"| Material Cost
! scope="col"| Requirements
|-
! scope="row"| 3D Design Basics: Meshmixer
| digital sculpting from scratch or based on a 3D scan
| [[User:Lukas|Lukas]]
| -
| laptop & mouse
|-
! scope="row"| 3D Design Basics: Onshape
| browser-based parametric design
|
| -
| laptop & mouse
|-
! scope="row"| 3D Scanning Basics: Photogrammetry
| calculate shapes from a series of photos (AKA "structure from motion")
| [[User:Lukas|Lukas]]
| -
| ''camera'', laptop & mouse
|-
! scope="row"| 3D Scanning Basics: Kinect
| infrared depth sensor coupled with digital camera
|
| -
| ''Xbox "Kinect" camera'', laptop & mouse
|-
! scope="row"| Robot Arm Construction
| [http://littlearm.weebly.com/ LittleArm] or MeArm
| [[User:Mitja|Mitja]]
| servos, Arduino, CNC made parts
| Arduino knowledge
|-
! scope="row"| Hand Tool Woodworking Basics
| learn to use planes, chisels, hand saws - ''what would be a good example project?''
| [[Lukas]]
| wood? (scrap wood might be enough)
|
|-
! scope="row"| Hand Tool Joinery
| lap, bridle, mortise and tenon, dovetails - ''what would be good example project(s)?''
| [[Lukas]] (eventually)
| wood? (scrap wood might be enough)
| Hand Tool Woodworking Basics
|-
! scope="row"| Woodturning Basics
| learn to prepare stock and use the wood lathe - ''what would be a good example project?''
|
| wood
|
|-
! scope="row"| [[Raspberry Pi]]
| learn how to work with this mini computer, GUI vs. SSH, python, GPIO access & protocols (I²C, SPI, etc.), example projects?
| Andi, {{NL}}
|
| 1 pi/person , 1 breadboard/person, electronic components (resistors, LEDs, jumper cables, etc.)
|-
! scope="row"| tree trunk candle holders
| make simple but attractive tealight holders out of a log
| [[Lukas]]
| wood
|
|-
! scope="row"| "printing on wood"
| basic wood cutting(?) and sanding, artwork transfer (toner from paper)
| [[Lukas]]?
| wood, "mod podge"(?)
| none, could even be made safe for children
|
|-
! scope="row"| Debugg Arduino
| Debug code on Arduino during runtime with Atmel ICE debugger
| [[Blacksheep]]
| -
| Just your time
|}

== Inspiration from Other Spaces ==
* [https://kunst-stoffe-berlin.de/offene-werkstatt-holzbearbeitung/ "Kunst-Stoffe Berlin" Holzkurse]

[[Category:Inspiration]]
[[Category:Seminars]]

Blacksheep

2018-10-25T16:12:23Z

Blacksheep: Redirected page to User:Blacksheep

#REDIRECT [[User:Blacksheep]]

User:Blacksheep

2018-10-17T22:06:38Z

Blacksheep: /* Blacksheep's corner */

User:Blacksheep

2018-10-17T22:03:41Z

Blacksheep: Created page with " == Blacksheep's corner == '''Projects:''' openSLA 3D Printer A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin SC Deck A e..."

== Blacksheep's corner ==

'''Projects:'''

openSLA 3D Printer
A 150 mW with 405nm wavelength (UV) will be controlled with a Galvanometer to harden liquid resin

SC Deck
A external console with a TFT touchscreen to control several functions in the game Star Citizen
https://www.youtube.com/watch?v=ZYFCu7UMk0o&t=138s

Restauration of an old CNC Portal Router
Shoot an old CNC router and replaced the whole electronics and spend a 2.8 kW watercooled Spindle.