CoMakingSpace Wiki - User Contributions [en]

File:FeuerwehrEmblem.svg

2025-02-28T17:08:20Z

B--rian: Based on the vectorized version of https://www.feuerwehrverband.de/service/feuerwehr-signet/ Heavily modified to allow for laser-cutting.

== Summary ==
Based on the vectorized version of https://www.feuerwehrverband.de/service/feuerwehr-signet/
Heavily modified to allow for laser-cutting.
== Licensing ==
{{Unknown_copyright}}

Project:Jigsaw Puzzles

2025-02-26T20:01:02Z

B--rian: /* Puzzles Examples */

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress, still learning
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg contains both the image and the jigsaw pattern as layers. However, the pieces are rather small and the image is too dark.
* https://wiki.comakingspace.de/File:NewBornStencil.svg is a stencil to make A6 cards if your friends have a newborn baby. Not exactly a jigsaw, I know.

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# Choose a high-resolution color image for your puzzled wo. Adjust the brightness, contrast, and saturation using photo editing software.
# Convert your image to black-and white, using the method "[https://en.wikipedia.org/wiki/Dither dither]"
# Designing the puzzle pieces using a tool like Draradech (Manuel Kasten)'s amazing [https://github.com/Draradech/jigsaw Jigsaw SVG Generator].
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.
# You want to bring a little box or bag to put the puzzle pieces in, to carry them home safely.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

=== Tidy up and pay the bills ===
# Pack your puzzle into the box which you brought along.
# Shut-down all equipment, in the following order: Laser-cutter, water-cooler, and PC.
# Don't forget to donate — your contribution to the not-negligible power consumption 😉.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.'' The same is true for laser cutting jigsaw puzzles -- most likely, things will not immediately work, so here a few things I learned so far and other may profit from this experience:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Without a sacrifical material underneath your workpiece, puzzle pieces may will be cut incorrectly (purple ellipses) if tilted. Or they are cut only partially (purple rectangle), if the pieces left the party early.]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
* If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The lamella distance was bigger than the 2cm puzzle pieces of my first try.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

File:NewBornStencil.svg

2025-02-26T19:59:30Z

B--rian: Inspired by https://www.walmart.com/ip/Couple-Baby-Heart-Family-NewBorn-Love-Heart-Stencil-Template-Reusable-8-5-x-11-for-Painting-on-Walls-Wood-Etc-By-Stencilville/282470688

== Summary ==
Inspired by https://www.walmart.com/ip/Couple-Baby-Heart-Family-NewBorn-Love-Heart-Stencil-Template-Reusable-8-5-x-11-for-Painting-on-Walls-Wood-Etc-By-Stencilville/282470688
== Licensing ==
{{CC-by-sa-4.0}}

Project:Jigsaw Puzzles

2025-02-21T17:33:14Z

B--rian: /* Learnings and remarks */ Correcting spelling mistakes.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress, still learning
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg contains both the image and the jigsaw pattern as layers. However, the pieces are rather small and the image is too dark.

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# Choose a high-resolution color image for your puzzled wo. Adjust the brightness, contrast, and saturation using photo editing software.
# Convert your image to black-and white, using the method "[https://en.wikipedia.org/wiki/Dither dither]"
# Designing the puzzle pieces using a tool like Draradech (Manuel Kasten)'s amazing [https://github.com/Draradech/jigsaw Jigsaw SVG Generator].
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.
# You want to bring a little box or bag to put the puzzle pieces in, to carry them home safely.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

=== Tidy up and pay the bills ===
# Pack your puzzle into the box which you brought along.
# Shut-down all equipment, in the following order: Laser-cutter, water-cooler, and PC.
# Don't forget to donate — your contribution to the not-negligible power consumption 😉.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.'' The same is true for laser cutting jigsaw puzzles -- most likely, things will not immediately work, so here a few things I learned so far and other may profit from this experience:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Without a sacrifical material underneath your workpiece, puzzle pieces may will be cut incorrectly (purple ellipses) if tilted. Or they are cut only partially (purple rectangle), if the pieces left the party early.]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
* If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The lamella distance was bigger than the 2cm puzzle pieces of my first try.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:37:45Z

B--rian: /* Image Preparation */

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress, still learning
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg contains both the image and the jigsaw pattern as layers. However, the pieces are rather small and the image is too dark.

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# Choose a high-resolution color image for your puzzled wo. Adjust the brightness, contrast, and saturation using photo editing software.
# Convert your image to black-and white, using the method "[https://en.wikipedia.org/wiki/Dither dither]"
# Designing the puzzle pieces using a tool like Draradech (Manuel Kasten)'s amazing [https://github.com/Draradech/jigsaw Jigsaw SVG Generator].
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.
# You want to bring a little box or bag to put the puzzle pieces in, to carry them home safely.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

=== Tidy up and pay the bills ===
# Pack your puzzle into the box which you brought along.
# Shut-down all equipment, in the following order: Laser-cutter, water-cooler, and PC.
# Don't forget to donate — your contribution to the not-negligible power consumption 😉.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Without a sacrifical material underneath your workpiece, puzzle are pieces which are cut incorrectly (purple ellipses) since they are tilted, or only cut partially (purple rectangle), if they left the party early.]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
* If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:31:03Z

B--rian: /* Image Preparation */

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress, still learning
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like Draradech (Manuel Kasten)'s amazing [https://github.com/Draradech/jigsaw Jigsaw SVG Generator].
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.
# You want to bring a little box or bag to put the puzzle pieces in, to carry them home safely.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

=== Tidy up and pay the bills ===
# Pack your puzzle into the box which you brought along.
# Shut-down all equipment: Laser-cutter, water-cooler, and PC.
# Don't forget to donate 😉 — your contribution to the not-negligible power consumption.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Without a sacrifical material underneath your workpiece, puzzle are pieces which are cut incorrectly (purple ellipses) since they are tilted, or only cut partially (purple rectangle), if they left the party early.]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
* If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:17:04Z

B--rian: Cleaning up clutter.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress, still learning
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.
# You want to bring a little box or bag to put the puzzle pieces in, to carry them home safely.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

=== Tidy up and pay the bills ===
# Pack your puzzle into the box which you brought along.
# Shut-down all equipment: Laser-cutter, water-cooler, and PC.
# Don't forget to donate 😉 — your contribution to the not-negligible power consumption.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Without a sacrifical material underneath your workpiece, puzzle are pieces which are cut incorrectly (purple ellipses) since they are tilted, or only cut partially (purple rectangle), if they left the party early.]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
* If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:16:09Z

B--rian: /* Recipe */

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.
# You want to bring a little box or bag to put the puzzle pieces in, to carry them home safely.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

=== Tidy up and pay the bills ===
# Pack your puzzle into the box which you brought along.
# Shut-down all equipment: Laser-cutter, water-cooler, and PC.
# Don't forget to donate 😉 — your contribution to the not-negligible power consumption.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Without a sacrifical material underneath your workpiece, puzzle are pieces which are cut incorrectly (purple ellipses) since they are tilted, or only cut partially (purple rectangle), if they left the party early.]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
* If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:11:58Z

B--rian: /* Learnings and remarks */ Rearranging sentences.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Without a sacrifical material underneath your workpiece, puzzle are pieces which are cut incorrectly (purple ellipses) since they are tilted, or only cut partially (purple rectangle), if they left the party early.]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
* If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:08:50Z

B--rian: Yet another wiki-link.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], [[LaserCut_5.3|Lasercutter-Software]]
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:08:05Z

B--rian: Adding wiki-link.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software= [[Gimp]], [[Inkscape]], Lasercutter-Software
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:07:10Z

B--rian: /* Learnings and remarks */ Moving the picture around.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software=Gimp, Inkscape, Lasercutter-Software
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).]]

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:06:39Z

B--rian: /* Learnings and remarks */ Picture and caption added.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software=Gimp, Inkscape, Lasercutter-Software
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.
[[File:LaserCutJigsaw WhatWentWrong.jpg|alt=Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).|thumb|Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).]]
'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T14:04:45Z

B--rian: /* Learnings and remarks */

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software=Gimp, Inkscape, Lasercutter-Software
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.

Other common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

File:LaserCutJigsaw WhatWentWrong.jpg

2025-02-20T14:03:07Z

B--rian: Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).

== Summary ==
Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle).
== Licensing ==
{{CC-by-sa-4.0}}

Project:Jigsaw Puzzles

2025-02-20T12:12:02Z

B--rian: Change to bullet list.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software=Gimp, Inkscape, Lasercutter-Software
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

* Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
* Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
* Make sure that the engraved picture is not too dark.

'''Nota bene''': This is WIP (work in progress), so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 2025, February 20th

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T12:06:01Z

B--rian: Adding learnings.

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=[[User:B--rian|B--rian]]
|team=
|materials=4mm poplar plywood, e.g. [ (no affiliation)
|tools=[[Laser_Cutter|Laser Cutter]]
|software=Gimp, Inkscape, Lasercutter-Software
|cost=Up to now:
* [https://www.hornbach.de/p/bastelsperrholz-pappel-297x210x4-mm-din-a4-pack5stueck/3841377/ A4 poplar sheets] 3,45€
* machine running donnation: 0,80€
}}
__TOC__

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==
The following recipe is '''not''' complete yet!

=== Image Preparation ===
# '''Select and Prepare the Image:''' Choose a high-resolution color image for your puzzle. Adjust the brightness, contrast, and saturation using photo editing software.
# Dither the image.
# Designing the puzzle pieces using a tool like ...
# Using a vector graphics tool like Inkscape, check the outline for your puzzle.

=== Preparation for Machining ===
# We have to ensure that all the puzzle piece lines are recognized by the laser cutter as cutting paths.
# Choose a laser-friendly material such as plywood or acrylic, see [[https://wiki.comakingspace.de/Laser_Cutter#Possible_Materials_(Cutting/Engraving)|Possible Materials]].
# Set the laser cutter parameters (speed and power) according to the material being used, usually provided by the laser cutter's manual.

=== Get physical ===
# Start up the water cooler.
# Switch on the laser cutter.
# Send the design from the laser cutter software to the machine by hitting the "Download" button.
# Secure the material onto the laser cutter bed.
# With open laser cutter lid, hit <code>Start</code> which will simulate the actual cutting. The red positioning laser allows you to check, whether you will stay on your piece of material.
# If everything looks ok, close the lid, and go for it! Monitor the laser cutter during operation to ensure nothing catched fire.

== Learnings and remarks ==
Thomas Eddison supposedly once said ''I never once failed at making a light bulb. I just found out 999 ways not to make one.''. The same is true for laser cutting jigsaw -- most likely things will not immediately work, so here a few things I learned so far:

- Don't make the puzzle pieces to small, otherwise the knobs of the puzzle pieces may easily break.
- Stop the laser immediately, if the plywood dissappears unexpectedly through the surface grid into the waste bin drawer.
- Make sure that the engraved picture is not too dark.

PS: This is WIP, so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 21:24, 19 February 2025 (CET)

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T11:56:36Z

B--rian: Adding the first draft of the recipe.

Project:Jigsaw Puzzles

2025-02-20T11:31:37Z

B--rian: /* Introduction Puzzles */

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=B--rian
|team=
|materials=Plywood
|tools=Lasercutter
|software=Gimp, Inkscape, Lasercutter-Software
|cost=tbd
}}

== Puzzles Examples ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==

PS: This is WIP, so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 21:24, 19 February 2025 (CET)

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T11:31:09Z

B--rian: Adding a thumbnail picture

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=Jigsaw_Failure_01.jpeg
|status=work in progress
|date=2025-02-19
|initiator=B--rian
|team=
|materials=Plywood
|tools=Lasercutter
|software=Gimp, Inkscape, Lasercutter-Software
|cost=tbd
}}

== Introduction Puzzles ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==

PS: This is WIP, so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 21:24, 19 February 2025 (CET)

[[Category:Quick Projects]]

File:Jigsaw Failure 01.jpeg

2025-02-20T11:30:26Z

B--rian: The first (failed) experiment to use laser engraving and laser cutting to create a plywood jigsaw puzzle.

== Summary ==
The first (failed) experiment to use laser engraving and laser cutting to create a plywood jigsaw puzzle.
== Licensing ==
{{CC-by-sa-4.0}}

Project:Jigsaw Puzzles

2025-02-20T11:25:56Z

B--rian: Adding details to the template

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=
|status=work in progress
|date=2025-02-19
|initiator=B--rian
|team=
|materials=Plywood
|tools=Lasercutter
|software=Gimp, Inkscape, Lasercutter-Software
|cost=tbd
}}

== Introduction Puzzles ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==

PS: This is WIP, so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 21:24, 19 February 2025 (CET)

[[Category:Quick Projects]]

Project:Jigsaw Puzzles

2025-02-20T11:24:28Z

B--rian: Adding template

{{ProjectInfoBox
|project title=Jigsaw Puzzles
|image=
|status=
|date=
|initiator=B--rian
|team=
|materials=Plywood
|tools=Lasercutter
|software=
|cost=
}}

== Introduction Puzzles ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

== Recipe ==

PS: This is WIP, so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 21:24, 19 February 2025 (CET)

Project:JigsawPuzzle

2025-02-20T11:22:14Z

B--rian: B--rian moved page Project:JigsawPuzzle to Project:Jigsaw Puzzles: Easier reading

#REDIRECT [[Project:Jigsaw Puzzles]]

Project:Jigsaw Puzzles

2025-02-20T11:22:14Z

B--rian: B--rian moved page Project:JigsawPuzzle to Project:Jigsaw Puzzles: Easier reading

== Jigsaw Puzzles ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

* https://wiki.comakingspace.de/File:B--rian_HeidelbergCastle_Jigsaw.svg

PS: This is WIP, so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 21:24, 19 February 2025 (CET)

Project:Jigsaw Puzzles

2025-02-19T20:27:25Z

B--rian:

File:B--rian HeidelbergCastle Jigsaw.svg

2025-02-19T20:26:23Z

B--rian: This file is based on https://upload.wikimedia.org/wikipedia/commons/2/24/Heidelberg_-_Heidelberger_Schloss.JPG

== Summary ==
This file is based on https://upload.wikimedia.org/wikipedia/commons/2/24/Heidelberg_-_Heidelberger_Schloss.JPG
== Licensing ==
{{CC-by-sa-4.0}}

Project:Jigsaw Puzzles

2025-02-19T20:24:53Z

B--rian: /* Jigsaw Puzzles */

== Jigsaw Puzzles ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

PS: This is WIP, so please be a bit patient with me. --[[User:B--rian|B--rian]] ([[User talk:B--rian|talk]]) 21:24, 19 February 2025 (CET)

Project:Jigsaw Puzzles

2025-02-19T20:23:10Z

B--rian: Created page with "== Jigsaw Puzzles == Isn't that what comes to mind first, when getting started with laser cutting wood?"

== Jigsaw Puzzles ==
Isn't that what comes to mind first, when getting started with laser cutting wood?

Waiting Lists

2025-02-12T16:28:52Z

B--rian: /* Handheld Router Introduction */

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaxtously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big><br>
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[User:Edgar|Edgar]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:FMO|Frank]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:Edgar|Edgar]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Edgar|Edgar]]
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:FMO|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Chris H]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*Volker
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:Edgar|Edgar]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Edgar|Edgar]]
*[[User:VGE|Vinz]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
**[[B--rian|B--rian]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:VGE|Vinz]]
*[[User:Freegroup|Andreas Herz]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:VGE|Vinz]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[Chris H]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: TBD

'''Waiting Members:'''
*[[User:FabianM|Fabian]]
*[[User:Baumphil|baumphil]]
*[[User:Ol|Oliver]]
*[[User:FranKNG|Frank K.]]
*[[Volker]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

Waiting Lists

2025-02-12T16:26:34Z

B--rian: /* Laser Cutter Introduction */ Adding myself to waiting list.

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaxtously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big><br>
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[User:Edgar|Edgar]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:FMO|Frank]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:Edgar|Edgar]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Edgar|Edgar]]
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:FMO|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Chris H]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*Volker
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:Edgar|Edgar]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Edgar|Edgar]]
*[[User:VGE|Vinz]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
**[[B--rian|B--rian]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:VGE|Vinz]]
*[[User:Freegroup|Andreas Herz]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:VGE|Vinz]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[Chris H]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: TBD

'''Waiting Members:'''
*[[User:FabianM|Fabian]]
*[[User:Baumphil|baumphil]]
*[[User:Ol|Oliver]]
*[[User:FranKNG|Frank K.]]
*[[Volker]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

Waiting Lists

2025-02-12T16:23:43Z

B--rian: /* 3D Printer Introduction */ Added myself to the waiting list

An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaxtously.

''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''

<big>'''How to Use'''</big><br>
Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.

==[[3D Printer Introduction]] ==

Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
Time required: ~1h

Next Date: TBD

'''Waiting Members:'''

*[[User:Ed Green|Ed]]
*[[User:Solich|Martin S.]]
*[[User:Edgar|Edgar]]
*[[mobell]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[Pierre 7029|Pierre]]
*[[SteffenK|Steffen]]
*[[AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[B--rian|B--rian]]

==[[Arc Welding Introduction]]==

Tutors: {{#show: Arc Welding Introduction
|?Tutor
| format=ul
}}
Time required: 45 min + 10 min per member

Next Date: TBD

'''Waiting Members:'''

* [[User:Mitja|Mitja]]
* [[User:Utis|Utis]]
*[[User:SvenG|SvenG]]
*[[User:Björn|Björn]]
*[[User:Tom|Tom]]
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[Jakob]]
*[[User:FMO|Frank]]
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]

== [[Chop Saw Introduction]] ==

Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~30 min

Next Date: TBD

'''Waiting Members:'''

* [[User:SvenG|SvenG]]
*[[Volker]] Bold
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Mill Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
Time required: approx. 1.5 to 2 h

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''

Tutors: {{#show: CNC Router Introduction
|?Tutor
| format=ul
}}
Time required: > 1 h (to be confirmed)

Next Date: TBD

'''Waiting Members:'''

* [[User:Ed_Green|Ed_Green]]
* [[User:Olli.Klos|Olli Klos]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:Edgar|Edgar]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[User:StStefa|Stefan Steinert]]
*[[Chris H]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik1000]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Handheld Router Introduction]] ==

Tutors: {{#show: Handheld Router Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Edgar|Edgar]]
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:FMO|Frank]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:VGE|Vinz]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]

==[[Horizontal Bandsaw Introduction]]==

Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na

Next Date: TBD

'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Chris H]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
* [[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*Volker
*[[User:AssifLC4|Assif Levy]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Jointer-Planer Introduction]] ==
Tutors: {{#show: Jointer-Planer Introduction
|?Tutor
| format=ul
}}

Time required: 60 min + 15 min per member

Next Date: TBD

'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Meyerml|marcel meyer]]
*[[User:Edgar|Edgar]]
*[[User:StStefa|Stefan Steinert]]
*[[User:MaliMae|MaliMae]]
*[[User:DMaennle|David Männle]]
*[[User:Jan K.|Jan K.]]
*[[User:Enkum|Esther]]
*[[User:Haifischfutter|Markus K.]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Laser Cutter Introduction]] ==

Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
Time required: ~2h

Next Date: TBD

'''Waiting Members:'''

*[[User:Olli.Klos|Olli Klos]]
* [[User:Christoph|Christoph]]
*[[User:Loewenstein|Jan]]
*[[User:Edgar|Edgar]]
*[[User:VGE|Vinz]]
*[[User:Juli Frank|Juli Frank]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]

== [[Metal Lathe Introduction]] ==
Tutors: {{#show: Metal Lathe Introduction
|?Tutor
| format=ul
}}

Time Required: 2-3h

Next Date: TBD

'''Waiting Members:'''

*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|David Männle]]
*[[Erik]]
*[[User:AssifLC4|Assif Levy]]
*[[User:VGE|Vinz]]
*[[User:Freegroup|Andreas Herz]]

== [[Table Saw Introduction]] ==

[[Tutors]]: {{#show: Table Saw Introduction
|?Tutor
| format=ul
}}

Time required: ~ 1 h

Next Date: TBD

'''Waiting Members:'''

* [[User:Ozel|Oliver]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:SteffenK|Steffen]]
*[[User:VGE|Vinz]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

== [[Vertical Bandsaw Introduction]]==

Tutors: {{#show: Vertical Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1.5 h

Next Date: TBD

'''Waiting Members:'''

*[[User:DMaennle|David Männle]]
*[[Chris H]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[User:Hypernode|Johannes Stegmüller]]

==[[Woodturning Introduction]]==

Tutors: {{#show: Woodturning Introduction
|?Tutor
| format=ul
}}
Time required: ~ 1 h + 20 min per person

Next Date: TBD

'''Waiting Members:'''
*[[User:FabianM|Fabian]]
*[[User:Baumphil|baumphil]]
*[[User:Ol|Oliver]]
*[[User:FranKNG|Frank K.]]
*[[Volker]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:Ronanb|Ronan]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|David Männle]]
*[[User:Enkum|Esther]]
*[[User:PaulVZ|Paul VZ]]
*[[User:Jan K.|Jan K.]]
*[[User:AssifLC4|Assif Levy]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Hypernode|Johannes Stegmüller]]

[[Category:Introductions]]

User:B--rian

2025-02-12T15:36:54Z

B--rian: Hello world. Link to printables.

I am new to the CoMakingSpace (as of winter 2024), but not new to making things.
I am mostly working with wood and PLA, you can find my 3D models at https://www.printables.com/@brian/models

B--rian

2025-02-12T15:26:59Z

B--rian: created redirect for user page

#REDIRECT [[User:B--rian]]

User:B--rian

2025-02-12T15:26:59Z

B--rian: create user page